Mr. DIY How to replace a outdoor wall faucet with a Woodford Model 19
Вставка
- Опубліковано 29 сер 2024
- Mr. DIY replaces an outdoor wall faucet that has been damaged during a hard freeze.
Mr. DIY goes step by step to show you how to replace and outdoor wall faucet
Mr. DIY replaces damaged outdoor faucet with a Woodford Model 19
Mr. DIY uses a Shark Bite fitting to replace outdoor faucet
I like that you didn't hide the fact the hose fell back into the house. And instead chose to isolate the mistake, and show us how to prevent it. Thanks.
Glad to know I don't have to cut open the wall to replace a leaking Woodford 17.
My husband is NOT a handyman. Nor am I so thank God for UA-cam videos. This is the first I've watched that actually showed the hose. (I was clueless as to what was inside the wall.) Hopefully after hubby watches this and other videos about fixing leaky outside faucets, we will tackle this project!
More than likely you do not have this setup so if your Sill-cock is not going into the crawl space you will then have to cut into the wall to get to the plumbing system and if that is what you will have to do then it is best to cut into the Sheetrock from inside to do this but don't try doing it from the outside it is easier to repair Sheetrock and not the Siding.
This is just what I need. Thanks so much.
Thanks! That's what I needed to know.
I don't always let my hose bib freeze, but when I do I use Mr. DIY.
He doesn't always drink water, but when he does it's from an outside faucet.
For a minute I thought Sheriff Rosco P. Coltrane was after me when I heard that music
this was very helpful! thanks!
Is that the most interesting man in the world!?
We are on a slab and out outside shucker is leaking even after replacement of the guts
rectum-sel yellow leaves bad taste for a while.use teflon base...
No worries there will be more to come thanks for watching.
How is the repair holding up?
Do you know what brand/model of faucet the damaged one is? Doesn't look to be a Woodford given there is teeth on the check valve of the stem.
Does the shark bite make a click noise when you push it in? If so, why do you need to mark the depth?
Marking the depth is the only sure way
Perfect... why don't you make a video for this of us who have copper tubing numb nuts?
+Tug_Slug he doesn't owe you anything
Why are u using pipe dope on potable water.
If you do as he explained making sure not to put it on the female side then as it is threaded into the female, the threads on her pushes the dope outward so no dope gets into the water system.
What