I am a full time truck driver by day and a part time mechanic by night. I watch these instructional videos just for fun and you are literally the only person on youtube i have seen do this correctly. I scream at the screen when i see people pour 50/50 blended antifreeze into a system that has just been flushed with water. Im glad you explained that you have to add full strength antifreeze equal to half the systems capacity and THEN top off with distilled water. Everything you explained really hit the nail on the head. Keep at it man. Great video!
If you were to run only water you would have several issues. First, the boiling point of water is 212 degrees F, just 2 degrees above the normal operating temperature of a Jeep 4.0. That means you'd most likely boil over if you used plain water (50/50 coolant has a boiling point of about 265 degrees F). And yes, another reason to run coolant/antifreeze is that when mixed properly, you will have a decreased risk of rusting any ferrous parts inside your engine (like the engine itself in the case of the Jeep 4.0). Rust is the reason that his coolant came out all brown and murky, it would have been much worse if he didn't have any coolant in the system at all! 2 gallons of undiluted antifreeze costs about $15 and it should last you several years.
micvee not true...water doesn't boil at 212 when pressurized as is the case of a typical cooling system... And actually water dissipates heat faster than coolant. So it works better by itself. But overall you are right.. You should run a 50/50 coolant mixture for reasons of freezing and very mild rust prevention.
Good video. One thing I did additionally on my 99 XJ was back flush the heater core since my heat was lukewarm even after a thermostat change. Boy did I get some great heat after that . There is a very simple video on doing that.....simply disconnect both heater hoses and run water hose through bottom heater core hose till all the junk comes out. Refill the whole system, let air burp out of cap with engine running and cap off. Fill your expansion tank to full line. Put rad cap back on after coolant wants to run out constantly. Took mine for a short drive, turn off, check level, add if necessary to expansion tank.......keep in min that the expansion tank level may go down as the engine cools so check your level after it cools and for good measure check your level for the next couple days and recheck for any hoses that may be leaking at the clamp area from being disturbed. Not a bad idea to replace all heater and radiator hoses at this time. One other trick I do while I'm in jeep maintenance mode that I do to every cherokee I own....yes I own a few, is replace all the battery positive and negative cables with an assortment Imget from the auto,parts store. I also run a new cable from battery negative post to one of the air compressor bracket bolts to give the engine a better ground strap than the deteriorated woven strap from the factory at the back of the engine near valve cover. One of my jeeps was burning out ignition could due to a weak ground and this fix cured that and also made the engine start up noticeably faster and the engine just feels much stronger after this simple and rewarding preventative fix. Happy jeeping!
Man, that was a great video. Well explained but simple for the layman. You guys that do these videos honestly are helping a lot of people in the world. Even if it might seem like a simple thing to do for some. Much thanks!
This is definitely the most comprehensive flush tutorial I have found. I can't thank you enough for expressing how important it is to catch the old toxic coolant. The only other tip I might add would be to back flush the heater core with VERY light pressure from the hose, Especially on an XJ that could have a load of sludge and crap trapped in it.
Then he used the garden house to pour water so the antifreeze was diluted. The animals wont die drinking it but will probably get cancer. Anyhow, it was a very instructive video. Will try it myself. Thanks.
Just got one of these Jeeps for 1k and I found this video. Watched a few more of this guys videos and now I know..... I HAVE TO SUBSCRIBE! Thank you so very much for the videos they are a great guide to getting me in the right direction for my new toy.
I went to a mechanic shop and they told me they needed to flush my system out. They made it seem like it was a big deal and charged me 125 dollars to do it. Just finished watching this video and I'm incredibly pissed that I paid those fu#@ers that much money to do it!!!!!!!! Thank you for making this video. Now I can do this $#!% on my own.
Jesse Riley well you got to remember time is money. It may not be that hard to do but probably took at least 1 hour. If the shop rate is like $95 and hour then you have to ad that to materials. It already cost a lot more to get someone else to do it.
Excellent video, as always. I can't believe shops charge so much to do something simple. My dilemma is that I live in the city and do not have access to a hose. I can ask a friend, but I do not want to make a mess in his driveway. Maybe a DIY car wash place will let me get away with it..or ill just bite the bullet at a shop.
Best instructional video I've seen for quick Jeep maintenance. Easy to follow step by step and straight to the point of what to do and how to do it. Thank you!
Question for all you good folks out there. When I pulled the top radiator hose off to start the engine flush, no water would go in past the thermostat. I had to pull my thermostat out before I could get water through. Is that normal or was this a case of a bad thermostat? The Cherokee overheated recently that’s the reason I got off my rear and decided to do my own flush. Living in Costa Rica, not only do I have language issues but have been warned repeatedly that the local mechanics shouldn’t be trusted. Thanks! And great video!!!
Bad thermostat snd do not put green coolant in a chrysler/gm vehicle it takes the orange/yelllow/red (OAT) Organic Acid Technology coolant/antifreeze or you will corrode the cooling system and all its parts with the green (IAT) Inorganic Additive Technology coolant/antifreeze
Neither way is. On my Jeep my issue right now is nasty sludgy rusty antifreeze that needs flushed out. I put down cardboard, and was really careful....and I still ended up with rusty spots on the concrete, haha.
You can catch it all and keep the rust off your driveway if your lifted by using a little wading pool. I don't know why everybody feels the need to criticize the boy for getting a little fluid on the ground
thank you admiral. my 2000 jeep actually started doing this on me and I cant drive it. I figure it could be clogged so that is what I am going do tomorrow before work.
I just took off all the Cooling system components on my engine and replacing everything. Can I just now or should I wait until I get all the new stuff back on? Thanks again as always Admiral -Fletch
Thanks for the video, I plan to use this to help me change my 99 XJ soon. What I can't understand is we need to use distilled water and yet you use city water to flush it out. Surely some city water is still in the system and could cause long term damage?
That reservoir doesnt have a outlet of any kind near the bottom so if you fill it with water like a giant DONG SLOBBERER! Just skip the 8mm part and go strait to COCK POUNDING your own FACE!!!!
These 2 screws are difficult to unbolt. Another solution is to disconnect the small hose from the canister but not on the canister side but on the radiator side. Let this hose hang on a lower position than the canister and the gravity will empty the canister. You can do an extra flush with the garden hose from the top op the canister.
I took the thermostat out of my 95' today. It came out quite easily. Getting it back in with that lower bolt not clearing the serpentine belt- stupidity on Chrysler's part:-(. So now my 10 minute repair is going to take me half the morning tomorrow to put it back in- grrrrrr! This video was of great help, that petcock doesn't do anything to drain off the cooling system, you gotta pull the hoses! My other "DOH!" for the morning was having my bucket in the wrong place- my neighbor walked up to say good morning and have a chat for a few minutes, and I wasn't paying attention to where the water/antifreeze was falling. We got it cleaned up. TOmorrow I am flushing my heater core- always make sure you do that when you flush your system!
glad the video was helpful! That seems to be the way it goes sometimes. A 10 minute job turns into a much larger job because of one stupid bolt or part in the way
Now I have a cutoff tool just in case...haha. I have a feeling when I go to put in my lift next year it will come in handy..along with my reciprocating saw and my breaker bar/pipe setup. I might spring for a 30 gallon air tank and an impact gun before then, haha.
