Це відео не доступне.
Перепрошуємо.
Fitting a 180 rear tire on the Indian Scout Bobber
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 18 сер 2024
КОМЕНТАРІ • 275
Наступне
Автоматичне відтворення
How to Install 240 Tire on Indian Scout Bobberoxouk
Переглядів 56 тис.
Will a 180 tire fit an Indian Scout Bobber?dadwithabike
Переглядів 18 тис.
Indian Scout Bobber Test - 1000PS Bobber Vergleich 20181000PS - die starke Motorradseite im Internet
Переглядів 125 тис.
🔥 Уся правда про українську СУДЖУЗе Інтерв'юер
Переглядів 347 тис.
😳 Все русские уже знают итальянский?🇮🇹Super Italiano
Переглядів 6 млн
РЕЙНДЖЕРС - ДИНАМО | Ліга Чемпіонів. Кваліфікація Q3 | 13.08.2024ФК «Динамо» Київ
Переглядів 332 тис.
Indian Scout Fender Delete (Bobber Project!)BLOCKHEAD
Переглядів 78 тис.
YORK Shorty GP Muffler. Indian Scout Bobber Exhaust RemovalRicky Bobber Moto
Переглядів 79 тис.
2018 Indian Scout Bobber - How to remove front and rear wheels DIYCliff Cares
Переглядів 16 тис.
Smooth Out Your Indian Scout’s Rear Suspension With These Easy TipsBlue Collar Outdoors
Переглядів 9 тис.
I Bought the MOST Expensive V Twin Motorcycle on AmazonBikes and Beards
Переглядів 14 млн
So You Want an Indian Scout Bobber...Yammie Noob
Переглядів 186 тис.
The Scariest Monster in Sports History - Alexander KarelinVoteSport
Переглядів 7 млн
Life With The 2021 Indian Motorcycle Scout Bobber - Lifestyle Motorcycle GearFreddie Dobbs
Переглядів 75 тис.
I Bought the Most Expensive V Twin Chopper Motorcycle on AmazonBikes and Beards
Переглядів 3 млн
🤯 ЗДУРІТИ!🔺КУРСЬК: куди дійшли ЗСУ? 🦾 Наступ на Росію ЗВІЛЬНИТЬ Донбас? Новини від ЯніниYanina Sokolova
Переглядів 604 тис.
🔥 Уся правда про українську СУДЖУЗе Інтерв'юер
Переглядів 347 тис.
Обязательно запомни эту хитрость, что можно сделать из клеевых стержней!#shortsДелай сам
Переглядів 2,4 млн
«Це край, де я родилася й живу! І нікуди я звідси не поїду» #shortvideoСуспільне Запоріжжя
Переглядів 537 тис.
РЕЙНДЖЕРС - ДИНАМО | Ліга Чемпіонів. Кваліфікація Q3 | 13.08.2024ФК «Динамо» Київ
Переглядів 332 тис.
«Ми так війну не закінчимо ніколи»: 22-річний морпіх про те, чому їм потрібні молоді #війна #зсуСлідство.Інфо | Розслідування, репортажі, викриття
Переглядів 697 тис.
а ты любишь париться?KATYA KLON LIFE
Переглядів 2,5 млн
Вони ЛЕДЬ ХОДЯТЬ! КЕП в ефірі сказав ТЕ, про ЩО ВСІ МОВЧАТЬТСН
Переглядів 838 тис.
ATTENTION!!!! This message is not to hate on Jay Fast videos. its just a service announcement. I do not recommend putting a 180 tire on stock rims of a bobber. I just did it to mine and it makes almost no difference in the width of the tire. The small rim pinches the tire down to a 150 tire size. Save yourself the extra 100 dollars for the 180 and all the extra hassle and frustration of trying to get a 180 tire to get the bead to seat on stock rims. just get the 150 tire unless your willing to mod the whole rear end so you can use a proper rim for a 180. Its a waste of money and sanity to use a 180 tire on stock rims. It makes little to no difference in the width of the tire once you get it on the stock rim. just do the 150 on stock rims
I never measured the wheels mounted. You could be right? I was just trying out different things. Worked for me. Running victory octane rims now for the last few years with pirelli rally str tires. Been great
Absolutely love your videos and your time and patience to walk people through good job and keep up the great work.
