Just amazing to see the tools be so damn helpful, but what I or more importantly we are trying to find out is what size are the map lights, dome lights and the cargo light sizes are...
I'm haveing trouble when I put the led bulb in it turns on right away and I never turned on the lights and when I turn on the light it goes off any tips?
Are you referring to a PrecisionLED product? I have never heard of a problem like this before with our products. If so, please send us over a direct email at help@precisionled.com. If the product is not from us, I would think that installing Canbus LED products would solve the problem.
Thank you for your interest. Yes, we do have listed the installation shown in the video would be very similar, if not virtually identical to as shown in the video.
If you would take a few seconds to READ the description, you would then clearly understand if these will work with your vehicle. Woah, it isn't rocket science dummy!
When are you going to show us a before and after night time video,so we can see the difference? The fact that you don't,makes me wonder why you do all that work,but never show the results... Hmmmm. lol
The legality varies vastly from locale to locale and you will need to check with your local laws and regulations. What we commonly dissuade customers from, and what is illegal, are any colors above 6000K, as they are prohibited by the Department Of Transportation. Any color hues in your headlights are very distracting to other drivers which is why we only carry the 6000K color temperature for the headlamps, as they project the purest white. With proper installation in a projector housing, your aftermarket LED headlights will perform exactly like OEM LEDs.
For specifically this reason, we do not sell license plate LEDs in any extreme colors. We only sell them in the 6K and 8K colors, which are just different shades of white (warm vs cool).
I know why give the cops a reason to pull you over. It is part of the requirement to maintain outside display lights along with instrument panel lights.
You're irrelevantly commenting on an LED instructional tutorial for a vehicle you don't own. Folks like you aren't too bright. In fact, city boys call these " idiots " :'D
NOTE: much easier to install license plate lights if you open the back of the 4Runner and do it that way, instead of when it is closed!
Thanks for the input!
It would have been helpful if there was a small clip of the lights illuminating at night to see how far the led actually travels throughout the car
liltripleogken This man speaks the truth. Thats the only thing missing
Thank you for the feedback. We will keep this in mind for future video shoots!
I wish you would have shown the LED's on at night. I'd like to see them in action....
Thanks for the suggestion! We will keep that in mind for future videos!
How come you didn't do 5he headlamps and front side lamps?
Awesome vid guys! This is going to save me so much time!
We are glad to be of assistance!
Just ordered my kit for my 2012
Glad to hear it!
Where is the video explaining the difference between premium and standard led video?
Here you go! ua-cam.com/video/eES-rxFew00/v-deo.html
Just amazing to see the tools be so damn helpful, but what I or more importantly we are trying to find out is what size are the map lights, dome lights and the cargo light sizes are...
Hey, feel free to check out the link in the description box for more details on our kits!
Which license plate LED’s are these? Crystal white (6000k) or the Cool white (8000k) ?
Hi! These are the 6000k. Thanks for asking!
I have a '00 Toyota Tundra SR5 . Will this be the same technique used ?
+Leon Wellisch Yes!
I'm haveing trouble when I put the led bulb in it turns on right away and I never turned on the lights and when I turn on the light it goes off any tips?
Are you referring to a PrecisionLED product? I have never heard of a problem like this before with our products. If so, please send us over a direct email at help@precisionled.com. If the product is not from us, I would think that installing Canbus LED products would solve the problem.
Anything for headlights???
Yes, you can find the proper headlight kit here: www.precisionled.com/premium-h4-h-l-cree-led-headlights.html
Does this work on a 1999 4runner limited?
Thank you for your interest. Yes, we do have listed the installation shown in the video would be very similar, if not virtually identical to as shown in the video.
Is this not compatible with a 2001 4Runner?
Thank you for your interest. Yes, this would indeed be compatible with the 2001 4Runner as well.
If you would take a few seconds to READ the description, you would then clearly understand if these will work with your vehicle. Woah, it isn't rocket science dummy!
You should install them with dielectric grease so you maintain a good corrosion resistant connection
Thanks for the tip!
When are you going to show us a before and after night time video,so we can see the difference? The fact that you don't,makes me wonder why you do all that work,but never show the results... Hmmmm.
lol
+SONOFOVERBROOK #1 Sometimes we don't have access to the vehicle at night. We will keep this feedback in mind.
I installed some LED'S in my GS400 👍👌
Dudes. I bought all these bulbs from you. This is not what map lights look like in 96 4runner. Get on your email. Please and thank you.
We apologize for the confusion and hope we were able to resolve the situation quickly!
Are these legal?
The legality varies vastly from locale to locale and you will need to check with your local laws and regulations. What we commonly dissuade customers from, and what is illegal, are any colors above 6000K, as they are prohibited by the Department Of Transportation. Any color hues in your headlights are very distracting to other drivers which is why we only carry the 6000K color temperature for the headlamps, as they project the purest white.
With proper installation in a projector housing, your aftermarket LED headlights will perform exactly like OEM LEDs.
i'd do them all except the license plate lights, i'd just take those out and leave them out.
DreadlockDrummer I would do the same but I don't want to run the risk of being fined for not having ant
For specifically this reason, we do not sell license plate LEDs in any extreme colors. We only sell them in the 6K and 8K colors, which are just different shades of white (warm vs cool).
If you ride dirty, you will regret leaving them out!
I was pulled over and given a warning ticket a couple of years ago for my plate light being out.
I know why give the cops a reason to pull you over. It is part of the requirement to maintain outside display lights along with instrument panel lights.
City boys call these “ trucks “ 😂
You're irrelevantly commenting on an LED instructional tutorial for a vehicle you don't own. Folks like you aren't too bright. In fact, city boys call these " idiots " :'D
😂