@@iriehiphopgirl This guy had a defective thermostat, allowing the water to flow into the block. Another good way is to spray water through the heater hose that connects into the water pump. This is the bypass hose that bypasses the t-stat.
@@ethanwalton980 thank you so much for the advice! I ended up flushing out the system section by section, starting at the heater core. I inherited my 92 Jeep XJ and my mom hadn’t flushed the cooling system in over 5 years…. It was a doozy. She’s running good now though!
Hey Admiral great video i just replaced my fan clutch radiator and water pump and serpentine belt on my 92 cherokee after doing all this i looked in my original owners manual and iv never seen or heard of this but there is a engine block plug under the manifold for the coolant flush it said to leave the radiator cap on and remove the engine drain plug and drain cock and supposably it will drain everything the over flow and block everything do you know if this is not recommended ? Also i know you live in AZ where its all ways hot what temp does your cherokee run at ? I had mine jump to 230 while 4wheeling on the beach and i read that it is NOT uncommon for it to go that high but normal operating temp is 195 and thats why i changed everything now it goes as high as 195 but at night when its cool it doesn't go over 190 which im happy with but i worry when im on the beach again that it will shoot up again under the heavy strain does yours ever go up to 230 when 4 wheeling ? Thanks Admiral
I just want to know how you managed to get water to flow through the thermostat housing. If the thermostat is in place and functioning properly, running water into the top radiator hose should simply fill up the hose.
When I spray water into the upper radiator hose water does not come out of the lower hose, it just builds up in the upper hose. Why doesn't mine behave the way yours is? 98 XJ 4.0.
Great guide. Just bought a 93 xj with overheating issues and just replaced the thermostat, water pump and fan clutch. Up next is a coolant flush for piece of mind. Hope that helps my problem. Is there anything I might be missing?
sounds like you've got the basics covered. If you continue to have overhearing issues you can get into fan upgrades and hood vents but i would do all of the things that you mentioned first because the other two won't do much if your cooling system isn't in good shape.
Great video. I'm wondering why my jeep is overheating. I also noticed the coolant isn't draining from the reservoir. It seems like its not going through the system. What could be causing this???
Ok good sir, your channel is definitely the best out there for such things. So, I followed your steps like the Bible and everything worked great except the upper radiator hose flushing. I put my garden house in there and it just filled up with water and never came out the lower radiator hose (which of course was detached). I kept filling it up, and you could hear it filling up, but the water never would come out except for when I turned that upper radiator hose upside down. When I plugged everything back up and filled with anti-freeze I could only get about 1 gallon of anti-freeze in there. What do you think is the problem? Everything else went well, no overheating.
your thermostat is probably blocking the water. I have a video on how to replace the thermostat, but if you remove the thermostat and reattach the housing, the water should flow through fine.
1999 Jeep cherokee sport 4.2 6 cyl. Great video, easy to do. I also changed the coolant sensor as well because my gage stopped working, it's working great now, temp is reading a constant 210 when vehicle is warm. The issue now, is I lost all my cabin heat! The heater was working great when I ran the coolant cleaner through it, and after the coolant change for the first day. But today the heater does not blow hot air anymore, just cool. The blower is working fine. Any clue why? Thanks for your help!
Any cylinder head cracks yet? Mine just cracked between cylinders 3 and 4 which is the typical spot. If you crack since this is a design flaw on the 0331 head for 2000 and 2001 get a TUPY head or one from Alabama Cylinder Head with a very improved casting.
Help I’m a 63-year-old female and I’ve done everything you said but I can’t get the water to flush through the engine from the top radiator hose. I called my mechanic and he says it’s because my engine is cold in the thermostat has it shut off. Not sure what to do. When I went to refill the car I could only get in 1 gallon of antifreeze in about a half gallon of distilled water. I feel like there’s something going on between the top radiator hose inside the engine block because the check engine light keeps coming on, but I don’t know how to get the Flush completely done.
Very informative. Currently working on fixing an overheating issue I have on my 2003 Jeep Grand Cherokee since moving down to the Phoenix area. May have to end up doing this. Didn't even think about adding coolant first. Quick question though, how much water did you use for flushing the radiator? I live in an apartment complex, and don't have the luxury of using a garden hose. I might just pour water in from the kitchen sink if it isn't too much.
Thank you very much for your video. It gives us newbies a chance to get around to actually do some work on our cars on our own. =) Great, helpful attitude. God Bless you.
I had that happen to me once. I ended up disconnecting them for a few hours and when I connected them again they were fine. I think the connection can get loose at the horn itself and make the horn activate on its own
Not sure if you fixed problem, but there is a fuse that if removed, will turn off horn. Also if your check engine light is on, get codes read. If it says clock spring,that is your problem. Bad clockspring sends high voltage to the TPS causing rough idle and also makes your horn go off nonstop
Hey! I was going through your video step by step, and I noticed when I turned my jeep on to let the flush go through the system that it started to creak here and there when I turned on the heat, is that normal?
Should mention that the thermostat being closed won't allow for a full flush of the engine block and removing it is not advised if you dont have to. Bottom bolt is a pita and the design of the housing is common to leak. Dont mess with it unless of course the stat is bad and needs replaced.
when i’ve done mine i would run engine with heat on to get that dirty stuff out, but nowadays at over 60 years old i look for shop that has the flush system that pulls old stuff out and new stuff in its fast and no mess, of course it costs more be worth it
Best thing to use when draining the system is a cement mixing tub there low and rectangular they catch it all. You can get them from a home improvement store. Because the fluid spills everywhere otherwise. You never really get it all in the bucket.
Rick C137 You never really did get it all in the bucket,, Another trick is laying out a tarp under the vehicle and and surround it it with any absorbent.. It catches all that doesn’t go into the bucket, soaks it up, and can be swept/scooped up pretty easily. I do the same thing for oil changes to protect the ground or garage floor. Thx Rick
My coolant looks clean and full but still going to clean the system, but I have one question: my coolant reservoir seems to drain very quickly so I sometimes run with no coolant in the reservoir, but the engine doesn't overheat. Do you know why this would be?
Great video man I blew my top radiator mudding and got a professional flush and it didn't solve my over heating problem so I may think it's my water pump but first I'm doing exactly what you just did!?
Great videos I am doing this twice a year before summer and then again before winter. Only step that Is recommended is to blow the hose water out with air from a compressor. I actually used a small portable desalt leaf blower. Probably not a big deal but the theory is the minerals in the water from your hose will cause issues.