Buford Reyna thanks man. That’s really great to hear!
You made changing that tyre look so easy. Great video 📹 👍
I totally recommend it. I’ve done three sets for myself. And two for buddies. That’s more than paid for the tools and balancer.
It is totally a pain in the ass. But it’s also fun!
Honestly, Indian should have made the Scout and the Scout Bobber with a 180, looks wicked. Nicely done, Bro...
Arturo Gatti I agree. The tank is so muscular. And then a skinny rear. Like I said. Looks like a dude that skipped leg day.
i'm taking off my belt guard, have never taken off a motorcycle wheel. Thanks, looks pretty easy, just nuts n' bolts right! hope all is well!
duuuuude! just followed this vid along and changed my own tires on 19' bobber! keep up the great work man! ur killin it!
That’s awesome! It’s a pain. But worth it.
Dude. Awesome video. Best I’ve seen of how to change tires yourself. I’m looking at a scout so this just lets me know I can save $$ doing this myself. Great video
You are always so professional and informative! Great video!
Tyler Hartwick i like you both with a beard. And without a beard
@@jay_fast thank you sir!
The most underrated channel on UA-cam.
Most Genuine guy i have ever seen on internet.🙌🙌
Great video buddy👍
kushagra tiwari hey man! That’s an awesome thing to say! Thanks for taking the time to enjoy the channel. Hope you stick around.
@@jay_fast for sure man. I am myself planning to buy Indian scout bobber next year.
kushagra tiwari you won’t be disappointed. They are an amazing bike.
Get a 90° valve stem extension. I put it on, check my pressures/top up and remove. Carry it on the bike in case of emergencies. I agree, stock valve stem is rediculous
"Looks like a guy that missed leg day". Classic!!!
😎
12:28 "Little Bites, a Little Persuasion, Lots of Lube". Sounds like a first date! Great video, interested to know if you experienced any notable handling changes with a slightly wider rear.
Nice vidéo good look with 180
sometimes you can feel the join in side the tire and that's your heavy point , so that goes opposite the valve
kiwozif1 👍 that’s a great tip. Didn’t know that.
Another great video, love what you do bro 💪
Tim Raja that’s awesome to hear! Appreciate it
Bro you still good ! The tire didn’t pop , you ride until you die . rough rider !
+Tac0 Man I know. I kinda felt bad it didn’t blow. I’ll do better when I recycle this set.
Looks good and great work. You are surely going to have to burn the "new" off that sucker.
wow great job...Bike looks sick like this bro!! way better IMO...thanks for sharing 🔥👍👌 cheers🍺
Thanks so much!
Great job as always! 👍
Definitely needed more meat. One of the perks of the 109 coming stock with the 240 😛. I wanted more meat and went 250 tho 😛
You just helped me change a tire, saved me money,and taught me something…..can I call you ‘dad’?
Yes. I find this acceptable
Looks great. Why did you go with 180/65? I see the stock are only 150/80. What size front did you go for?
Great job fitting. I'm considering a change too. Getting prices for Avon Cobra, Michelin Commander II and Dunlop D404 tyres.
I just wanted a beefier tire. I felt like the front of the bike is so muscular. The rear needed some beef.
The from is a MT90b16. I have no idea what that sizing is. But it fits.
I did get the avon cobra chrome's but i got factory size though i love the tires
no riding video WTH lol
Scout bobberman 5.56 they will be coming. I have a 5000km road trip happening in 17 days to Southern California. They get a workout and lots of video coverage!
