AMPSEAL Connector Instructions

How-to instruction video for TE Connectivity's AMPSEAL connectors.
Visit www.te.com/ict for more information.
Contact Insertion
1. Grasp crimped contact approximately one inch behind the contact barrel.
2. Check that the wedgelock of the plug assembly is in open position. Align the contact with the applicable cavity.
3. Insert the contact into the connector cavity until there is an audible or tactile click. A slight tug will verify the contact is locked in place.
4. After all the contacts have been inserted, close the wedgelock by simultaneously squeezing locking latches inward and pushing the wedgelock into the housing.
Contact Removal:
1. Insert the tip of a screwdriver between the edge of the plug assembly housing and one corner of the wedgelock.
2. Gently pry the edge of the wedgelock until it is released from (but not completely removed) the housing. Repeat these steps for the opposite corner of the wedge.

[@EPSUJATeam]

Thx, we love u

[@Stirmeli]

At 1:22 the instructions state "254 mm", but it should be 25.4 mm. 254 mm would be 10 inches.

[@carlmen6567]

That's what I was going to say

[@jonsimmons4150]

Garbage one use throw away connectors.