ARRMA LIMITLESS V2 BUILD/SETUP PART 2
Вставка
- Опубліковано 6 вер 2024
- My first build video, hope it helps some guys out .
Thanks to Arrma for sendind me one out for an early review
#arrmalimitlessv2 #arrmalimitlessbuild
#arrmalimitless #onyxrcpowersystems
Thank you James for imparting your knowledge for us guys on a limited budget to get the best out of our cars for speed running. Can't wait to see what you can do with the new V2.
Thanks for sharing your knowledge James. I am 73 years old and I would love to hit a 100mph before I turn up my toes. I am learning a lot from you.
these kind of videos are usefull indeed for those just getting into the hobby and for us long time runners to see how things are done differently between us speedrunners great job james 👍🏽
I’ve watch his video multiple times now and please can we get a VTE2 set up video pretty pretty please keep up the great work 👏🏻👏🏻
Ill do one
Great insights into how you set your cars up, really appreciate the extra time you've taken to share your knowledge with us.
I tried zooming in on the part number of the spacers but can't read it, any chance you can give me the part number please?
It is DuBro Nylon Flat Washer,#8
Part#: DUB637
@@vapnelement1286 thank you very much 👍
I love these videos! That’s so cool your a Body Shop guy too. I’m a paint and body lifer myself. I love the run videos too but these build and set up videos are my favorite that you’ve done.
Sharing set up tips and tricks 👍🏼
Everyone should appreciate videos like this!
This is just a suggestion… start a tv show… or podcast… I’d watch it….RCTV…!! Staring….”James McCoy…!!!!
Keep the videos coming James, very informative and easy to follow and watch, a lot of folk will find these videos extremely helpful 👌👏👏
Thank you for all the info, a lot of guys try to keep all that a big secret. I really appreciate it as I’m fairly new to the speed runs. Great video 👍🏻🍻
Another great vid. Don’t sweat the editing or polishing the video. Your insight and experience in the car setup is what we’re here for. Can’t thank you enough for sharing.
Loved this series, mine is in the mail and listening to those that do it the right way is very valuable. Thank you for this series. I saw the first run and it was pretty awesome. Looking forward to seeing the evolution of this V2 Limitless, keep em comin. Man that paintjob is sweeeeeeeeet. Yeesssssss more set up vids, again can't say it enough we need to hear from the experts. So many UA-camrs make it seem like they are taking speed run secrets to the grave and for what, lets all do 203MPH together lol.
Thank you James, I like these videos too. Simple and to the point, great job.
How about a video how you set up a delta plastic body. That wiuld so helpful. I have scrapped three now trying to get the fit correct.
Thank you for sharing Big respect James 🏁🏁🏁💪🏾💯💪🏾💯💯🏁🏁👍🏾
Thank you , thank you , thank you. Great 2 part video. Keep ‘em coming.
Please do a set up video for Foam tires pretty please with a cherry on top🙏🏼🙏🏼
Defo would like to hear more from you. You have alot of knowledge to share
The RC BIBLE PART 2!!!!! Bow your heads!!!!! THANK YOU!!!
Another great video James.👍🏻 thanks for helping out the rc community.
I appreciate you sharing your set up and ideas for us to endure 👍🏾
This all helps thanks jim
Great video James
Thanks James. I never knew about those shims great informational video 👍🏻👌🏼
wonderful beautiful tips thank you very much for sharing
Thank you for this Video !
Thanks for another informative video James. I always learn something new.
Thanks a lot for this video!
Good content brother.
Thank you brother
Dang I thought the stock spur gear it came with was 34? I’m still learning and building mine now but could of sworn I heard 34 somewhere. Thanks and nice video!
Stock spur gear on the v2 is 39 tooth
@@jamesmccoy204 ohh, dang. Is the v1 stock spur 34?
@@Animusborn yes v1 is a 34
👍🏻
Thank you
Great video and really appreciate all your insights as I do my first build. Where is a good place to find the Onyx batteries here in the US?
Awesome video
Do more of these this was awesome
Awesome sir speed!!! Love these types of vids....almost finished with my build..😎
nice paint job on the body shell.
Great info on the front shocks thanks
Keep the vids coming man, great content would definitely like to see more.
Awsome videos brother has helped myself and I'm sure will help alot of others 🚀😎
Love the build videos. Keep them coming!
Thanks for this second part too! If I may ask, what did you use to cut the front flaps? Dremel?
I just use body scissors
thank you sir! Beautiful initial build. Been kinda following its evolution
Great info James
thanks for the info james much appreciated. you said you like 1.13 to 1.14 pinion to spur ratio with that set up on the 2.8 diffs for 8s. what ratio would you run if you where on 6s with the v1 and the 3.3 diff ratio with exact same electics?