Hell yeah, I was waiting for this video, I read once that the 180 tire brush with the side lincense plate holder but apparently not. I see the rear of the bike taller, do you adjust the suspension or something to fit the tire? Excellent video as always!
+PacoMtzRoman no suspension adjustment other than setting the preload to me weight. But that doesn’t rise the rear end. The shock is at full extension when at rest. I still bottom out sometimes on hard bump and no rubbing.
If you do go 180 just make sure the tire is intact 180. Some tires say 180 and are actually a bit wider.
Did you order your service manual directly from Indian? I’ve looked on the website and can’t find one for my 2020 Bobber. Only service manual I find is for 2015-2017 Scout.
OMAR MORALES
www.service-shop-repair-manual.com/search.php?search_query=scout+bobber
Good evening,would like to know about the front wheel support you got,
and also the service manual. I do own a bobber exactly like yours with corbin seats
And a keyless start . Might think of exhaust love the sound of your bike.
Been watching your channel,very knowledgable. Keep going... thanks, JPIERRE.
Jean pierre Despres the front wheel choke is from baxley trailer co.
I bought it used. Paid $75. It’s worth every penny. Love that stand. There are many other brands out there as well.
The service manual is not an official one. It’s a photo copy version. It’s not colour. The official ones are colour and they are quite nice.
www.service-shop-repair-manual.com
Loved the video, I like knowing what size sockets I need to order before I perform the job and this hit the spot. I always wonder why they don't mention nut/bolt sizes in the tech manual. I made a video on changing my tail lights on my Bobber. It was a pain. But I think it's easier outside of the US because you have a 4 wire CANBUS, right? My video should be up soon if you want to see what I had to go through to get tail lights on my Bobber
Gordon McAllister ya. I’d love to see it.
Subscribed
@@jay_fast Thank you, I just uploaded the video. ua-cam.com/video/l_M38IFF25A/v-deo.html
Good stuff dude👍🏻
Brandon Wright thanks. Got some new tires for the bobber. The cobras still have lots of life in them. Bought a second set of wheels off eBay. Going knobby
Hi, great vid I learned a lot.
However, did you get the rotation direction on the front tire wrong? Looks like the water would get pushed to the middle not outwards…? Back looks right.
Great video. Which exhaust is that?
Vance and hinds grenades 2 into 2
I tried reading through everything so apologies if this has already been answered: HOW DOES IT RIDE compared to the stock tires with the fat sport tires? Looks great but the ride matters, too.
thx!
Ron Fox no it’s all good. It’s hard to say because I wore the stocks down so much they were pretty much flat. So they rode like shit. Which made the new ones feel great.
But I’ve also changed the seat and changed the shocks in those times. So. My opinion may be skewed. However. I’ve now got over 5000miles on them and just a few burnouts. They grab road really well. Bike feels good in corners. I would buy them again.
Jay, is that a Avon 180/65/16? if so have you had any clearance issues or problems with them on stock rims? thanks, great video!
joe dukatz yes. It’s 180/65/16.
I really like the tire. Handles great. Holds the road. Great durability. If got about 6000miles on it now since about June I think? Been great. Totally recommend. Did my 4000mile California trip on them. No rubbing. No clearance issues.
Zero issues at all. In fact. I highly recommend.
Excellent video
ST1300ful awesome. Thanks.
Great vid!!! It helped me a lot!!!!! Thanks!!!!!
Awesome! How’d it turn out?
@@jay_fast oh!!! It looks great and rides smooth! Thanks again!!!!
my scout rogue has a 19inch in the front, what could I do to change it and make it look more bulky? change to a 16" ?
If I remember correctly I couldn’t find many options for a wide 19”.
So ya you may have to get a smaller rim. EBay was where I got mine
greetings from PR, What is the maximum size of tires that can be used on the rear wheel?
