well i'm hoping i can get more followers by next summer but i need to start putting up more videos because i have pretty serious plans for it next summer
Wow! What a really well put-together looking setup you have. So many Jeep videos are the worst examples of hillbilly engineering. It was really nice to see a rig like yours. Good job!
Nice job ! I have XJ 97 has 91 factory all metal radiator mopar brand ,zj fan and clutch, factory 198°thermostat and factory housing and water pump, and factory radiator shroud witch I believe makes the biggest difference so it only pulls air though the radiator.
When I got my 98 XJ it had 120k Miles on it and the Heater Core was leaking and the Water in the Radiator was Super Rusty And yes it was running Hot on a Cool day. I replaced the Radiator with a 2 Core Champion it has 1" cooling Tubes and flows 3 times better than a Stock Radiator even with a Stock Pump. , replaced the Heater Core, New Thermostat 180* and on 105* Days I can run the A/C and Put around all day Long , the Temp Needle Tries its Best to Get to 210 but it has not made it there so far. I did this exact same thing to a 96 XJ about 8 years ago and when I sold It the Temp gauge was reading the Same. Since then several other owners of XJ that trail with me did the Same thing and so far they have gotten the Same results. Be sure that if you XJ came with a Fan Clutch make sure that it is Working Properly, if the Fan Clutch is 50% shot you will notice about a 10 to 15 Degree rise in your Temp, That was with the stock Radiator. Check out the Champion Radiators, I also Buy and Rebuild Classic Corvettes and this is one of the First things I do to them also, Replace the Radiator with a Champion and that has always eliminated the Corvette's from running Hot even the Big Block 427 will run cool in stop and go traffic. Replace the Coolant every year with a Gallon of Coolant and the rest water and it works just fine for me. God bless America and its Disabled Veterans.
Two things you guys have to take into account. The stock temp sensor and gauge are very inaccurate. Measure temps using a more accurate device. IR scanner, after market digital gauge. The other thing is air temps. Air temp makes a huge difference in how well the 4.0L engine cooling system performs. The XJ 4.0l engine cooling system is marginal at best and that's before you lift one and get even less air flow through the radiator.
Lol 4 years later I will comment. The 4.0 was never supposed to go in the XJ. It was shoehorned in and airflow is not optimal. Maintenance is key. Flush the cooling system regularly. Change oil. Any engine that has the intake and exhaust on the same side is going to have higher then nominal temperature rise. Wire up your electric cooling fan with a time delay relay to prevent heat soak. 4.0 engines regularly last 2 to 300k miles if properly maintained. I know mine have.
Unless you have an old renix setup with the closed cooling system and pressure bottle that leaks from every connection when it gets hot instead of just venting.
Man,you know how to avoid over heating,i salut you I went for same water pump,v8 clutch fan,after market thermostat,and thats it Temperature here in summer over 50C and i drive my xj in daily basis without worrying about any and a/c on
ibrahim khubaizi you're not getting the full benefits with the stock housing pushing more volume you need to upgrade lol it's like $40....all that's really left to aid cooling are some hood vents but I need a new hood first
Flex-J Steve Totally agree with you,thing is its hard to find parts in here(im located in Kuwait) and shipping will take much time and money if i want to order,but so far my xj doing great
ibrahim khubaizi you can always find an alternative and have some ship it to you personally lol...but yeah I'm sorry that you have a hard time with it...even if you got it 6 months after you order it it's still worth it and would only take you maybe 10 min to swap out....but I'm happy to hear it's running good
I am planning on upgrading my XJ in a similar way before Christmas this year. Any help on part numbers you can provide I would appreciate it. Good job on a first video too!! keep them coming!
My temperature climbs when I'm sitting still, however I did just change my thermostat a lower temperature thermostat from 195 to 180 could this possibly be the reason why? I also changed from the stock thermostat housing to an aftermarket one from Pep Boys?
Thank you for the video. Could please share with me the links of where to purchased the thermostat housing, and also the lower hose with the coil in it. Thanks
Hi, I know this is a old vid, I am trying to upgrade my cooling on the XJ and like the simple things you have done on your Jeep. I am in Australia and would like to get my hands on the thermostat housing and the high flow water pump. Can you point me in the right direction please. I also like your head lights, please let me know where you got those from too.