You apparently failed to mention that you MUST have previously removed the THERMOSTAT! Otherwise water would NOT flow from the TOP radiator hose into the engine compartment to flush it out. The thermostat is a spring coil heat activated valve that opens up when maximum temperature indicated on the thermostat is reached to ALLOW hot coolant to pass thru and circulate into the cooling system for heat dissipation and to maintain a consistent operating temperature.
Would running water straight to heater core hoses with the heat switch turned to high and the jeep off be a better way to flush heater core or is running water through the lower radiator hose like you did doing the same thing?
Nice video! I have a question,amm ,i did evertying like you did ,but when i remove the second radiator hoes or how you call them ,i cant pour water in there ,becaus it doesnt go throught all the way to my bucket ,or i did something wrong? Have xj 1995.
I picked up an 89 XJ and the thermostat-heater core and water pump-heater core hoses were taken off. They also have the “T” inline for the pressure tank. My goal is to install the coolant filter but not sure where the four ends are supposed to be in accordance with the filter housing. You have any pointers?
Question if when I try to out water on the upper hose by the battery of water returns back does that mean my thermostat is open and doesn’t let water thru?
One thing I would do is check the antifreeze with a hydrometer after it's been driven for a little to see how close the mixture is to 50/50. Should be seeing around -34*F.
Thanks man your videos are super helpful. I just got a 2001 Cherokee with 180k. Im trying to figure out everything i should/can do to clean it up and make it run good and last long. If have any advice on where to buy replacement parts for a good price i would appreciate it.
Admiral Off-Road I had a leak in my break line on the driver side so I replaced it, and bleed out the breaks. There's pressure when is turned off but when I turn it on it goes away and break light goes on. Could it be bad master cylinder?
Admiral Off-Road lol I watched the video again and didn't see that part where you left the motor running. Now it works great. Would you possibly do a video on how to restore a rear axle and make it like new?
Which axle do you have? I have done a video on tearing down a Dana 35 rear and a Dana 30 front axle. I currently have a Chrysler 8.25 rear axle if you have any specific questions, I could probably help you out but the axles I have now are in pretty good shape, so a rebuild is probably pretty far down the road
I know it’s bad to use tap water when you fill the system to run. But is it worth it to fill it with distilled water when you flush it too? Or is this overkill
thanks man helped me immensely. You in CA? I got a 01 Cherokee and it has some problems, I've been able to diagnose and fix some but there's others I have no idea where to start!
okay so i recently flushed, now it is overheating and smoking near where the upper radiator hose connects to the radiator. I am replacing the hose this weekend but it seems like very small leaks could be coming from the radiator wall where it connects? not entirely sure, wondering if you had any ideas.
hey man, good clear video, I flushed my 2000 4.0 like you did however I used distilled water for the whole process, a bit more expensive but worth it for the piece of mind of have pure h2o and coolant in the pipes, then put a 50/50 mix of Zerex ZXGO51 G-05 Antifreeze after reading some reviews about the chemistry, I also replaced my 195f thermostat with a 185f thermostat because I'm usually in a very hot climate, so thanks for letting me watch it be done first before I attempted myself... I'm interested in if you know anything about that little bit of noise coming from your rig, it's almost like a very soft lifter tick, I have the exact same noise in mine and it started after putting synthetic oil in just one time! I know it's not threatening to the life of the engine but it still bugs me, any ideas?
It's probably a bad idea to run a lower temperature thermostat. Your engine is supposed to run at 210 degrees F. If it runs hotter than that in any climate something is wrong.
kevin tyree, how much water were you able to put into the upper hose before it started coming back out the top? Sorry im not able to reply to your comment directly. Not sure why UA-cam is not letting me.
I'm having the same problem. Tried running water through the top hose and it just filled up and didn't drain from the bottom. It only took a few seconds for it to fill up. Possible clog in the system? I'm doing this flush because my 93 grand cherokee keeps overheating at idle.
bobhuth Hey man, make sure your fans are spinning and the fan shroud are not damaged. You know you radiator is likely working as it's cooling while your driving. IE there's enough coolant going through it to be cooled by airflow.
waiting to long with the cleaning, or not using destill. water, or based on a defect, the thermostat is always in the close position, img0.uploadhouse.com/fileuploads/22565/22565840cdc01ca6d33cb5e55901d880971cc01e.jpg that caused the overheating problem, cause the cooling system hasn`t a proper circulation.
Quick question, how did the water get passed the thermostat when putting it directly into the top of the engine? Wouldn’t that mean your thermostat is stuck open? Cause mine doesn’t let anything flow in from the top and I just did a thermostat and water pump.
Watch the beginning. He warmed the motor, then shut it off. He then disconnected the hose just after it cooled enough so the system was no longer under pressure. The heat from the block keeps the thermostat open, so water can flow through the block.
Undoing the plug from the bottom and disconnecting the small hose from the side of the cap then put the tip of the hose under the car and suck through it a little bit then gravity will do the rest and you rinse and drain your reservoir.
Great video! Got a little problem though; when I went to flush the upper radiator hose/engine it's not flowing freely. I turn the garden hose onto not even half power and it's still spewing back out the upper hose. Off the top of my head I'm thinking blocked passages, but my radiator went just fine and usually from my experience the radiator clogged first. any clue? btw this is my first jeep. 1992 jeep Cherokee laredo
I have either a 190 or 195 thermostat (can't remember) and that works fine even in the summer in Arizona. I have a thermostat replacement video if you need to reference it but the process is pretty straightforward.
Hey, do you have any videos of replacing the Thermal Expansion Valve? Or ability to walk me through that? Haha.. I cannot find ANY info online for that!
When you used the hose it wasnt distilled water right? Does completely flushing it after make it ok to use hose water? or should I flushed with distilled as well
also, you added everything directly through the radiator..should I fill up my coolant reservoir with 50-50 (assuming it hasnt after running to operating temp)
Hi Mark. That's correct. The hose was just normal water which is why I emptied the system again after running the hose through it. If you have enough distilled water, then you could run that through the system as a final flush as well since it is impossible to completely drain the system. To answer your other question, yes you should also fill your overflow reservoir to the proper level.
THANK YOU. I must have looked at 5 other videos, and none of those morons even showed how to find the drain valve, let alone how to work around the ridiculous set up by Chrysler. Best Video for this job!