I am pretty certain on this. But not 100%. But I don’t believe you will get anything wider than a 180 rear tire regardless of wheel width. It will hit the rear subframes. So unless you modify them you are limited to a 180 rear.
Can I change my sportster's stock rear 150 tire to 180/65/16 without changing the fender or doing a chain conversion,
Not sure. Never owned a sportster
just checked , the avon cobra 180/70 16 measures 25.8 , are these the ones you got? and theres no problem putting it on the stock 3.5 rim?
Terrance Amone non. As shown in the video. Went on without issue.👍
good to know brother , thanks , ill post video after i install rear 180 , thanks again for all ur help i really appreciate it 👍🏽
Terrance Amone ya man! Anything else feel free to DM me on Instagram. Some times these comments get lost in the mix.
Hey Jay, great work my friend 👍,just got scout bobber 2019 ABS and I really wanted to change the rear tire to 180/65/16 but u think I need any kind of kit or something just because I have the ABS or that doesn't matter it should work anyway with or without the ABS ?
Rafic Hanna it shouldn’t make any difference.
That intro reminded me of Shamless USA 😂 that 180 looks pretty bad ass.
+Dazzle Яebel Rides ha. Ya. Had just watched a few episodes before making that video.
Hey man, how did the 180 tire ride on the scout? I just got myself one and took it to the dealer to see about a wider tire and they told me "that's not a thing" to put 180 on this. Obviously, I don't believe that. Did you have any issues? What do you recommend as I'm looking to put on a wider tire without doing any modifications to the bike?
Putting a 180 tire on a 3.5” rim is beyond the spec of what’s recommended by tire manufacturers.
However. A 180 tire will mount and not hit on the frame. I’ve put over 6000 miles on the 189 with zero issues. I loaded the bike up with gear and cruised from Victoria, British Columbia to Southern California.
The issue with the 16” rims front and rear is it leaves tire selection lacking. There aren’t many options.
Since then I have purchased some 2017 victory octane rims witch are a 18” front and 17” rear. Many more options and bolt right up. I have a video out on that.
But yes. I like my bike with a 180. I think it looks great. Handles great and I’d do it again.
The new 180 tire fits the stock 3.5 16inch rim??
Yevgeniy Simonovich ya man. As shown in the video.
Hey Jay great work my friend 👍 , I just got the scout bobber 2 months ago and really wanted to get the 180/65/16 just not sure if I need any kit or spacers cause I have the ABS, or u think it has nothing to do with it will work anyway with or without the ABS ? Thanks man .
Rafic Hanna personally. I don’t think there would be any interference. Hit me up on Instagram. @Jay_fast
I’ll send some pics of the clearances and such
Hello buddy, I wanted to ask how things are with the 180 tires so far? Did you have any significant problems or other notes? Thanks in advance for your answer and greetings from Germany
Nope. It was a great upgrade. I highly recommend. Looks great and rides well.
Great video.Im fitting a 180/70 metzler cruisetecWould you have any idea what the tyre pressure would be for that.Obviously Indian doant recommend that.Thanks
I found running them a bit less than factory spec made the bike run quite well. You may have to play with the pressure. But it would only fluctuate a few psi.
How did you rate the 180 after getting a bit or time on it?
Kai Willaims really enjoying the tire. Is wearing really well. Worked great on the trip. Will most likely buy again.
@@jay_fast I'll go something similar when I change mine thanks
those were the stock wheels with 180 tire?
Paul DE GUZMAN stock wheels yes. I added a 180 rear
Solid video! Subbed!
I have many more. Check them out. I haven’t posted in a while. New kid. New house. Full reno. But I will be back at it soon.
Nice video! Did you have any trouble seating the beads on the stock rims with the 180 tire?
No. They went one really easy.
I’m curious on what psi you run the rear tire at for your 180?