Sweet looking paint job! Awsome build series from the legend Himself!....do you laugh at the guys who need a runway....😂🤣just kidding lol
Great video! What receiver and transmitter did you use? I saw your 222mph speed test video and it went pretty far.
Futaba 4pls with a range extender and a r2006gs receiver
Great video sir! One question: Does the XLX2 sit low enough inside the ESC tray as to not rub the body?
It is very close , depending on what hight you run your body post
AWESOME Info & Very Helpful Video Jimmy!!! CHEERS from OIIIO Bro... \m/
You mentioned you use no droop screws in the front, but what about the rear do you use droop screws in the rear, or do you eliminate the droop screws in the back also? Thanks.
I dont use them in the rear either
Thank you bud great vid do you have a part number for the white bushings and brand
💪🏽🇬🇧👍🏽
When you mounted the esc, didnt it hit the body? Mine did...what was your fix?
It does hit the body slightly, no fix
hello I would like to rebuild the vehicle is there a complete parts list of the installed parts?
Great work man 🤙
Thanks u the best for this build I really appreciate it and thank you for all the help for The R/C speed car Community. This is a Big help. Especially from a pro. I have a 4070 TP motor 40mm 107 mm. Can I run max 6 with that TP motor??
Tp is a big amp motor , may be tough to get the most out of it with a max6.
How did you get the cover to fit with the motor wires up and over the chasis brace?
Fits fine
Awesome build, very nice 😎 👍
Thanks for all the build tips! Can't wait to see her in action!!
Quick question, what do you use to trim the rear wing & front conards? I'm about to trim mine on the new body I just painted. Last time I used an xacto knife but it was a bit of a pain lol.
I just use lexan body scissors
Great information again! The esc wire length you mentioned brought up a question. If you have batteries running in parallel and on of the batteries has slightly shorter wires (due to a connector repair) could this cause issues when pulling high amperage during a run? Do lipo wire lengths need to be identical if running parallel?
As long as they are close its fine
Curious how your droop screws and ride height on your vte2 is set im kinda struggling with mine thanks
Ill be posting part 2 of the Perfect Pass build this week , check it out , i set up my Hobao vte2 the same way
Good stuff James. I have the same setup except I’m running XLX only because fears off TP XLX fires. What are you setting up on your XLX2 to prevent fire or over heating. Love to see video
Ive never had a problem running Xlx2s, i have over 40 of them
Is 4060 TP motor bigger than the 4070?
Thanks awesome
What specific foam tire did you run on this? Thanks!!👍
BSR purple
Hi James, ive been paying close attention to pretty much everything. I have one question about the droop.
If u find that one front wheel is lifting before the other, Do u go back in and add more bushing to one side or do u then use the droop screw?
I try to not use the front droop screws ever but for some very fine adjustment its fine
Also do you shim your stub axles and anything else that has more play than it should?
You can , really depends on how much play
How do u turn it off & on. If u take the switch off?
Plug the batteries in and unplugging them.
Batteries should not be left plugged in when not using the model
I got a 4060 TP motor I was going to fit on my infraction looks to big to fit in stock location
4060 wont fit in an Infraction in the stock location with modifications to the motor mount and the steering
@@jamesmccoy204 I didn't think it would..but the 4070 will fit in stock location?
@jamiewellman6986 only on the v2 limitless and the 4070 will also
6986? I haven't heard of that motor I'll check it out and yes I got the V2 I started to order the 4070 but they said it wouldn't fit in the stock location..the seller said the 4060 would..so now I'm like what now..lol .buy the 4070 or switch everything around and run the 4060🤔 I think the 4070 would be faster..or at least that's what I've heard..
@@jamesmccoy204 oww are you saying this will only fit the stock location of thev2 limitless..not the stock location of V2 infraction?
Hello
I'm about to build a v2 limitless with a 2028 motor, what motor mount do you recommend?
I believe Arrma is offering an optional slide for the stock mount that will hold the 2028, My go to mounts are PPS and Scorched RC both are fantastic
I'll look in the arrma one if no I'll go for the pps mount
Thanks
On the tp. Which ones A. Or does it matter??
Doesn't matter , ABC is only for sensored motors
What number nylon washers/bushings r those
Du-bro 8-32 , #637
@@jamesmccoy204 thanks. And that fuel line. Any kind or is there a certain size or type
@@tropicthunderbolt I you the yellow, size large
@@jamesmccoy204 thanks
where are u located man
In the upstate of South Carolina
Castle said no way on that gear
Not sure what Castle has to do with it but 34p 39s is the best gearing for this setup.