Nice video. Been wondering how I can flush out the cooling system; the day I got my 97 Cherokee. Now, I was wondering if you could type out all the things I need to get or need when I am doing this? I don't know why but I can't hear the sound from your video. It could be my speakers or just "UA-cam" but anyway. Thanks for your great work on the video. Hope to watch another video that could help Jeep Owners like us "including you". How to maintain our Jeep. :D
BCJeepCherokee you'll need a hose, a bucket to catch the drained coolant, a few gallons of distilled water, full strength antifreeze (not 50/50 premixed), radiator flush (optional) and a screwdriver to undo the hose clamps. you will undo the lower radiator hose to drain the old stuff out, then undo the upper radiator hose and run water through the system using the hose until it runs clear. next, re-attach the hoses and fill the radiator with just water and the chemical flush. run the vehicle until it warms up completely and turn the heater on for a few minutes. drain the system again once it cools down and run the hose through it again. next you will fill the system again. put the full strength coolant in first. this is to get a 50/50 mixture. its impossible to completely drain the system so there will still be water in there. find out what your cooling system capacity is and put half of that amount worth of the coolant in. next fill the rest with the distilled water. let it run for a while and try to get all of the air out of the system. keep an eye on the coolant level for a few days. you'll probably have to add a little bit as the fluid level will appear lower when you get all of the air out of the system. hope this helped and good luck!
Thanks for the reply I ges I will take it somewhere it might be more then just the oil pan gasket anyway thanks and keep the videos coming your one of the few guys on UA-cam that knows what your doing Thanks Chase NY long island _lh3.googleusercontent.com/q6DkK8fNoHBxx8ir2EbTtvQtC-tYTelEGHFXfokbWVN2azsXNmYo0_ep2Djp6go0sbz7uqEP1Q_
Probably has a bad thermostat because it was cold enough to change and not bubble over which means either he has a bad thermostat or he is running a really low spec thermostat; OE is 195°F
Enrique Gonzalez The older XJs cooling system is a little different than the later ones (closed vs open system) but from what i've read it should be about 2-2.5 gallons (about 10qts)
any thought? so i tried doing this and when i got to the top hose. i tried putting water trough it but it just filled up. like the water was getting stuck somewhere. the water never went trough and came out the bottom radiator hose. 2000 xj sport 4.o
@@doubledmetaldetecting9582 the thermostat is closed. If I've read correctly; push water through the small hose that goes to the thermostat it's open constant.
he failed to mention he pulled the thermostat out obviously so the video is incorrect and would fail to flush anything from top rad hose! And my cat is dead from that coolant he left in street! no thermostat= no cooling , no flush =no fix
![Jeep Cherokee: Water Pump Replacement & Cooling System Flush ['97-'01 XJ]](/img/n.gif)
I am a full time truck driver by day and a part time mechanic by night. I watch these instructional videos just for fun and you are literally the only person on youtube i have seen do this correctly. I scream at the screen when i see people pour 50/50 blended antifreeze into a system that has just been flushed with water. Im glad you explained that you have to add full strength antifreeze equal to half the systems capacity and THEN top off with distilled water. Everything you explained really hit the nail on the head. Keep at it man. Great video!
Thanks!
it all depends on where you live as well here is south Texas i can run just water and be fine. But i add the 50/50 because its easier.
If you were to run only water you would have several issues. First, the boiling point of water is 212 degrees F, just 2 degrees above the normal operating temperature of a Jeep 4.0. That means you'd most likely boil over if you used plain water (50/50 coolant has a boiling point of about 265 degrees F). And yes, another reason to run coolant/antifreeze is that when mixed properly, you will have a decreased risk of rusting any ferrous parts inside your engine (like the engine itself in the case of the Jeep 4.0). Rust is the reason that his coolant came out all brown and murky, it would have been much worse if he didn't have any coolant in the system at all! 2 gallons of undiluted antifreeze costs about $15 and it should last you several years.
micvee not true...water doesn't boil at 212 when pressurized as is the case of a typical cooling system... And actually water dissipates heat faster than coolant. So it works better by itself. But overall you are right.. You should run a 50/50 coolant mixture for reasons of freezing and very mild rust prevention.
Agreed this helped me a lot and details always make for a proper instructional video
Good video.
One thing I did additionally on my 99 XJ was back flush the heater core since my heat was lukewarm even after a thermostat change.
Boy did I get some great heat after that .
There is a very simple video on doing that.....simply disconnect both heater hoses and run water hose through bottom heater core hose till all the junk comes out.
Refill the whole system, let air burp out of cap with engine running and cap off.
Fill your expansion tank to full line.
Put rad cap back on after coolant wants to run out constantly.
Took mine for a short drive, turn off, check level, add if necessary to expansion tank.......keep in min that the expansion tank level may go down as the engine cools so check your level after it cools and for good measure check your level for the next couple days and recheck for any hoses that may be leaking at the clamp area from being disturbed.
Not a bad idea to replace all heater and radiator hoses at this time.
One other trick I do while I'm in jeep maintenance mode that I do to every cherokee I own....yes I own a few, is replace all the battery positive and negative cables with an assortment Imget from the auto,parts store.
I also run a new cable from battery negative post to one of the air compressor bracket bolts to give the engine a better ground strap than the deteriorated woven strap from the factory at the back of the engine near valve cover.
One of my jeeps was burning out ignition could due to a weak ground and this fix cured that and also made the engine start up noticeably faster and the engine just feels much stronger after this simple and rewarding preventative fix.
Happy jeeping!
Ignition coils....my bad.
You back flushed your ignition coil?
My heat is really weak. I have a 01 jeep grand cherokee. About to replace the thermostat. Any ideas if that doesn't work?
@@johnc5872 backflush heatercore
Man, that was a great video. Well explained but simple for the layman.
You guys that do these videos honestly are helping a lot of people in the world. Even if it might seem like a simple thing to do for some.
Much thanks!
This is definitely the most comprehensive flush tutorial I have found. I can't thank you enough for expressing how important it is to catch the old toxic coolant. The only other tip I might add would be to back flush the heater core with VERY light pressure from the hose, Especially on an XJ that could have a load of sludge and crap trapped in it.
Brother, you just saved me 150.00 BUCKS.... SPOT ON. 1991 Jeep Cherokee Laredo 4x4 4 door.
Glad to help!
I'm updating mom's '91 (Limited Ed.) after it sat over 6 years, ugh.
Great tips. Thanks for the video. I'm getting ready to flush my 98 Cherokee out for the first time on my own and needed that advice.
Thank you . I think your attitude and explanation were great . Not at all patronising or cynical just clear and easy.
Thanks!
"Don't spill it cause it kills animals" *Spills all over the place* LOL
ya that didn't work out as planned. Just had to clean up afterwards
Just thought that was ironic funny, I figured you took care of it. lol
Do you fill up the reservoir tank aswell after filling at the radiator gap?
Then he used the garden house to pour water so the antifreeze was diluted. The animals wont die drinking it but will probably get cancer. Anyhow, it was a very instructive video. Will try it myself. Thanks.
At least he tried... Most people will just let it go everywhere
Just got one of these Jeeps for 1k and I found this video. Watched a few more of this guys videos and now I know..... I HAVE TO SUBSCRIBE!
Thank you so very much for the videos they are a great guide to getting me in the right direction for my new toy.
Thanks!
