Nissan Maxima & Altima - No Start- Push start button unresponsive repair (steering lock failure)
Вставка
- Опубліковано 4 жов 2024
- How to diagnose and repair your 2008-2009 Nissan Altima or Maxima no start, no crank, no anything issue.
Bring old batteries back to life: letsgetit.vip/...
Nissan OEM steering lock (amazon): amzn.to/2jkbBvE
Twist socket set (amazon): amzn.to/2iprYra
Bosch PS21 driver (amazon): amzn.to/2jkfcdb
God bless you for this video. It's people like you that make this world a better place.
thank you. I really appreciate it. Be sure to subscribe and hit that thumbs up button.
YOU ARE THE MAN!!!! THANK YOU THANK YOU THANK YOU!!!! I literally had my 09 Altima for 2 days and it stopped working, UGHHHH!!!!
My 09 Maxima had that same exact problem and this video was great. I followed it step by step and it fixed the problem. The dealer tried to tell me that the key needed to be programmed and they needed to do it. As the video states the key does not need to be programmed. Just swap that part and your car will turn on again. Great video!! Saved me alot of $$$
im glad it helped...There is a recall on that part now. If you paid for it contact your dealer and ask them about the steering lock recall. you can get reimbursed for whatever you spent on it.
@@Autofixpals
Do we need to programme the system related to steering lock when the part is replaced.. Or it is just replace then start the engine??
@@kdwdmdn Plug and play for everyone that i have done so far.
Thank you for this wonderful work. Thanks to you, you saved myself from a great loss. The owners of the workshops take advantage of us and give us faults that do not exist.
I bought a new 2008 Nissan Maxima and had this problem from the start .The dealer told me to push the brake and turn the steering wheel and it worked , but has had this problem for years. I guess they hadn't discovered this problem until 2009. Some times the remedy doesn't and I keep trying till I finally get it going. Thanks for the great information.
EXCELLENT video!! I REALLY liked the part when the other guy came to you and asked "How did you get the car started?", lol. This video was very informative which will help out a lot of people, thanks!
Astral Auto Repairs I'm glad you liked it.. Thanks for checking it out.. The guy that asked how I got it It started thought he had the wrong key, which is pretty much the symptoms of a failure in the steering lock.. Of it were my vehicle I would just bypass that thing altogether. The part retails for 700 bucks at my dealership. About 500 online.
he thought he had the wrong key..lol but yeah that's the symptoms you get
How do you bypass it?
Seems like a great video. But why u didn’t show us how the car started after replacement of the part
I have a Altima as well and it was a recall on the ignition lock....they fixed mines for free
yup recall came out after i made this video. Call your dealers people, chances are that this repair can be done for free and you may be able to be compensated for past repair.
You’re the best man !! I didnt replace it i just unplugged the fuse and put it again and it worked. Tho i dont see the relation between starting the car and steering lock failure
Unplugged the fuse?
Where’s the fuse located???
Best video I've seen on this EVER! Cheers 🥂
Great video. Still seems like I'm doing at least 4 of these a month. Doesn't it always seem to be relates to the change in seasons? And I like your little hack tool. I'm just a mini rubber mallet guy , think I have that sweet spot licked when given a little love tap. Hard work trying to show this on camera, hope everyone appreciates it like I do.
ONBOARDTECH333 that's a brilliant idea.. Never even thought to give it a wack to see it starts working again.. Thanks for that tip.. We see at least 3 a week at the dealership.. Yup Change in weather definitely has some play in it..
Thanks for your support. Best way to help to just share my videos. Really appreciate my subscribers, you guys are awesome.
'll
Can you please elaborate? Are you saying, instead of replacing just tap steering lock "somewhere" may work? Really appreciate if you can provide some details. Thanks
Tapping the steering lock is a temporary solution.
Thank you so much for this incredibly detailed video! So detailed that I’m for sure going perform a DIY on my Infiniti. Sucks that the part is like 350$ though. Subscribed ✅
Did this work on your Infiniti? Having the same issue
Thank you my friend good information 👍 where ever you are..
My pleasure
Awesome video there Sir!!!! Great info on troubleshooting the problem and the repair!!!! Thanks!!!!
