I did this job yesterday and had to remove the ac condenser. Its a pain. The snap ring is very difficult to remove from this installed angle. Taking the bottom plug cover is easy. It uses either a socket or toex bit to remove. The snap ring will NOT go out unless you tap the plug inside enough to give the snap ring clearance to get out. Then you have to pull the plug out which is a bit difficult due to seizing. Then insert long needle nose to extract the dryer assembly tube.
So i replaced pretty much everything on my 2010 F150 Ac system but the evap coil. The air blows only at 63 and we know ot should be in the 40s. The condenser came with the bag dryer but the Ac compressor kit came with thay plastic one. Lomg story short i ended up modifying that plastic one to fit . My question is do yoi think the plastic dryer is causing a back up and not allowing it to cool properly?
Thank you because your video help me
I did this job yesterday and had to remove the ac condenser. Its a pain. The snap ring is very difficult to remove from this installed angle. Taking the bottom plug cover is easy. It uses either a socket or toex bit to remove. The snap ring will NOT go out unless you tap the plug inside enough to give the snap ring clearance to get out. Then you have to pull the plug out which is a bit difficult due to seizing. Then insert long needle nose to extract the dryer assembly tube.
fixing to change out my dryer is the dryer still working that you put in and what kind of car or truck the year model was thanks
When you looked at the compressor (car on) was the ac compressor turning with the clutch the whole time as if it was always engaged but no cold air?
Thanks
Is the ac still working good with the alternative dryer from the kia ?
Hi, is normal for the compressor cycle every 7 seconds ,after replace txv and pressure switch 24 oz. Of freon on 2013 Ford f150?
So i replaced pretty much everything on my 2010 F150 Ac system but the evap coil. The air blows only at 63 and we know ot should be in the 40s. The condenser came with the bag dryer but the Ac compressor kit came with thay plastic one. Lomg story short i ended up modifying that plastic one to fit . My question is do yoi think the plastic dryer is causing a back up and not allowing it to cool properly?
What was the symptoms that makes you change it ?
Does anyone know if it is necessary to replace the expansion valve if the reason my compressor failed was a seized pulley?
Friend stay under the shade tree•Good try
Those are torx bits dude.
How did you remove the snap ring? I'm have trouble removing it.
Those are called Torx.