Such an artist! I have watched most of your videos and I still am amazed. When you put the power to it, I thought it was cutting the blank too much. Shows you what I know! Great job you!!!!
It’s so great to see you back making videos again. My great uncle had a “pantograph lathe” that he used to use to make gun stocks with for his gunsmithing business. It was similar to yours but different. I remember as a young boy going and helping him in his shop and watching it rotating and tracing the selected pattern as it carved away the excess wood. Loved the smell of the hardwoods as it milled away.
Absolutely fascinating to watch you work through and explain the multitude of variables necessary to create a template off of basically a “Barn Find” existing prop. Way more complicated than making a “Yule Log” 😂 always a pleasure to watch a true craft person keeping a craft alive!
Im building a similar prop duplicating lathe and thus find this vid fascinating. It's wonderful that you're continuing what your grandad started both the business and the impressive machine. I hope you'll wear light gloves during setup and tie your hair back when things are in motion. Thanks for this insight and best of luck in your business.
Amazing equipment and your knowledge shows when setting up the prop and timber. If you have a chance could you please make a segment about caring of your propeller, especially if the varnish and surface is tired and worn from the years of use. What an owner can do, and when an expert such as yourself need to be involved. At the start you mentioned the condition of the propeller but not what made it non airworthy. Thanks
She is so much fun to watch. I have no idea about propellers. Never gave them a thought. But I have a lathe and while searching YT for lathe videos, she popped up and I'm addicted. So straightforward; so pleasant; Seems like a genuinely nice person (Katrina in her cat suit is kinda fun to watch, also). He videos are fun and entertaining and informative and every time I see that lathe is action I'm in awe of the fact it is a home made creation designed by her grandfather. I've seen small pantograph routers and CNC machines, but for the life of me I can't imagine building one of these. I love these.
Really love the work you do, I have been enjoying for a few years now....I think....been sharing your videos to my aviation friends. Best wishes from Florida, Paul
My gosh that looks soooo much like the reverse thrust corvair airboat prop I talked to you about Alaina! Its just shorter. Cant wait to see what it looks like!! Im still watching 🙇♂️
Just stumbled across your channel . pretty neat I must say. I would like to see a video of how you got into this , the inspirations and the whole story ( at least as much as you're willing to share)!
I really like your pattern cutter. Very well made. If you have to shim often I have some simple ideas that would make shimming much faster and easier. If not often, probably wouldn't be worth the time and effort to make the small changes I have in mind. Thank you for posting the video.
Nicely done. Could you possibly sometime introduce us to your little mouse that talked very shortly inbetween as you were setting up the distance for the blade to cut? 😉... Have a nice day! 😊... Had to return. Forgot to say thank you for your time and talent.
Wow! Hung a few but never seen how wooden props are crafted. When i was little my dad was building a homebuilt and remember him walking around the house with his new custom wooden prop but later that night my black lab chewed every inch of that fuckn thing lol looked like an old corn cob next morning
@@CulverProps Nah! Maybe for my dad but the rest of us got a pretty good kick outta it. Nobody understood why he was building a plane that was to small for him anyways lol
I would call all this carving is done by dupicarving from a pattern. A lathe duplicarver is done on a spinning piece of work from a stationary pattern. A follower runs over the master pattern, while a cutter does the duplication in a half of the finished piece. The work blank is swapped end for end and the process is repeated, sanded and balanced, sealed and serialized for shippment.
Retired journeyman machinist here, ran a mill quite a few times. Well made and informative vid, but I was cringing the last couple of minutes. Young lady, do you often run a chip making machine without safety glasses? I know, the vacuum gets the dust and chips, but all it takes is one 'flyer' to gouge a cornea or worse.
@@CulverProps Did you build that copying lathe? I like it! As a motorcyclist machinist I often watch The Wheels Thru Time channel, a motorcycle museum in North Carolina. In it they have a home made cam shaft grinder that works very much the same as your machine.
@@CulverProps So your in Rolla, Missouri! The next time I go to the antique motorcycle show in Davenport Iowa I'll stop in for a visit! At the same time there is The Old Thresher Reunion in Mt Pleasant (labor day weekend), there are lots of old tractors, trains and machinery but no airplanes. It would be a real pleasure of somebody could bring an home made Pietenpal plane! -Stan
Maybe someone else already said this but anyone with long hair should put it up while around rotating machinery. People get seriously hurt having their hair pulled in.