They issued a recall for the 09/10 maxima’s and altimas they had the push button since it was such a common failure
Bad ass vid bro i woulda never guessed thats the problem lol
Hey guys! Before hitting it try looking at the fuses on the positive terminal connector. One of mine were blown and it caused the intelligent key light. It costed $25 for a new one at autozone and was easy as hell to fix. Hope this helps someone.
What fuse was it?
Great tutorial video,do the keys need to be reprogrammed again.thanks for your help.
This happened to me. I was stranded and had to get my car towed to the nearest Nissan. The killer part is they have been replace the steering lock on the 2009 Altima, but my car wasn't included and had to pay for the service.
Me too.. I had to get it swapped at the dealership but able to get the recall part. I paid 367. The best thing for people to do its report it so there can be a recall or service campaign. There is one right now but it is only for a select few. Report it to the National Highway Traffic Safety Administration that is the only way you can get reimbursed or get it swapped for free. The NHTSA will notify Nissan to do a service recall or service campaign announcement.
Will try this!! Hope it works, thanks!!
Did it work?
......or...try to hit the steering lock with an hummer while pressing the start button...if it starts then pull off the steering lock fuse while unlocked and it will stay so!!!
fantastic tip !
i would've liked to have seen your repair confirmed by starting the car
Thank you for the helpful video
Nice video I have same problem won't opens ignition try all other way and no luck I just tap on the steering wheel it run but shout i chance it ?
So if I'm understanding correctly you just install and no programming necessary? That's the vibe I get from reading comments from others that purchased this part. BTW you can get this same part for much cheaper.
Great video. I have to do a 2007 Altima Monday. It starts but the dash doesn't light and it won't come out of park. Any tips before I start?
I have a 2010 Nissan Maxima, got in with key fob, but it was displaying "no key" tried both of the key fob's, so it wasn't a dead key fob battery. All I did to fix it was pull the neg. cable off of the battery for about 5 min. Hooked it back up, got in, and the car started. Try this before anything else. Car alarm might go off when you re-connect the cable, but it will stop after a min.
Omg, can u please help me. I have a 2010 Maxima SV also. And i tried that with the battery, and i tried doing the code check also and no code came up. I put about 5k into this car in a year. Its breaking me, i work an hour away.
Hey I hope you see this I have the same issue but I can still start my car with a jump, I’ve replaced the battery and have had suspicions that it may be the ignition switch
I have 2012 Altima.. Would this be an issue or is it just the alternator..... Man... Cause I see all kinds of shit it could be.????? help me.....
I have the same issue, but I don't see the part under the steering wheel? Could it be somewhere else?
Great video thanks.😁👍🏻👍🏻👍🏻
No need for reprogramming? I had same issue with a 2008 Land Rover LR2. I was reading about reprogramming if the column lock were replaced.
Okay people I just had this exact problem. Turned out to be the ECU fuse. ECU Fuse! I changed the Brake Light Switch, The Battery, The Key Fob Battery, and beat on the Steering Wheel Lock Mechanism. Then I had her towed to Nissan. They Blessed me. ECU/ECM was not communicating...ECM/ECU Fuse was blown. They only charged me for diagnostic and the fuse. $93.
Thanks so much
I would be more interested in how to make the test bypass tool you made.
If anybody does not know this Nissan has issued a recall for this problem on the 09 and 10 Altima’s and Maxima’s that do that if you already had it fixed you will need to get a copy of your receipt your dealer should have it and they will reimburse you for it as well as replace the part again
what kinda by-pass gadgetry do you have
Why would you replace the bolts with the same weird break off ones nissan uses?
I just pulled the fuse for the Locking solenoid...no problem ever and who needs the steering locking anyways.
Which fuse is that?
I have a 2007 nissan altima , Thursday I ran out of gas, so I went to the gas station, bought a gas can put 10 dollars in it and then I tried to start it still wouldn't start it would only go to the accessories and on position but wouldn't start..i went to autozone and bought some jumper cables but that didn't work either...its displaying a yellow key sign while it's off could it be the steering lock module? I switched the brake light switch already and I tried to bang on it already didn't work any ideas what it could be?
starter or starter controls. if it goes to the on position than its not the steering lock. no response or single click is likely a failed starter. But thats only a guess. Diag would have to be done to be certain. Get it towed to a competent shop.
