Це відео не доступне.
Перепрошуємо.
Yaesu MH-31A8J (stock) & M100 SSB Mic Eq and Processor Examples of Stock Mic and M100 Mic-EQ & Proc
Вставка
- Опубліковано 19 сер 2024
- All this is a condenser mic not a ceramic I stated it incorrectly in the video, 73
Mic-Equalizer Only
119 PRMTRC EQ1 FREQ 500
120 PRMTRC EQ1 LEVEL 9
121 PRMTRC EQ1 BWTH 8
122 PRMTRC EQ2 FREQ 1000
123 PRMTRC EQ2 LEVEL 7
124 PRMTRC EQ2 BWTH 8
125 PRMTRC EQ3 FREQ 2000
126 PRMTRC EQ3 LEVEL 5
127 PRMTRC EQ3 BWTH 4
Mic-Eq Only + Parametric/Processor
128 P-PRMTRC EQ1 FREQ 100
129 P-PRMTRC EQ1 LEVEL 10
130 P-PRMTRC EQ1 BWTH 3
131 P-PRMTRC EQ2 FREQ 700
132 P-PRMTRC EQ2 -3
133 P-PRMTRC EQ2 BWTH 7
134 P-PRMTRC EQ3 FREQ 3200
135 P-PRMTRC EQ3 LEVEL 10
136 P-PRMTRC EQ3 BWTH 2
'73 de KI5JIF
Wow ! The difference on that hand mic blew me away. Sounds great. Thank you for doing that.
Not to nit pick, but it is a condenser mic setting, instead of ceramic. So the M100 has condenser and a dynamic mics. But I would like to thank you for taking time to do the comparisons b/t the different settings. Most just unbox, and “say look what I’ve purchased”!
Good morning sir, thanks I will update the description and read up the condenser mic, learning us good and I appreciate all the help have a good one and thanks for letting me know '73 sir
Great audio test showing how those adjustments affect the audio. Thank you very much for the information you are providing. 73 KD4FJ (South West Texas)
Good evening George, I'm so glad you enjoyed the video sir, I preparing a series o short videos on the HRD on how to configure menus '73 de KI5JUF , I should have a couple up tomorrow. thanks again appreciate your sir!!
Another great video! Thanks for your contributions to the hobby! 73s Terry KK6W
Nevermind I see you listed them , thanks . 73
Do a test with a 'modified' handheld microfon! Replace the 'original' microfon-capsule with an 0.20$ "electred-microfon capsule" and rework your test again!
Only a 10kilo-Ohm resistor for the supply-voltage and a 0.47micro-Farad capacitor als 'coppeling-capoacitor' ! The simple 'replacemant circuit' you can find on the internet. Don't forget to close all the hollow places, because the new 'element' is much smaller, I use do to this with some foam of a sponge! It sounds 'bad' with the 'holes' in the hand-mike.
Reduce your mike-gain down to ~20, because there will be much more 'omphhh' (AC-voltage/modulation) out of this capsule. Find a sweet regulation spot, with the EQ, and use the processor in a 'soft' way.
It was like 'day and night' or 'Coffee and tea', ... !
Unbelievable what the 0.20$ capsule will do for a FT-991, ... ! Works also very fine for FT-897/857/817 and other similar Yaesu-radios!
Allways reduce your mike-gain, because 'now' it ist to much, ... !
Used this kind of 'mike', since 20 years on my FT-817 (made in 2000) and the following radios!
73 de Markus ; db9pz
I am going to look into this for sure. Thanks.
That M-100 is not worth the money for such little difference. The hand microphone sounds more crisp and clearer. Heil microphones are the way to go. They are much cheaper and sound 100% better than the manufacturer M-100
*Fantastic profit margin.*
A microphone shouldn't have to cost ~40% the cost of an HF transceiver (FT-710).
I know that they can, but my point is actually the first sentence in this comment.
Great Video and good audio what EQ settings are you using
Good evening Nick, thanks very much for the message email me at shope02@yahoo.com and I'll send you my settings, appreciate the message and keep in touch '73 sir
Your wrong I'n your test..wen you have the eq on and you turn the prosser on the prosser turns the eq off..the radio won't run the eq and prosser together
Good catch - thanks
What settings do you normally use with each microphone? Thank you for a nice video. 73 de NØGFT
Good evening Carl, thanks for the message, email me at shope02@yahoo.com and I send you all my settings for HF '73 de KI5JUF
Neat video you opened by eyes to a couple of things i hadn't considered
Did you do the recordings with HRD ? or Another program ? (I've done all my settings using the Monitor Mode of the radio - which is not ideal)
Now I need to experiment (I have 4 different Mics)
2 Heil headsets (one that has just one ear piece) and newer one with 2 ear pieces), then A Mic on a Boom arm
then the Old Yaesu Mic I bought at a swapmeet. Already found I had to use different Mic gain settings for each.
Good evening sir, I actually us a CODEC driver that I installed in my laptop, I originally started with va2fsq SDR Software this video shows how I loaded driver and got the audio through my laptop ua-cam.com/video/skQ_GhAsTTI/v-deo.html , then when I loaded HRD this also worked, and I get all my audio through this driver. You will need to connect the laptop to the FT991 standard USB-A to USB-B will work fine. I use Screen-O-Matic and feed the radio Audio direct into the video recording software. Good luck let me know if you need anything else, this is another video I did too ua-cam.com/video/OwwVq0L4v4w/v-deo.html ‘73
Steve I have that M1 Reference mic can I run the Processer? Will that make it distort? I don't use the eq settings on my 991a since this mic already has them
Hi Brian, How you doing? What I would try is MIC-EQ off, PROC on, go to FM List and find METER, tap METER until you see COMP, then locate the MIC-GAIN, talk into the MIc and make sure the COMP needle movements are between 5 -10 db adjust the MIC GAIN as needed to keep the swings between 5-10db, my experience is as long as you are between 5-10 db on voice peaks you are not over driving. Give it try and let me know, also put on some headphones and locate the MON under the FM List tap it to ON and adjust the volume you will hear your self in the headphones '73