Interesting copy machine. Ad minor comments/queries ..(1) you take great trouble to align the tip with the copy centre, but note not all props have the tips in line with the midpoint of the hub, some have a skew ! by eye the prop is angled up to the right because the hub is out of place, a reference at the same hight for the opposite tip would get the original prop level rather than the hub centred (which may nit be correct).. (2) there are large splits etc in the damaged original propeller that will be copied. It could have been good to "repair" it (to get as close to original shape only, obviously not for reuse) before making the new copy?
Well thing with UA-cam is that there is no way I perfectly describe everything I am doing. No, the center line of the prop does not have to be in the center of the tip of the prop. There are several prop patterns that have off set blades. The 1909 prop made for the Curtis Headless Pusher is made with 2” of cord on one side of the center line and 4” of cord on the other. But the 3 points do have align perfectly for the vertical balance to be correct. Like I said, i don’t go into incredible detail on these videos because they are not made for exact how to, more just to show people the rough idea of how they are made. Thankfully I have been making them from 20 years now and have a good reputation within the aviation community, so although I might not precisely convey every intricate thing I am doing on these videos, it isn’t because I am overlooking an aspect. And the lathe does not transfer those voids onto the pattern. The pattern ended up a little thicker than the original and I will do a final shaping by hand. I can always take off extra material, and will in the final stages of the process.
I always wondered how this was done. Amazing how this is done with old fashioned non computer equipment .Excellent.
It's always fun to see someone show skills like these. All the little adjustments that make things come out right in the end.
Read
This lady has got to be the most glamours engineer in aviation…absolutely gorgeous lady
Thank you! 😉
Such an artist! I have watched most of your videos and I still am amazed. When you put the power to it, I thought it was cutting the blank too much. Shows you what I know! Great job you!!!!
Clearly explained and a wonderful example of a copying lathe.
Thank you.
Thank you!
Watch people build wood wagons, wood boats, & wood props, yes am impressed with hand crafted works, you are great.
Thank you!
It’s so great to see you back making videos again. My great uncle had a “pantograph lathe” that he used to use to make gun stocks with for his gunsmithing business. It was similar to yours but different. I remember as a young boy going and helping him in his shop and watching it rotating and tracing the selected pattern as it carved away the excess wood. Loved the smell of the hardwoods as it milled away.
What a great memory! I am going to a gun show today! 😁
@@CulverProps I could probably design you a hybrid lathe taking the best of both designs. It might be a very interesting project.
I like how her nails are always perfect even though she is doing wood working!
I always wondered how they duplicated items exactly! Thanks for enlightening me!
"WOW!" That was so interesting. Thanks very much and greetings from Yorkshire England. Take care. John.x
Thank you for watching!
Ol' fashioned hard work and American craftsmanship! Love it!
The best kind! 😁
Absolutely fascinating to watch you work through and explain the multitude of variables necessary to create a template off of basically a “Barn Find” existing prop. Way more complicated than making a “Yule Log” 😂 always a pleasure to watch a true craft person keeping a craft alive!
Lol, it was a challenge
Excellent video and the time lapse was fascinating!
Thank you! I try to make them all a little different
That was really interesting. I would have never guessed that's how it's done.
😁
Smart guy, he chose the best to make his propeller, regards.
☺️
A pantograph lathe. How frickin cool. Thanks for sharing such a cool machine!!
Welcome! 😁
So happy to see this vid, it fills in a few gaps in your how-to videos. So Glad you're back also.!.!
I will try to do a few more like it
Love your craftsmanship. Great video, thanks for posting.
Glad you are making videos again, thank you! Very interesting work.
Very informative and entertaining !
Thank you for sharing your craft! I appreciate the work that goes into making props
Thank you!
In sharing you gain more hearts than copycats. Thanks for sharing your interesting craft. Wish you all the best from Green Bay, Wisconsin.
Thank you!!!
Im building a similar prop duplicating lathe and thus find this vid fascinating. It's wonderful that you're continuing what your grandad started both the business and the impressive machine. I hope you'll wear light gloves during setup and tie your hair back when things are in motion. Thanks for this insight and best of luck in your business.
Amazing equipment and your knowledge shows when setting up the prop and timber. If you have a chance could you please make a segment about caring of your propeller, especially if the varnish and surface is tired and worn from the years of use. What an owner can do, and when an expert such as yourself need to be involved. At the start you mentioned the condition of the propeller but not what made it non airworthy. Thanks
Kim Keam: I think you can see in some of the closer shots that the original propeller has delaminated, and is no longer sound.
Nice work! very interesting machine.