I went to a mechanic shop and they told me they needed to flush my system out. They made it seem like it was a big deal and charged me 125 dollars to do it. Just finished watching this video and I'm incredibly pissed that I paid those fu#@ers that much money to do it!!!!!!!! Thank you for making this video. Now I can do this $#!% on my own.
sorry to hear that! glad to help
Jesse Riley well you got to remember time is money. It may not be that hard to do but probably took at least 1 hour. If the shop rate is like $95 and hour then you have to ad that to materials. It already cost a lot more to get someone else to do it.
ngl coolant is something i stay away from. i’m not sure if i’d do this to mine
Nicely done.
It's a lot easier of a job than a lot of people think.
Another option for a chemical flush is C.L.R. .....works like a champ!
Josh B That's a good idea. I'll have to remember that!
I was wondering if CLR would be good to use. Glad to know someone has already tested int and it works.
Excellent video, as always. I can't believe shops charge so much to do something simple. My dilemma is that I live in the city and do not have access to a hose. I can ask a friend, but I do not want to make a mess in his driveway. Maybe a DIY car wash place will let me get away with it..or ill just bite the bullet at a shop.
Great video, detail and clear description. Thanks for posting buddy!
pitot1988 thank you very much!
Best instructional video I've seen for quick Jeep maintenance. Easy to follow step by step and straight to the point of what to do and how to do it. Thank you!
Good job I like to see young guys fixing and repairing own stuff!!!
My man, super helpful. Simple and to the point just how I like my youtube tutorials. Just picked up a 97XJ and I'm going through all my fluids/oils.
Thanks, mine is a 2000, saw your video on radiator replacement, led me here now subscribed.
Hey, thanks for the info. I was getting ready to go in blind but im glad i found your video.
Great video! Question though. How does the water flush through the engine via the top hose with the thermostat closed/cold?
Great instructional video! I'm trying to get an old Jeep running that's been sitting for a long time and you've been a huge help.
Thanks! Glad to hear it!
Huge help! Just got a '93 and this was big help.
glad to hear it!
Great video by the way ,really gave me a clear idea of the correct way to do it.
Question for all you good folks out there. When I pulled the top radiator hose off to start the engine flush, no water would go in past the thermostat. I had to pull my thermostat out before I could get water through. Is that normal or was this a case of a bad thermostat? The Cherokee overheated recently that’s the reason I got off my rear and decided to do my own flush. Living in Costa Rica, not only do I have language issues but have been warned repeatedly that the local mechanics shouldn’t be trusted. Thanks! And great video!!!
Bad thermostat snd do not put green coolant in a chrysler/gm vehicle it takes the orange/yelllow/red (OAT) Organic Acid Technology coolant/antifreeze or you will corrode the cooling system and all its parts with the green (IAT) Inorganic Additive Technology coolant/antifreeze
hahah "I don't want to leak out any onto the street"
*proceeds to monsoon everywhere onto the street*
good video though very informative. thanks bud
It's too bad it doesn't drain as nice and neat as say...an oil change, haha.
If you are able to drain the radiator through the drain valve instead of the lower hose, it is less messy but still not neat by any means
Neither way is. On my Jeep my issue right now is nasty sludgy rusty antifreeze that needs flushed out. I put down cardboard, and was really careful....and I still ended up with rusty spots on the concrete, haha.
You can catch it all and keep the rust off your driveway if your lifted by using a little wading pool. I don't know why everybody feels the need to criticize the boy for getting a little fluid on the ground
The only recommendation would be to show the results of doing the engine flush? Always fun to see that ! Great video!
thank you admiral. my 2000 jeep actually started doing this on me and I cant drive it. I figure it could be clogged so that is what I am going do tomorrow before work.
What was wrong with your Jeep? I have a 2000 Jeep Cherokee too. But mines keep over heating. I don’t have any coolant in the coolant reservoir tank.
I just took off all the Cooling system components on my engine and replacing everything. Can I just now or should I wait until I get all the new stuff back on? Thanks again as always Admiral -Fletch
Thank you very much for this video. My 95 Cherokee SE will do very well in the Miami heat today.
+Grover Mitchell You're welcome!
tks for the video. gonna go out & try this now for first time ever...
Me too. How'd it work out for you?
Thanks for the video, I plan to use this to help me change my 99 XJ soon. What I can't understand is we need to use distilled water and yet you use city water to flush it out. Surely some city water is still in the system and could cause long term damage?
About to flush my xj this weekend and would like to know the answer for this also.
Nice truthful content and smooth modern editing. Good job kid.
Thank you Now I can flush my wife’s radiator system my self without paying a shop an arm and a leg to do it. I did give you a thumbs up on the video.
Thanks!
That reservoir is held in with two 8mm screws. Takes 2 minutes to dump out and reinstall.
That reservoir doesnt have a outlet of any kind near the bottom so if you fill it with water like a giant DONG SLOBBERER! Just skip the 8mm part and go strait to COCK POUNDING your own FACE!!!!
@@cdwalkman8401 lol bro wtf
These 2 screws are difficult to unbolt. Another solution is to disconnect the small hose from the canister but not on the canister side but on the radiator side. Let this hose hang on a lower position than the canister and the gravity will empty the canister. You can do an extra flush with the garden hose from the top op the canister.
I took the thermostat out of my 95' today. It came out quite easily. Getting it back in with that lower bolt not clearing the serpentine belt- stupidity on Chrysler's part:-(. So now my 10 minute repair is going to take me half the morning tomorrow to put it back in- grrrrrr! This video was of great help, that petcock doesn't do anything to drain off the cooling system, you gotta pull the hoses! My other "DOH!" for the morning was having my bucket in the wrong place- my neighbor walked up to say good morning and have a chat for a few minutes, and I wasn't paying attention to where the water/antifreeze was falling. We got it cleaned up. TOmorrow I am flushing my heater core- always make sure you do that when you flush your system!
glad the video was helpful! That seems to be the way it goes sometimes. A 10 minute job turns into a much larger job because of one stupid bolt or part in the way
Now I have a cutoff tool just in case...haha. I have a feeling when I go to put in my lift next year it will come in handy..along with my reciprocating saw and my breaker bar/pipe setup. I might spring for a 30 gallon air tank and an impact gun before then, haha.
StormLaker1975 i did my first lift without an impact and my second one with an impact gun and it made it so much quicker
It's on my wish list for Christmas, haha.
If I'm going to change the thermostat should I change it before or after I do my flush?
Good vid! Imma bout to do this on my 95' XJ. This video was great inspiration and helpful - thanks!
Glad to hear it!
back flush your heater cored while you're at it...
Shaggy one how did you do that?
i love driving this vehicle its fun to drive
Hey so I got to the top hose flush with the hose and it's just spewing right back out. Not going to the lower disconnected tube. What's that mean?
