Thank you for this. You could have made a 5 minutes long video but no, you went beyond of just a showcase and your thoughts and actually shared some general airbrushing tips and tricks and for that I thank you greatly. Subscribed.
A nice one take honest review. Agree with all you said. I'm going to give high flow a try. Been using createx and its getting expensive and harder to obtain in UK. Looking forward to the ps290 which is on my shopping list. The supplier you mentioned is good to. Thanks.
Nice informative review Rob, I've watched a lot if your vids and didn't realise you got so close to your work with the airbrush so that camera angle was really good. I think the helicopter at the beginning was probably the police looking for Jurgen!! OMG!! what's he done now 😱👀😂
Lol! You answered my question. I was about to ask your thoughts on the side feed vs the top feed. Are you a mind reader? What was ration mix on the paint. Thanks love your channel. Always learning from you. Your ability to explain things are just great and so calm and soothing and offcourse the artistic ability. This maybe too soon to ask but who wins ps771 creos vs cm sb micron? Thank You very much for sharing your knowledge..
Hi Jesus c thank you for being part of the channel and giving me some feedback it's much appreciated 👍regarding the creos ps771 in my eyes it beats the micron I don't use my micron any more I would rather pick the creos up
The only thing you will benefit from is the mac valve the 270 is a very nice brush that gets super down on detail 👌 not tryed the one you Have so it's hard to say for me
Hi can i ask you a question, i couldnt find an answer anywhere. i get clogging every 3-4 strokes with my ps270. i only just got it. i tried thinning, retarder, different psi. i use createx illustration colors. it drives me nuts, because it doesnt seem to happen with you.
Hi give the brush a good strip down clean the nozzle and body of the brush at the font end with a dental brush first off👍 then have a look at your paint It could be grainy try a filter with it then thin it back 👍 if your doing detail run the brush around 20psi and work from that you can then use the mac valve And bring the psi down if you need to 👍hope this helps you out don't stress it's all a learning curve
@@dredfxcustompaint Thank you VERY MUCH ! I will try what you suggested. Yeah its very confusing at the beginning. So many Variables, pressure, paint, thinning ...
Thank you for this. You could have made a 5 minutes long video but no, you went beyond of just a showcase and your thoughts and actually shared some general airbrushing tips and tricks and for that I thank you greatly.
Subscribed.
Great reviews, probably the best I've seen on these airbrushes. Mine arrived today to partner the PS290, thanks Rob!!! 😄
I went ahead and purchased this brush and WOW. It sits in the hand really nicely, performs great and I prefer it to my Iwata. Well worth the money.
Just watching this video & the police helicopter is flying over the house. LOL Great video _ I am considering buying a creos after watching :)
Great brush 👍 thanks for giving us a look
Thanks for all your help with airbrushing I just started after 20 years and it is not as easy as you think. Thanks
Your welcome Ron
@@dredfxcustompaint thanks for everything
A nice one take honest review. Agree with all you said. I'm going to give high flow a try. Been using createx and its getting expensive and harder to obtain in UK. Looking forward to the ps290 which is on my shopping list. The supplier you mentioned is good to. Thanks.
Thank you David ps 290 tomorrow that's my favourite brush at the moment thanks for watching all the best rob 👍
Nice informative review Rob, I've watched a lot if your vids and didn't realise you got so close to your work with the airbrush so that camera angle was really good.
I think the helicopter at the beginning was probably the police looking for Jurgen!! OMG!! what's he done now 😱👀😂
🤣🤣I think your right John thanks for watching
Great review. That looks to be a lot of brush for the money. 👍
That brush is well worth the money and would recommend it all day long 👌
Lol! You answered my question. I was about to ask your thoughts on the side feed vs the top feed. Are you a mind reader? What was ration mix on the paint. Thanks love your channel. Always learning from you. Your ability to explain things are just great and so calm and soothing and offcourse the artistic ability. This maybe too soon to ask but who wins ps771 creos vs cm sb micron? Thank You very much for sharing your knowledge..
Hi Jesus c thank you for being part of the channel and giving me some feedback it's much appreciated 👍regarding the creos ps771 in my eyes it beats the micron I don't use my micron any more I would rather pick the creos up
@@dredfxcustompaint Team Creos !!!!! Love it.
@@coolkids2064 😁🤘
Im an idiot. I never even thought of “aiming” I just go at it
does look a good brush that 🤙🤙🤙🤙🤙🤙
The small airline seems to be designed for using ‘instant air’ from spray cans.
Would you get this brush if you have the iwata HSBC. 2mm ?
The only thing you will benefit from is the mac valve the 270 is a very nice brush that gets super down on detail 👌 not tryed the one you
Have so it's hard to say for me
Hi can i ask you a question, i couldnt find an answer anywhere. i get clogging every 3-4 strokes with my ps270. i only just got it. i tried thinning, retarder, different psi. i use createx illustration colors. it drives me nuts, because it doesnt seem to happen with you.
Hi give the brush a good strip down clean the nozzle and body of the brush at the font end with a dental brush first off👍 then have a look at your paint
It could be grainy try a filter with it then thin it back 👍 if your doing detail run the brush around 20psi and work from that you can then use the mac valve
And bring the psi down if you need to 👍hope this helps you out don't stress it's all a learning curve
And if your thinning createx illustration use distilled water 💧 👌
@@dredfxcustompaint Thank you VERY MUCH ! I will try what you suggested. Yeah its very confusing at the beginning. So many Variables, pressure, paint, thinning ...
@@blenderheadxyz2418 your welcome if you have any other problems along the way just drop me a message 👍
@@dredfxcustompaint Thats very kind. Will do :)
It's CREOS>>>
My bad 😅🤓
Glad I purchased it and like reviews
Thanks for the feedback David it's a great brush you will have no dramas with that 👍 mine is still going strong and is coming up to
Two years now