Great video, thanks for posting it. I noticed you have a workshop manual in the video , would you mind letting me know where to get one from? Here in Australia there is nothing available and when i got my first service done on my new Springfield the Indian dealership left the oil filter completely loose resulting in oil leaking everywhere on my 1.5 hr ride home! I wont repeat what i said to them but very keen to get a Scout Bobber and Springfield manual to do things properly myself. Thanks mate
Awesome. Thanks for the comment!
There are a few PDF’s floating around. If you are a member of online forums in sure someone has them.
I bought a print version from service manual warehouse. Can’t remember what I paid but it was probably close to $100. Could be less. Been a while now. But it wasn’t Color. You want it in colour. They now offer it as a pdf. I think it’s like $25.
If I was to do it again I’d buy the PDF and take it to get printed in colour.
@@jay_fast awesome thanks 👍
Hi jay. Do you know of any other tire of the same size will fit ? Or it has to be the cobra ?like the pirellis you installed with the victory rims. Will a pirelli same size as the cobras you used here for the rear work ? Thx man.
From everything I’ve gathered. Anything 180 or narrower seems to fit. If you want to go wider then you need to do some rear sub frame work.
I’ve run a 180 cobra and night dragon on stock rims. And as you saw 180 pirelli on octane rims. All have plenty of clearance.
Love your videos. I had a request. Can you find a way to install a electric exhaust cutout on indian bobber ?
They already make one for the scout.
www.jekillandhyde.com/en/brands/indian-exhaust/scout
Jay, could you tell me if you notice a negative change about the performance after to install the new wheels? Do you recommend me this change?
Alex Paulino I think it’s totally worth it. The bike rides great. Confidence inspiring. I would do again.
Great video. Where did you get that front stand?
is 180/70r/16 will fit on scout bobber ? or it has to be 180/65r/16 ? thanks
Alex Niazy the 180/70 should be fine. It’s just a tiny bit taller. At 65mph. You’ll be doing like 66.2mph on the taller tire.
Great and informative video as usual. What is the exact part # of the tire, and also is it Avon’s Cobra or their Cobra Chrome model. Lastly, do you know the brand and model of your front wheel chock stand? Thanks!
raisingcane225 there are Avon cobras. They have been discontinued. The chromes are just the new models. It’s just a no name stand. Really good though. Highly recommend. Condor makes a really quality one but they are spendy. I’m sure one can be found used for less.
Might end up doing this to mine. My garage has had it in for 2 days just for new tyres and break calliper cleaning. “Apparently” the Kawasaki dealer doesn’t have the correct rear size wrench and has had to get one from home. Oh F right off with that BS.
Such a shame as them and Honda are the only garages near me other then two unbranded garages but one is expensive and the other is well ok. Hate my town so much, starting to think about moving away now.
Hopefully you get your bike back soon and can ride!
Hopefully you can get your bike back soon and can ride!
Did you ever figure out a 90° valve solution? Doing a tire change next month so want to get rid of that straight valve. I read somewhere the Chief 90° stem fits?
Bronze_bobber no I haven’t done anything with it.
Great video. Had a question whats the max size of tire you can go on the back? I wanted the same size as the Harley vrod fat tire?
Rene Fonseca you have a few options. If you good fat tire kit scout on google you will see a few options. But they are spendy. you can also do a rear subframe delete for the scout or bobber. This eliminates the rear fender. You can fit a 240 but will need a custom wheel. I don’t know the max on a scout (I think 170) but a 180 is the largest a bobber will accept if you keep the stock rear fender.
The bobbers rear subframe and fender mut be wider that the regular scout ? I thought they said I couldn't do this on the scout
Mr Mr you could be right? I’ve never owned a scout. But on the bobber. I can say that the 180/65r16 will fit a stock rim and will not rub at all. Even at full bump.
Hows the tyres going? I am looking to switch them on my bobber. Looked at cobras. Worth it??
Paul Ashford yes. I would get these tires again. They grip really well and wear excellently. I’ve got about 8,000km on them now. Plenty of life left. That’s when the stock kendas were needing to be replaced.