Dude me too dammit
@@iriehiphopgirl This guy had a defective thermostat, allowing the water to flow into the block. Another good way is to spray water through the heater hose that connects into the water pump. This is the bypass hose that bypasses the t-stat.
@@ethanwalton980 thank you so much for the advice! I ended up flushing out the system section by section, starting at the heater core. I inherited my 92 Jeep XJ and my mom hadn’t flushed the cooling system in over 5 years…. It was a doozy. She’s running good now though!
Very good video you explained everything perfectly.❤
Thanks!
Hey man, thanks for this video. Before I do this I was wondering... how long did you run the Jeep while it had the water/flush cleaner in it? Thanks!
***** Hi Mark. i ran the jeep just long enough for it to reach normal operating temperature (210ish). it took about 10 minutes or so.
Cool, thanks so much! I'm looking forward to doing this. It's amazing how much car maintenance is easy to do if you just know how!
Hey Admiral great video i just replaced my fan clutch radiator and water pump and serpentine belt on my 92 cherokee after doing all this i looked in my original owners manual and iv never seen or heard of this but there is a engine block plug under the manifold for the coolant flush it said to leave the radiator cap on and remove the engine drain plug and drain cock and supposably it will drain everything the over flow and block everything do you know if this is not recommended ? Also i know you live in AZ where its all ways hot what temp does your cherokee run at ? I had mine jump to 230 while 4wheeling on the beach and i read that it is NOT uncommon for it to go that high but normal operating temp is 195 and thats why i changed everything now it goes as high as 195 but at night when its cool it doesn't go over 190 which im happy with but i worry when im on the beach again that it will shoot up again under the heavy strain does yours ever go up to 230 when 4 wheeling ?
Thanks Admiral
I just want to know how you managed to get water to flow through the thermostat housing. If the thermostat is in place and functioning properly, running water into the top radiator hose should simply fill up the hose.
I found out later that the thermostat had actually failed and was stuck open. You would need to remove the thermostat to do this
This is the ONLY good video I've seen on this. Keep it up!
thanks!
When I spray water into the upper radiator hose water does not come out of the lower hose, it just builds up in the upper hose.
Why doesn't mine behave the way yours is? 98 XJ 4.0.
Great guide. Just bought a 93 xj with overheating issues and just replaced the thermostat, water pump and fan clutch. Up next is a coolant flush for piece of mind. Hope that helps my problem. Is there anything I might be missing?
sounds like you've got the basics covered. If you continue to have overhearing issues you can get into fan upgrades and hood vents but i would do all of the things that you mentioned first because the other two won't do much if your cooling system isn't in good shape.
Admiral Off-Road okay, and thanks for the quick reply! Gonna subscribe now 😊
Drain wate,r
Drain water
Not sure if I just missed it but after you refilled the radiator at the end did you also refill the overflow?
Great video. I'm wondering why my jeep is overheating. I also noticed the coolant isn't draining from the reservoir. It seems like its not going through the system. What could be causing this???
thanks a lot. I was wrestling with that stupid plug for an hour before I found your post
+K. D. Mann I tried to get mine out first too. Not sure why they made it such a pain to get to and remove.
+Admiral Off-Road I would even prefer your hose clamps. my 99 has the clips which are more difficult in tight quarters
+K. D. Mann that sucks. The hose clamps are pretty easy.
+K. D. Mann By the way, I think you're subscriber number 600! Thanks!
Ok good sir, your channel is definitely the best out there for such things. So, I followed your steps like the Bible and everything worked great except the upper radiator hose flushing. I put my garden house in there and it just filled up with water and never came out the lower radiator hose (which of course was detached). I kept filling it up, and you could hear it filling up, but the water never would come out except for when I turned that upper radiator hose upside down. When I plugged everything back up and filled with anti-freeze I could only get about 1 gallon of anti-freeze in there.
What do you think is the problem? Everything else went well, no overheating.
your thermostat is probably blocking the water. I have a video on how to replace the thermostat, but if you remove the thermostat and reattach the housing, the water should flow through fine.
Hey man thanks for the tip. I'm going to watch your video and give it a shot. Really appreciate your response!
Good luck! let me know how it goes!
1999 Jeep cherokee sport 4.2 6 cyl. Great video, easy to do. I also changed the coolant sensor as well because my gage stopped working, it's working great now, temp is reading a constant 210 when vehicle is warm. The issue now, is I lost all my cabin heat! The heater was working great when I ran the coolant cleaner through it, and after the coolant change for the first day. But today the heater does not blow hot air anymore, just cool. The blower is working fine. Any clue why? Thanks for your help!
Sounds like some air trapped in the system. The heater uses the hot coolant to warm the air that the heater blows into the cabin.
Any cylinder head cracks yet? Mine just cracked between cylinders 3 and 4 which is the typical spot. If you crack since this is a design flaw on the 0331 head for 2000 and 2001 get a TUPY head or one from Alabama Cylinder Head with a very improved casting.
Help I’m a 63-year-old female and I’ve done everything you said but I can’t get the water to flush through the engine from the top radiator hose. I called my mechanic and he says it’s because my engine is cold in the thermostat has it shut off.
Not sure what to do. When I went to refill the car I could only get in 1 gallon of antifreeze in about a half gallon of distilled water. I feel like there’s something going on between the top radiator hose inside the engine block because the check engine light keeps coming on, but I don’t know how to get the Flush completely done.
Very informative. Currently working on fixing an overheating issue I have on my 2003 Jeep Grand Cherokee since moving down to the Phoenix area. May have to end up doing this. Didn't even think about adding coolant first. Quick question though, how much water did you use for flushing the radiator? I live in an apartment complex, and don't have the luxury of using a garden hose. I might just pour water in from the kitchen sink if it isn't too much.
I can't remember off the top of my head. If you could get around 10-15 gallons, that should be enough to flush it.
Good video my cherokees coolant also looks like that so im gonna do this and hopefully thatll be problem solver.. It only overheats on real hot days
Thank you very much for your video. It gives us newbies a chance to get around to actually do some work on our cars on our own. =)
Great, helpful attitude.
God Bless you.
Thanks!
Thank you for sharing your knowledge. Do you know why my jeep's horn keeps activating itself, this is a very annoying problem. Thank you again.
I had that happen to me once. I ended up disconnecting them for a few hours and when I connected them again they were fine. I think the connection can get loose at the horn itself and make the horn activate on its own
Not sure if you fixed problem, but there is a fuse that if removed, will turn off horn. Also if your check engine light is on, get codes read. If it says clock spring,that is your problem. Bad clockspring sends high voltage to the TPS causing rough idle and also makes your horn go off nonstop
Hey! I was going through your video step by step, and I noticed when I turned my jeep on to let the flush go through the system that it started to creak here and there when I turned on the heat, is that normal?