Fuel pump gave
Thanks bro good 👍 job
Have m35 that does the same thing but its worse off to where the push button doesn't even illuminate and no dash anything but all fuses and relays good any idea? All I know is It has good battery and everything and went from working fine and parked it to not working at all now
I have a 2013 JX35 and the push button work light come on but it won’t start .. any idea of what that might be
I am having trouble removing the old sockets for the steering lock. Are there any alternatives?
I’m experiencing this same issue in my 2010 Nissan Maxima I was at fault in a accident and the car has been repaired completely as of tomorrow and it won’t turn over so is this the scenario in which the car you are repairing is in or did this just happen over time
2009 Maxima was dead today. It was jumped earlier but now wont start again with jumper cables. Battery was replaced Nov 2015 and again under warranty and now we are having this issue. Any advice? Is it the battery?
it was a recall you can fix it at a nissan dealership no charge
My altima is all dead, no lights show on dash or if the push start is tapped..... nothing. Could this still be the issue?
I have a problem with my transmission, the code is internal speed sensor, I have a 2016 Altima
Amazing bro thanx a ton
So there is apparently an OEM part that bypasses this mechanism. Part # 48708-9N00A , I have yet to try it but is less than $70, much cheaper than the OEM Steering Lock.
On my car the dash lights come up when I try to start it, is not until various attempts and pressing the button hard that it starts.
Do you need to do any re-programing?
same thing happened to my 2009 Infiniti g37. im about to do this
I know this video is old but I have a question. I just bought a car from the police impound. They dont come with keys. I had the lock Smith there try to make a key and he said that the steering lock got broken from their tow truck driver and when its broke you cant program a new key. So I just went a got a new style one from junk yard . My question is when I put that nee steering lock on it doesnt need to be programmed to the car right it's just plug and play ? Thanks for your time
It does need to be reprogrammed.
@@martinvazquez303 the box needs reprogrammed or the key
@@cincinnatiresellking5537 the key
My 2009 Altima Hybrid has the key light and security light flashes I had the steering lock box replaced by the dealership and it’s not the brake switch! What could it be?! Help please! I have a road trip planned for months and this just happened! 😭
What did it end up being I have the same issue
What is the maximum is not equipped with a steering lock
I replaced mine and tried resetting my key but now my key does not work, any advice ?
0:10 You are not stepping on the brake pedal, You Say it's the correct fob? how do we know? You may miss place it!
Thanks boss man 👊
This did not work for me. I had to get it swapped at the dealership but able to get the recall part. I paid 367. The best thing for people to do its report it so there can be a recall or service campaign. There is one right now but it is only for a select few. Report it to the National Highway Traffic Safety Administration that is the only way you can get reimbursed or get it swapped for free. The NHTSA will notify Nissan to do a service recall or service campaign announcement.
The same problem is happening on all these Nissan's.. like muranos and rogues.
Yup! There are several people on forums who literally remove the fuse responsible for the steering lock just to avoid it from going bad. I’m thinking of doing the same thing once I replace this expensive part.
@@martinvazquez303 which fuse is it? That is kind of braindead
What's the labor for that job?
Omg, i bought a 2010 Maxima SV. Wont start. It had 80k when i bougbt it only had over a year and half, i must of put over 5k into it already, its breaking me and i work an hour away from home, im scared to drive the car now
What if the light come on just doesn't start
Hello there. Changed the steering lock. Still the same thing. Do we need to delete any fault codes from the scanner??
No, the steering column lock it's plug and play. That was my 09 altima hybrid culprit. Take your ride to any Nissan Dealer, they'll fix it for free (recall lol).
Hey did you Just change the Lock Column or just remove and reinstall the same one ? Currently iam facing same problem my 2011 Altima.
replaced with new one.
If u mind me asking what happened I’m going threw this now
My 2012 maxima sv is kinda doing the same thing. In the middle of driving my car died. Tried to jump but got nothing. I replaced the battery and got nothing but the key light and the push foot on brake. My interior lights come on but nothing else. My doors won't lock either. Anyone know what it could be and if it's the same thing?