Wow! Glad to see a new post. It’s been awhile!? Good to see you’re still at it!✌️❤️
Sure am!
Losing skin is part of a craftsmen's / craftwoman's life.
Thanks for the video.
Lol it surely is.
Your videos are always very interesting. Thank you very much for sharing!
Simple , effective and no computer needed!
Exactly
I CAN’T WAIT to have you guys make me a prop for my Pietenpol. Great video.
I can do it! 😁
First time for me on your channel I don't know why I have been following you on Instagram for a while now. Love your work.
Thank you! I get to go a little bit more in detail on UA-cam and some some start to finish of the same prop.
Really enjoy watching talent THANKS.
Thank you for watching
And she is beautiful too
She is so much fun to watch. I have no idea about propellers. Never gave them a thought. But I have a lathe and while searching YT for lathe videos, she popped up and I'm addicted. So straightforward; so pleasant; Seems like a genuinely nice person (Katrina in her cat suit is kinda fun to watch, also). He videos are fun and entertaining and informative and every time I see that lathe is action I'm in awe of the fact it is a home made creation designed by her grandfather. I've seen small pantograph routers and CNC machines, but for the life of me I can't imagine building one of these. I love these.
Thank you!
I finally figured out who you remind me of Alaina! That country music singer Jewel!!!
Lol thank you!!! I’ll take that!!
@@CulverProps Youre probably more of a trouble make huh? lol what are you doing up at 10 pm? 😆
Really love the work you do, I have been enjoying for a few years now....I think....been sharing your videos to my aviation friends. Best wishes from Florida, Paul
Thank you! I appreciate that!! 😁☺️
Very impressive! Using that copying lathe appears to be a real skill. Not sure many have it. I know I don't! Nicely done.
It has an attitude of its own lol
My gosh that looks soooo much like the reverse thrust corvair airboat prop I talked to you about Alaina! Its just shorter. Cant wait to see what it looks like!! Im still watching 🙇♂️
One time I visited the shop of a guy who made gun stocks. He had a similar, equally cool, setup.
would have liked a longer video .I enjoy watching start to finish
Just stumbled across your channel . pretty neat I must say. I would like to see a video of how you got into this , the inspirations and the whole story ( at least as much as you're willing to share)!
I will work on that
Interesting process. Not seen a lathe like that. Thanks for sharing.
I really like your pattern cutter. Very well made. If you have to shim often I have some simple ideas that would make shimming much faster and easier. If not often, probably wouldn't be worth the time and effort to make the small changes I have in mind. Thank you for posting the video.
Clever stuff! Great result. Greetings from Scotland.
Thank you!
Very cool but I think trying to build a dupelicator like that would be great fun. Thanks for the video.
neat lathe, I've never seen one like that.
Looks like a Banks prop, he made some for me for my airboat in the early 70s, well made n tough for swamp use!
Wowww...Fantastic..!!..Linda Máquina como tú...ji ji ji .. Saludossss
Very cool! Excellent video!! Thanks!
Thank you , I found this very interesting, love your videos.
So cool to watch a Master at work!
Thank you!
Very cute n skilled lady
The machine looks like its thrown together from scrap 😂😂 but what a great job Awesome 😁😁👍👍
There is still plenty hand work left after duplicator, respect these hand workers.
Thanks for video. That was very interesting!
My day usually starts with a knuckle buster as well... LOL
🤣🤣
That's a really nice job your doing there
Thank you!
Such an awesome duplicate,,,l bet the first cut was a little tense waiting to make sure it was right lol great work
Always lol
Lovely job.!
Nice work👍👍😎
Nicely done. Could you possibly sometime introduce us to your little mouse that talked very shortly inbetween as you were setting up the distance for the blade to cut? 😉... Have a nice day! 😊... Had to return. Forgot to say thank you for your time and talent.
Will do! That was my brother lol
@@CulverProps ... Nothing like family love 😊
Thanks, very interesting!
Good to see the video, keep them coming.
I just ordered a kit plane. I will be needing a propeller. So, when the time comes, I'll be giving you a call!
Deal and congratulations!
اهلا وسهلا بك سيدي تشرفت بمعرفتك نعم انا معكم 👍👍🌷🌷🌹🌹🌸🌸😍😍😘😘
Good job !!
Wow! Hung a few but never seen how wooden props are crafted. When i was little my dad was building a homebuilt and remember him walking around the house with his new custom wooden prop but later that night my black lab chewed every inch of that fuckn thing lol looked like an old corn cob next morning
Oh no!!! That’s terrible!!!