Should mention that the thermostat being closed won't allow for a full flush of the engine block and removing it is not advised if you dont have to. Bottom bolt is a pita and the design of the housing is common to leak. Dont mess with it unless of course the stat is bad and needs replaced.
when i’ve done mine i would run engine with heat on to get that dirty stuff out, but nowadays at over 60 years old i look for shop that has the flush system that pulls old stuff out and new stuff in its fast and no mess, of course it costs more be worth it
Best thing to use when draining the system is a cement mixing tub there low and rectangular they catch it all. You can get them from a home improvement store. Because the fluid spills everywhere otherwise. You never really get it all in the bucket.
Rick C137 You never really did get it all in the bucket,, Another trick is laying out a tarp under the vehicle and and surround it it with any absorbent.. It catches all that doesn’t go into the bucket, soaks it up, and can be swept/scooped up pretty easily. I do the same thing for oil changes to protect the ground or garage floor. Thx Rick
What do you do with the old coolant when you’re finished?
My coolant looks clean and full but still going to clean the system, but I have one question: my coolant reservoir seems to drain very quickly so I sometimes run with no coolant in the reservoir, but the engine doesn't overheat. Do you know why this would be?
Great video man I blew my top radiator mudding and got a professional flush and it didn't solve my over heating problem so I may think it's my water pump but first I'm doing exactly what you just did!?
Good luck! Hope it solves your problem.
donny moran any update on your overheating issue?
did you use distilled water for when you cleaned it through? and how did you get it to be pressurized through the garden hose
Great videos
I am doing this twice a year before summer and then again before winter. Only step that Is recommended is to blow the hose water out with air from a compressor. I actually used a small portable desalt leaf blower.
Probably not a big deal but the theory is the minerals in the water from your hose will cause issues.
You apparently failed to mention that you MUST have previously removed the THERMOSTAT! Otherwise water would NOT flow from the TOP radiator hose into the engine compartment to flush it out. The thermostat is a spring coil heat activated valve that opens up when maximum temperature indicated on the thermostat is reached to ALLOW hot coolant to pass thru and circulate into the cooling system for heat dissipation and to maintain a consistent operating temperature.
Would running water straight to heater core hoses with the heat switch turned to high and the jeep off be a better way to flush heater core or is running water through the lower radiator hose like you did doing the same thing?
Nice video!
I have a question,amm ,i did evertying like you did ,but when i remove the second radiator hoes or how you call them ,i cant pour water in there ,becaus it doesnt go throught all the way to my bucket ,or i did something wrong? Have xj 1995.
LVcubers if you have that problem, remove your thermostat. It is blocking the flow. It seems about 50/50 on people having that issue
Admiral Off-Road Thanks! It worked!
glad to hear it!
I picked up an 89 XJ and the thermostat-heater core and water pump-heater core hoses were taken off. They also have the “T” inline for the pressure tank. My goal is to install the coolant filter but not sure where the four ends are supposed to be in accordance with the filter housing. You have any pointers?
Question if when I try to out water on the upper hose by the battery of water returns back does that mean my thermostat is open and doesn’t let water thru?
One thing I would do is check the antifreeze with a hydrometer after it's been driven for a little to see how close the mixture is to 50/50. Should be seeing around -34*F.
Great video, thanks for the help
Thanks man your videos are super helpful. I just got a 2001 Cherokee with 180k. Im trying to figure out everything i should/can do to clean it up and make it run good and last long. If have any advice on where to buy replacement parts for a good price i would appreciate it.
which parts are you looking for? some parts need to be purchased new, but others can be gotten used which can save you quite a bit of money
Admiral Off-Road I had a leak in my break line on the driver side so I replaced it, and bleed out the breaks. There's pressure when is turned off but when I turn it on it goes away and break light goes on. Could it be bad master cylinder?
that's a possibility. You didn't have any issues with the brakes before bleeding them?
Admiral Off-Road lol I watched the video again and didn't see that part where you left the motor running. Now it works great. Would you possibly do a video on how to restore a rear axle and make it like new?
Which axle do you have? I have done a video on tearing down a Dana 35 rear and a Dana 30 front axle. I currently have a Chrysler 8.25 rear axle if you have any specific questions, I could probably help you out but the axles I have now are in pretty good shape, so a rebuild is probably pretty far down the road
I know it’s bad to use tap water when you fill the system to run. But is it worth it to fill it with distilled water when you flush it too? Or is this overkill
thanks man helped me immensely. You in CA? I got a 01 Cherokee and it has some problems, I've been able to diagnose and fix some but there's others I have no idea where to start!
Glad to hear it! I'm in Arizona
okay so i recently flushed, now it is overheating and smoking near where the upper radiator hose connects to the radiator. I am replacing the hose this weekend but it seems like very small leaks could be coming from the radiator wall where it connects? not entirely sure, wondering if you had any ideas.
Is it a plastic or metal side tank? I had a plastic one crack and had to replace mine
Great video. Very easy to understand and follow. Thank you.
thanks!
hey man, good clear video, I flushed my 2000 4.0 like you did however I used distilled water for the whole process, a bit more expensive but worth it for the piece of mind of have pure h2o and coolant in the pipes, then put a 50/50 mix of Zerex ZXGO51 G-05 Antifreeze after reading some reviews about the chemistry, I also replaced my 195f thermostat with a 185f thermostat because I'm usually in a very hot climate, so thanks for letting me watch it be done first before I attempted myself... I'm interested in if you know anything about that little bit of noise coming from your rig, it's almost like a very soft lifter tick, I have the exact same noise in mine and it started after putting synthetic oil in just one time! I know it's not threatening to the life of the engine but it still bugs me, any ideas?
Taylor Horton The tick is super common in the 4.0. I think, in mine, its a lifter.
Admiral Off-Road just a normal operating noise because of the 4.0L's flat tappet camshaft.
It's probably a bad idea to run a lower temperature thermostat. Your engine is supposed to run at 210 degrees F. If it runs hotter than that in any climate something is wrong.
My 1994 makes the same noise and also only began after one synthetic change. It makes me bonkers, but it also has 216K.
i heard the same thing as soon as he started it up.
kevin tyree, how much water were you able to put into the upper hose before it started coming back out the top? Sorry im not able to reply to your comment directly. Not sure why UA-cam is not letting me.
I'm having the same problem. Tried running water through the top hose and it just filled up and didn't drain from the bottom. It only took a few seconds for it to fill up. Possible clog in the system? I'm doing this flush because my 93 grand cherokee keeps overheating at idle.
bobhuth Hey man, make sure your fans are spinning and the fan shroud are not damaged. You know you radiator is likely working as it's cooling while your driving. IE there's enough coolant going through it to be cooled by airflow.
+bobhuth Try taking your thermostat out.
waiting to long with the cleaning, or not using destill. water, or based on a defect, the thermostat is always in the close position,
img0.uploadhouse.com/fileuploads/22565/22565840cdc01ca6d33cb5e55901d880971cc01e.jpg
that caused the overheating problem, cause the cooling system hasn`t a proper circulation.