@@jay_fast cheers mate. I'll go for it I reckon. 👍
Paul Ashford I recently purchased some different wheels. Should allow more tire options. But the Avon’s are 👌👌👌👌👌
Awesome video.
I just got my 180/65/16 from UPS. Cost me $200 and change online. Emailed my dealer about putting it on for me this was his response. " The subframe (rear frame member) is ~187mm internally so that 180 is going to be a tight fit. If you hit a big enough bump and bottom out the rear suspension you might have tire-to-subframe contact." Any issues like this ? Sounds like he doesn't want to do it. Your thoughts ?
100% not an issue. I just did a 4000mile round trip to California with about 80lbs of gear on the 180. I bottomed out a few times on the really big bumps on the freeway. I can say 100% that there has been zero rubbage. With the Avon cobras. Some tires are a bit wider/narrower than advertised. But the cobras def fit.
Jay Fast thanks man. After speaking with them again the response this time was “ it’ll probably be fine, but we just have to say it “. Lol getting it done this week. Safe riding !
Dang I just bought a puig valve stem and it looks a lot like that. What brand was yours?
It’s a triumph motorcycle valve stem
@@jay_fast nice. So puig didn’t fit either. I ordered oem ones and replaced them. Hopefully someone sells a 90 that will work. :)
I have the part number in an Instagram post. @jayfast
@@jay_fast oh you got one to fit??
It always looks easy on a video. In reality I'll probably be yelling, " get off that rim you son of a bitch!!!" and then after calming down I'll be yelling, " get on that rim you son of a bitch!!" Sometimes being successful means just having some confidence in yourself and knowing there is always a way. This video shows people that they can do something they didn't know they could. I'm a big fan on doing things myself...peace out..
Why do I keep hearing you have to delete the fender if you put 180 on? Seems like it fit just fine from your video?
On a stock rim. It fits fine. But the stock rim is narrow. I run octane rims now. They are 4.5” wide vs 3.5”
I think a 180 is supposed to be on a 5.5 or 6”? In which case it starts to rub.
But a 180 stock rim. No rubbing
1 year later how did that 180 hold up and did it change the feel of your ride any negative effects ?
@@josephramos3777 I'm curious as well
Do you think I could go with the same tire, but just a bit bigger diameter: 180/70r16?
It will just through your Speedo off as the circumference of the tire will be different
What kind of wheel stand is that ?
I’m assuming you mean the wheel balancer? It’s from motion pro.
hi very beautiful with this bigger tires... you just mounted them...no other mods needed?
Takezo Kensei yep. Nothing else needed.
Correct. No other mods needed. The front is stock at 130. You can fit up to a 180 on the rear without any modifications
Enjoyed your video. Is the front tire installed the wrong direction or am I bugging?
Well shoot. Now I have to look! But I am running Victory octane rims now with Pirelli tires. You should check out that video too!
Nice vid Jay.. looking at replacing tires on my 2022 Bobber this weekend. Mind sharing the torque for rear wheel bolt? I heard you mentioned it for the from wheel, but couldn't hear what you said for rear wheel, is it the same 55 ft lbs?
Axel nut torque is 65ft/lbs
@@jay_fast tried doing it today, struggled to access the axel bolt. It's hiding behind the exhaust, had to take the exhaust out. I have Indian Shorties exhaust. Do you have any ideas on how I can make it easy next time? Use the torque wrench on the other (belt/side) while holding the bolt with spanner wrench on th other side?
@@drifter-indian1448 no. That will give you an incorrect reading. Sucks. Unless you have enought suspension droop to maybe line the bolt so you can get it between the exhausts with an extension. But even that will skew a reading.
Might just be a thing you have to remove the mufflers/tips for. Should only need to do it every so often??