And I went and did all this and under my steering column I don't have one of those
My 2010 Juke now been off road for 10 weeks, same problem, replaced the steering lock module but it still won’t start unless we bypass it, I really don’t know what else to do as nobody seems to be able to fix it, Im desperate to getbit going but just can’t seem to get it sorted
Juke? Try the brake switch by just shaking the connection at the brake pedal
Jose Garcia finally got it fixed, needed a steering lock module plus Nissan computer & keys reprogrammed, expensive but car runs great again thanks
I have Nissan micra k12 Diesel engine same problem with my car steering lock not working and in Cluster yellow key light comes.. plz help can i bye pass steering lock .. on pcb three switch ..
Thank you for the information my friend God bless you...
Well my unrecognized key light isn’t on I believe my battery is just dead
Thanks.
Is this something a locksmith can do?
I'm having a similar problem I have a 07 Nissan Altima hybrid..was on the highway and the gas pedal didnt work..make a long story short had it towed home..everything comes on but the push brake keeps coming on and the car wont move...plssssss helppp
What happened going threw the same thing
I'm a manager at a mechanic shop and we have a 09 maxima that will turn over but wont start we replaced the ipcm and no fix but if we by pass the fuel pump relay it will fire up but cut off 5 seconds later what could it be!!!!!!!!
do you have a security light flashing on staying on constant when you crank the vehicle? check for security/immobilizer DTCs with a scanner.
Solved the problem!! Ended up being the ecm computer
Do all Altimas' have this steering lock? I have a 2011 that i replaced the main computer in. trying to re register the key to the car but i will not work, not matter what I do. I got the 4 digit pin code for the BCM from the dealer. It just keeps telling me the conditions are not met. I can put the intelligent key in the cylinder and push the button, and the dash lights will come on like normal. But if I step on the brake and push the button, nothing happens. No crank. I can hear the fuel pump turn on when i push the button and theres a P1612 in the module all the time. I assume because the key is not programmed. Wondering if the issue is the lack of the steering wheel lock. I took the cover down and see there is no steering lock on this car. I see where it would go, but theres nothing there.
Hey did u ever get your car running again I have the same exact problem
What if you don't have the steering lock but my car was running fine until this happened
Where are you located
Way if it's the alternator??????
My steering wheel won't lock and my car won't start in have an 09 altima. Is it definitely the module?
Hi, I'm a locksmith here seeing this happen on 2 cars now and they all happen to be Hybrids. I cannot program another key to the car because I believe this is the issue. I'm wondering if there's a way to relock the steering lock.
@@SneekyFauker did you ever figure out a solution ?
@@cincinnatiresellking5537 I did. If you see the yellow key light flashing then it's a sign that the steering lock has went out. All I did was replace it. You might have to program back the key to the vehicle but I can't remember for that. There's 2 kinds of steering locks. There's one that came out after the recall and before. I went to a junkyard and replace it with the newer one and all was good.
I'm having this problem now car still won't start had it towed home don't have money to repair. Nissan needs to be sued for a recall and replaced this problem 🤦🏽
If what you have going on is this problem then it is now covered under recall. Call Nissan dealer give them your VIN number and have them check to see if it applies to your vehicle.
How and where does the by pass go ? How do you make one ?
its made out of an old steering lock. Call Nissan and see if your vehicle is covered under the recall for the steering lock.
@@Autofixpals I don't own a Nissan. But I'm trying to trouble shoot an 09 Nissan Maxima sv customer said he hit a bump and everything turned off. IV checked all my powers and grounds Nothing nowhere.not even the little key light for when the antitheft is activated. Im narrowing inn on the BCM.
@@westtexas501 did you check battery terminals and ground cables? Also fuse at the battery posts.
@@Autofixpals absolutely there all good .
Greetings: "Bypass tool" - 5lb adjusting device.
Hello i dont know what is going on. I order the part from ebay new for about $275 dollars. It came today i install it and nothing happen. Its still showing the yellow key fob sign. please help me out please
Emmanuel Uko
Hello ...I have same problem I replaced it but it still not starting
New part needs to be reprogrammed to be recognized.
@@David_USC the key fob needs re programmed?
It's not the steering lock.....2012.... It's not....mbattery....