99 Jeep Grand Cherokee brake control wire location
How do you know when you’re completely done putting water or coolant in the system??? That’s the part I’m now confused on.
Awesome video, so easy to follow. Thanks mate.
+NicoleHerrickDesign Thanks!
If you’re able to fill/flush from the upper radiator hose your thermostat is possibly bad/stuck open. Just a thought.
When running water through the top hose, does it have to be warm to get through the thermostat ?
Quick question, how did the water get passed the thermostat when putting it directly into the top of the engine? Wouldn’t that mean your thermostat is stuck open? Cause mine doesn’t let anything flow in from the top and I just did a thermostat and water pump.
Watch the beginning. He warmed the motor, then shut it off. He then disconnected the hose just after it cooled enough so the system was no longer under pressure. The heat from the block keeps the thermostat open, so water can flow through the block.
Undoing the plug from the bottom and disconnecting the small hose from the side of the cap then put the tip of the hose under the car and suck through it a little bit then gravity will do the rest and you rinse and drain your reservoir.
Great instructional video. Thanks.
Great video! Got a little problem though; when I went to flush the upper radiator hose/engine it's not flowing freely. I turn the garden hose onto not even half power and it's still spewing back out the upper hose. Off the top of my head I'm thinking blocked passages, but my radiator went just fine and usually from my experience the radiator clogged first. any clue?
btw this is my first jeep. 1992 jeep Cherokee laredo
you might have to remove your thermostat. It could be stuck closed and not allow the water to flow through
+Admiral Off-Road good call, idk why I didn't think of that. since they're cheap I'll probably just replace it, what's the opening temp on these 4.0's
I have either a 190 or 195 thermostat (can't remember) and that works fine even in the summer in Arizona. I have a thermostat replacement video if you need to reference it but the process is pretty straightforward.
+Admiral Off-Road yeah our summers aren't Arizona hot but in NC they get pretty sticky. thanks for the heads up ill check it out!
Hey great video, gonna flush this weekend.
Can I take off the other end of the hose instead and have as good of a drain?
Hey, do you have any videos of replacing the Thermal Expansion Valve? Or ability to walk me through that? Haha.. I cannot find ANY info online for that!
When you used the hose it wasnt distilled water right? Does completely flushing it after make it ok to use hose water? or should I flushed with distilled as well
also, you added everything directly through the radiator..should I fill up my coolant reservoir with 50-50 (assuming it hasnt after running to operating temp)
Hi Mark. That's correct. The hose was just normal water which is why I emptied the system again after running the hose through it. If you have enough distilled water, then you could run that through the system as a final flush as well since it is impossible to completely drain the system. To answer your other question, yes you should also fill your overflow reservoir to the proper level.
Admiral Off-Road sounds good thanks man
Mark Romano no problem. and good luck!
THANK YOU.
I must have looked at 5 other videos, and none of those morons even showed how to find the drain valve, let alone how to work around the ridiculous set up by Chrysler.
Best Video for this job!
Nice video. Been wondering how I can flush out the cooling system; the day I got my 97 Cherokee. Now, I was wondering if you could type out all the things I need to get or need when I am doing this? I don't know why but I can't hear the sound from your video. It could be my speakers or just "UA-cam" but anyway. Thanks for your great work on the video. Hope to watch another video that could help Jeep Owners like us "including you". How to maintain our Jeep. :D
BCJeepCherokee you'll need a hose, a bucket to catch the drained coolant, a few gallons of distilled water, full strength antifreeze (not 50/50 premixed), radiator flush (optional) and a screwdriver to undo the hose clamps. you will undo the lower radiator hose to drain the old stuff out, then undo the upper radiator hose and run water through the system using the hose until it runs clear. next, re-attach the hoses and fill the radiator with just water and the chemical flush. run the vehicle until it warms up completely and turn the heater on for a few minutes. drain the system again once it cools down and run the hose through it again. next you will fill the system again. put the full strength coolant in first. this is to get a 50/50 mixture. its impossible to completely drain the system so there will still be water in there. find out what your cooling system capacity is and put half of that amount worth of the coolant in. next fill the rest with the distilled water. let it run for a while and try to get all of the air out of the system. keep an eye on the coolant level for a few days. you'll probably have to add a little bit as the fluid level will appear lower when you get all of the air out of the system. hope this helped and good luck!
You sir, are the true gentlemen. Thank you for summarizing for me. I will let you know, how it went. :) Cheers.
BCJeepCherokee Thank you for the kind words. if you have any ideas for future videos that you would like to see. let me know!
Admiral Off-Road Oh Admiral, I forgot to ask. How many Coolant should I buy?
BCJeepCherokee I bought 2 gallons. I had some left over at the end but its always useful to have some around for topping off every once in a while.
Hey Admiral great videos do you have 1 for the oil pan gasket? iv watched other videos and they make me afraid to attempt it
No, sorry I haven't had to replace mine.
Thanks for the reply I ges I will take it somewhere it might be more then just the oil pan gasket anyway thanks and keep the videos coming your one of the few guys on UA-cam that knows what your doing
Thanks
Chase NY long island
_lh3.googleusercontent.com/q6DkK8fNoHBxx8ir2EbTtvQtC-tYTelEGHFXfokbWVN2azsXNmYo0_ep2Djp6go0sbz7uqEP1Q_
Good luck. The link that you posted is coming up with an error message.
So how do I go about bleeding or burping my coolant if I have no heat? 😅
Thank you Justin Beiber for saving my xj
Great video just did my 99 xj
Not quite sure how your system can be flushing through the upper rad hose without your motor running to open the thermostat?
I had the same question. 1995 4.0
Probably has a bad thermostat because it was cold enough to change and not bubble over which means either he has a bad thermostat or he is running a really low spec thermostat; OE is 195°F
Hello from Costa Rica...I have a 1992 XJ 4.0 do you know if it also uses 3 gallon of coolant? Thanks for your help!
Enrique Gonzalez The older XJs cooling system is a little different than the later ones (closed vs open system) but from what i've read it should be about 2-2.5 gallons (about 10qts)
Admiral Off-Road Gracias my friend...keep up the good work...I really enjoy your videos...
thank you!
any thought? so i tried doing this and when i got to the top hose. i tried putting water trough it but it just filled up. like the water was getting stuck somewhere. the water never went trough and came out the bottom radiator hose. 2000 xj sport 4.o
having the same problem
@@doubledmetaldetecting9582 the thermostat is closed. If I've read correctly; push water through the small hose that goes to the thermostat it's open constant.
he failed to mention he pulled the thermostat out obviously so the video is incorrect and would fail to flush anything from top rad hose! And my cat is dead from that coolant he left in street! no thermostat= no cooling , no flush =no fix
my fav. 4:47.... thank god you wernt looking at the hose lol.. yet another great video, tho!!
Thanks!