@@jay_fast yeah, gave up for now. Will het back to it tomorrow. Bike if off the lift, but I need to torque it before taking it out. I also feel that the belt is rubbing the inside wall of the belt Guard near the sprocket. Need to get it back on the lift tomorrow and fix it.
@@jay_fast thank you very much for the vid and the answers to my comments. Really appreciate it.
What size did you go with on the front?
Will McGee MT90b16
Thank you sir
cool!!!What size is your front wheel?
Avon didn’t have an exact match to the front. But I put in a MT90b16
I'm sure you've been asked this numerous times but since it's been a while how do you find it on 3.5 rim..I'm thinking about doing it but I'm very aggressive into corners and don't want to worry about performance or potential blow out
I have quite enjoyed the swap. It’s a good tire. Inspires confidence. I did a 4500 mile round trip just after installing them. I don’t run it any more because I put victory octane wheels on because I wanted to run knobby tires. But I would go back in a heart beat.
These bikes don’t let you lean the bike over very far anyways. I have found no Weird handling quirks after the swap. I really like it.
The tire mounted by hand. I’m not over stressing it. Besides. As far a mods go. A tire is under $250. So if a guy doesn’t like it he can always swap back. Cheap in the world of motorcycle mods.
Great job! Wish I can put those tires on my Bobber! But I guess german police wouldn't let me drive anymore, if the check the bike! :-(
Ratko Majkic i was watching a mighty car mods episode and they went into the regulations you have and the Tüv inspections. It’s sounds pretty hardcore
Jay Fast unfortunately it is. They check everything and it has to be only that way the let you have it. Need an extra technical check für the K-Tech Bullit rear suspension. They don’t care, that a shit load of Bobber owners have them in the USA. 😔
the tire fits on scout sixty?
Yes
I dont know why people think they need to move the belt/chain adjusters.
Kenny Hoover I swapped my adjusters for billet pieces.
Is this the ABS model?
No. Non abs
What front bike stand is that?
It’s just a cheap chock I found locally used.
I have a condor stand and it’s good. Expensive. I like this one better.
Would any 180 tire fit the indian scout bobber Or specifically the Avon cobra tires?
So far. I haven’t found or heard of any that don’t. I’m sure there are some out there. The stock 16” rims will keep you somewhat limited in the 180 wide tire. The octane rim I put on after this is 17x4.5”. Had many more options. But I also fit it with a 180
@@jay_fast another quick question if you don't mind answer do you any other wider rim that would fit the bobber or the victory octane's the only rims?
@@santi8751 yes. There are aftermarket option. A 180 tire is the widest you’ll be able to run without removing the rear fender and subframe.
There are kits out there that give you a new fender and rim. Will allow you to run a 240 rear
Hi, what brand of stand is that you are using for the front tire? Thanks
The old front tire looked fat; was that stock oem tire? if so, what was the width on that?
TITOBANG74! Yes. It was a stock front was 130/90-16 rear was 150/80-16
Jay Fast nice! Your video has made want to purchase an Indian Scout now. Beautiful bike ❤️❤️❤️
TITOBANG74! Do it. At least take it for a demo. Such good bikes!!!
im
lookin to do the same thing to my 2018 bobber, so when u bottom out , how bad is it? any damage back there to the fender , or anything else.. I am lookin at the Shinko 777 front and back set up , im lookin for reassurance lol , let me know
Unfortunately with the stock suspension. Even with preload properly set to my weight I still bottom out somewhat often. But the tire does not contact anything. The over all height and circumstance is the same as the stock tire. It’s just wider.
well i weigh about 175,, we will see what happens, the 180 looks bas ass, the stock 150 is just too skinny for our bikes, changed my mind on the tires, gonna go with Michelin Commander 2
Wassup , i have 1 more question for you , I found some really nice Michelin Scorcher 32 for my Indian , Tire has that nobby look, prob is the come in 180/70 16 ! u thin this will work or would it be too tall , again i weigh about 170 ish , let me know what u think , google the tires , let me know what u think , thanks for ur input brother 👍🏽
Terrance Amone so according to the tire calculator. It is taller. But not by much. Just under 1/2”. Based on the rear sub frame layout you should be ok. It will put your speedo off a bit but it’s based off of a percentage. So at low speeds the difference will be non notable. At 20mph you’ll actually be going 20.3 mph. But at 65mph you’ll be going 66.21mph.