@@CulverProps Nah! Maybe for my dad but the rest of us got a pretty good kick outta it. Nobody understood why he was building a plane that was to small for him anyways lol
It's a smart piece of a machine!
That was interesting to watch, thanks for sharing.
Very interesting process.. one suggestion, I would recommend using some eye protection if u aren't using any.. Very nice work...
Thank you, and I do 90% of the time.
@@CulverProps it's that 10% that can hurt us sometimes.. God Bless and take care..
You need a socket set and a ratchet, ya killin' yourself with that nut driver......great video......cheeers
Awesome !!! Cindy Lauper making a propeler....
You are amazing 🙂
Very interesting.
True Craftsman 👍👍👍👍⚒⚒⚒
Brilliant to watch
I like the way she shimmies while she shims
😂
I LOVE that duplication lathe..there HAS to be a story behind it..who pieced it together, when was it invented?
If you go to her channel, watch her videos, she tells her story about the shop and Lathe.
Mr. Culver made it, my grandpa modified it
Você e muito talentosa parabéns
What fun to watch. Please note the important step of flip the hair then run the machine. 9:51
😂😂😂
Very interesting!
I LOVE women that work.
Beautiful
So cool!
Love skills
That was so interesting, thanks for sharing!
Nice Job, do we get to see the end result?
nice job
I would call all this carving is done by dupicarving from a pattern. A lathe duplicarver is done on a spinning piece of work from a stationary pattern. A follower runs over the master pattern, while a cutter does the duplication in a half of the finished piece. The work blank is swapped end for end and the process is repeated, sanded and balanced, sealed and serialized for shippment.
Well done
Great video! You tube won't let me light the bell.
Excellent
nice video !
Retired journeyman machinist here, ran a mill quite a few times. Well made and informative vid, but I was cringing the last couple of minutes.
Young lady, do you often run a chip making machine without safety glasses? I know, the vacuum gets the dust and chips, but all it takes is one 'flyer' to gouge a cornea or worse.
As a machinist I like this kind of stuff even though its for that "other" material.
Lol!! Yeah, a little different 😁
@@CulverProps Did you build that copying lathe? I like it! As a motorcyclist machinist I often watch The Wheels Thru Time channel, a motorcycle museum in North Carolina. In it they have a home made cam shaft grinder that works very much the same as your machine.
It actually came with the company but my grandpa modified it
@@CulverProps So your in Rolla, Missouri! The next time I go to the antique motorcycle show in Davenport Iowa I'll stop in for a visit! At the same time there is The Old Thresher Reunion in Mt Pleasant (labor day weekend), there are lots of old tractors, trains and machinery but no airplanes. It would be a real pleasure of somebody could bring an home made Pietenpal plane!
-Stan
Maybe someone else already said this but anyone with long hair should put it up while around rotating machinery. People get seriously hurt having their hair pulled in.
It would bee nice to see the rest of the procedure to finish the prop.
Check out her other interesting videos where she shows different steps of the production from start to end.
I have a few more videos that should show you that 😁
very cool
She Knows!
Interesting copy machine. Ad minor comments/queries ..(1) you take great trouble to align the tip with the copy centre, but note not all props have the tips in line with the midpoint of the hub, some have a skew ! by eye the prop is angled up to the right because the hub is out of place, a reference at the same hight for the opposite tip would get the original prop level rather than the hub centred (which may nit be correct).. (2) there are large splits etc in the damaged original propeller that will be copied. It could have been good to "repair" it (to get as close to original shape only, obviously not for reuse) before making the new copy?
Well thing with UA-cam is that there is no way I perfectly describe everything I am doing. No, the center line of the prop does not have to be in the center of the tip of the prop. There are several prop patterns that have off set blades. The 1909 prop made for the Curtis Headless Pusher is made with 2” of cord on one side of the center line and 4” of cord on the other. But the 3 points do have align perfectly for the vertical balance to be correct. Like I said, i don’t go into incredible detail on these videos because they are not made for exact how to, more just to show people the rough idea of how they are made. Thankfully I have been making them from 20 years now and have a good reputation within the aviation community, so although I might not precisely convey every intricate thing I am doing on these videos, it isn’t because I am overlooking an aspect.
And the lathe does not transfer those voids onto the pattern. The pattern ended up a little thicker than the original and I will do a final shaping by hand. I can always take off extra material, and will in the final stages of the process.
Using same technique could a carbon or similar material be used, less rotating mass?