What was it? Break petal switch. Should always update solution.
I just came from Nissan dealer they told it need to be programmed, is it true? Please anybody has a clue?
Thanks
How much is a reprogramming?
@@C000DY I did not ask how much reprogramming but the part they need to replace is $500. Hopefully they they not going to charge me programming. The value of my car $2500. It is crazy if I have to pay 1000 😳
I am having the same issue with my 09 Altima. Is this the same piece that some guys recommend to "bang" to get it unlocked and start it up?
JFAR1980 yes it is.. however there is a new recall on this part. call the dealership they will fix it for free.
JFAR1980 pc516 is the recall number. Google it
Thank you! Indeed, I am in Mexico and recalls here are valid a couple of years afterwards. I am having this very same problem. Just called the dealer and the part is close to 200 USD here, plus $35 labor. Your videos are of great help. Thanks for posting.
So, to make a long story short, this video was very helpful for finding the part. I banged it 4 times with a steel piece and the car came back to life and was able to start! As other notes say, this part is defective and needs replacement. I just had the car checked by dealer (in the city of Queretaro, México) and confirmed that the part failing is the ESCL. They quoted $9,500 MXN (just short of $500 USD) to have the part replaced (part number 48700-9N00B), including labor. I called Nissan Mexicana to request them to honor the voluntary recall that Nissan North American is implementing for having these cars fixed. Even while my car was sold in Mexico it is the same Altima sold in the USA, it was assembled in the USA, it is the 2009 model, and the failure and affected part is exactly the same. Everything is technically the same as for the cars covered by the bulletin. However, I got the obvious answer: "the bulletin is for cars sold in the USA by Nissan North America, your car was sold in Mexico by Nissan Mexicana and is not covered by the recall". Just like that.
At the end, the conclusion is that this failure in the USA is considered "due to a defective part that needs replacement" (as per the bulletin). If the car was sold in Mexico to a Mexican customer it is considered "natural wear and tear" as mentioned by the Nissan Mexicana representative that looked at my case.
Anyway, I am paying for the fix now. And I will certainly file a complaint against Nissan Mexicana in Mexico for this. Unless they can demonstrate there are technical reasons for the problem in Altimas sold in the USA vs those sold in Mexico to be different, they have no reason to consider it "natural wear and tear" in Mexico while they have acknowledged that the problem is a defective part in the USA.
JFAR1980 that's terrible.keep at it.
Hello please what is the name of the socket? do you said twin socket? THanks
Emmanuel Uko turbo Socket. Links I the description.
Thank you for showing how to get the stupid safety screws out. So riddle me this Batman: if you can get the safety screws out using an easy-out socket why not just put a regular bolt instead. Either way they're going to come out.......DUH!!!🙄🙄🙄
Is this for alternator or wat????
Not 2013
How can open scru what 🔧 no
He said buy the special cheap ten millimeter socket from AutoZone that takes out bolts.
That's NOT the problem. Brake Switch/ Cruise Control...that's why u unplug FUSE sometimes it works sometimes doesn't. Brake light switch 10 out of 10.👍💯👍💯👍
Dont do anything this guy is doing the point is to save money there is plenty of ways of eliminating that part this guy just doing it the expensive way i took mine out and did some work on it like adding a screw so it wont spin and you dont need new one this video nononono
This guy seems like a shady creep but this might be helpful...
Please who has the part number
i have the newest updated version available. whats your email address?
REPLY
How much?? I took my car to the dealer they installed the updated version with no lock but my car still won’t start 1 week later no start going back to the dealership for a third time.
What
2:20 says he has wrong tool, but been taking that piece off for so long he knows how to get it off without damaging it..........yet still has wrong tool for so long
I was wrong. I should have said the only wrong tool is the tool that does not get the job done.... what i said was "i have been doing this so long that i know how to get that peace off without damaging it". One can assume that it means i don't have trim panel tools. But that assumption would be incorrect. It simply means that I know how this car is put together and i can get that panel off using whatever i have handy. I have successfully removed it with an ink pen, pocket screw driver, a key, my bare hands and yes trim panel tools.
The steering locks failed often enough that we some times do the repairs in the parking lot.
I dont a have fuse on steering lock can it still lock?