Not a big deal in my opinion. However. Just because a tire says it’s 180 doesn’t mean it measures 180. Some are slightly bigger or smaller. And it’s that 180 measurement that will get ya. Because the tire gets close to the licence plate mount. But I do agree. I like the scorcher. Looks good. But pretty sure that’s the HD tire and it has little HD symbols in the side wall. If yup can get past that. I say try it. Worse case you sell them.
The hight on the scorcher is 6.90 and the width is 25.2 , what are your specs on the Avons?
Hey I didn’t know Kyle Sandilands rode bikes ?
Cool !
RexyFan I don’t know who that is. I’ll have to google them
Jay Fast
Well known Australian radio host, who also was a judge on Australian x-factor tv show.
RexyFan sounds like he can afford multiple bikes. I’ll take it!
Hey man where did you get that service manual you’re referencing?
I ordered it online. It came pdf and then I printed it. I think I paid like $40. I think
Here I believe. The one I got didn’t come color. Which isn’t awesome. The manual highlights parts in colour which is very helpful. You have to double check it has colour. I didn’t know when I ordered.
servicemanualwarehouse.com/amp/indian-2018-scout-bobber-service-manual/
minimum rim width for 180 cobra is 5'''. the scout rim is 3.5'''. a wider tire will not fit properly on a narrow rim,
Serban Matei you may be correct.
I’m just saying it will physically fit. As you can see in the video no special tools were needed to spread it over the rim. The bead seated nicely. Ive got over 5000miles on them now. Both in the twisties and loaded up on a road trip.
The 180 rear works great. Looks great. And I’ll be doing it again when the time comes to replace it.
how wide is the factory wheel? {rim}
XboobtubeX I believe it’s 3.5”
How do you set the dynamo wrench for rear and front tyres bolts?
Takezo Kensei the torque specs?
Front 52ft/lbs or 70nm
Rear 65 ft/lbs or 88nm
Sorry i don't speak inglish
Cuáles son las medidas de la llanta delantera???
Miguel Coapango Avon didn’t have an exact match. So I went with a mt90b16
what brand is your front wheel stand?
I bought it used.
Baxley trailer co.
Worth every penny. Love that stand
is front tire is 180 as well ? thanks for sharing
No. The front is a MT90r16. It’s very close to the stock size. They didn’t have an exact match.
Is there a way to change the rubber belt to a metal bike chain?
Diego Vargas I don’t know anyone that’s done it. But zipper performance has a kit
www.zippersperformance.com/all-products/performance-kits/for-indian-victory-models.html
Could you give the size and brand of the rim?
It’s the stock rim. 16x3.5
The washer on the right side seems to be installed with the wrong side to the bike.. Should be turned arround I think
lars garrido what time in the video?
Minute 21.53
What year is it
The bike is a 18. The rim is from a 16 victory octane. Maybe a 17?
What size did you put on the front?
What kind of lift do you use for the bike?
What happened to your license plate?
As in what happened to the top of it? It was bolted on at the top and the vibrations stressed the metal and it sheered off. Had to use more bolts to keep it flat
@@jay_fast I'm about to change my international tail to the 50 state version after watching your video on it. Great tutorial by the way. I guess I should be using 4 bolts to secure it. Do you think the wind played a role as it's side mounted?
@@Jason-mt2gf the damages happened while it was on the international tail piece. Been fine since side mount.
@@jay_fast Oh. I'd better go have a look at mine.
Two wrenches to remove deez nuts.
xBadJoKERx lube helps
What do you run on the front ?