Looking for a lower hose with the spring in it 96 Cherokee XJ 4.0 HO. Looking for a factory coolant temp sensor with gauge same vehicle. Also looking for factory radiator same vehicle. Also looking for a quick disconnect for the automatic transmission line The female end. I didn't catch what kind of thermostat housing you have on it thank you for your time
Thank you for all your info. I got the name and numbers for everything . And thanks for the tip on the newer Lower Radiator hose With spring. I will be upgrading my 99 XJ for a better cooling system . Cheers Steve.......
Very nicely done and explained! I like it. If you could put the name and perhaps part # of the special parts you used to improve the stock system it would be greatly appreciated! Thanks!
I am putting in my 4th and final 4.6 stroker. I actually have the Hesco T-Stat housing and Flowkooler WP as well. I never had any success finding that lower coolant hose with a spring to prevent collapse. I've read that the lower the pressure in the system (which a collapsing hose would cause) the more the fluids can approach bubbling/boiling temperature, and the water pump circulation increases that by using fins to pump the water, which causes cavitation (H20 turns into HH and O, this is where the bubbles come from when you shake water in a bottle, run water full blast through the faucet, or submerge a propeller at speed into water - which is just what the WP does). Submarines need special metals in the propellers to keep them from falling apart because of the pressure differentiation from the cavitation it causes on either sides of the fins. It creates amazing low pressure, and the more your WP flows the more negative pressure you have on the bottom inlet, and the more it will collapse hoses. No one should be using that higher flowing water pump without a springed lower hose, especially with a thermostat that opens and closes in binary mode. I highly recommend you spend the extra $2 and get a premium thermostat that opens variably based on temperature, like the Gates or FelPro units on RockAuto. It's a more even flow without the drastic transitions between high and low pressure caused by open and closed operation. I just put in a set of Flex-alite pusher fans in front of the radiator and will be wiring it up today so I can push air into the fans on the other side that pull, instead of buying a bunch of fans while losing 2 that work just fine. I have a supercharger as well so I need all the additional cooling I can get. Also, if you have a 00-01 XJ, toss that dual cat setup right beside the engine. That's causing a ton of excess heat and is where the misfires and eventual cylinder head crack comes from. Get the old setup with 1 cat in the back under the carriage. That infernal setup was engineered to cause problems, along with the lower pinion angle on the front axle. Maintenance sales just weren't high enough for Jeep.
Wayne Sanders I have a whole different video on exhaust...I have a 00 and gf has an 01 both had California emissions and both were swapped with zj engines and converted to federal
Wayne Sanders sorry to burst your bubble but the high pinion is from a TJ Dana 30 which Jeep had a lot of and did not want to reorder low pinion for a model that was already chopped. The cats and all the emissions garbage on the 99 and up XJs were due to increased emissions requirements to keep the 4.0 emissions compliant.
Flex-J Steve whatever you say Dr. Jeep. Just sharing what I know having been there and done that when these cars were still leaking oil on the showroom floor.
Good info bro I want to buy a Jeep XJ what are some things I should lookout for ? I want to make sure I buy something that won't make me feel like I wasted my money
Hey Steve, Thanks for the video. One question; I got fancy new higher temp silicone hoses but without the metal coil included. Is there a way to insert a metal coil in an aftermarket lower hose?? Thanks
I just happened to come across your video... I see your Jeep xj has an OR-Fab front bumper which by the way is no longer made. I think I might have bought the last one they had before OR-Fab went out of business. Yes, I have the same exact bumper on my Jeep xj. I also see that you have a winch. What I want to know is, what brand or kind of winch you have and what size is it??? I'm not sure which winch to get and by looking at yours, I thought you might be able to help with an idea. I'd very much appreciate your input.
They still make it. They shut down for a while and then they opened back up again. What you are talking about is what happened a long time ago that’s not recent at all. I have a Smittybilt x20 10k synthetic with the box relocated in the engine bay by the firewall with 2/0 wire ran for it and a 380 amp alternator.
If you have overheating problems and you are NOT hardcore crawling in 115*F weather, you just need a rebuilt stock setup. The flowkooker pump is nice but I don't have any overheating issues with a fully rebuilt factory setup, running 35" tires and doing lots of hot weather offroading. If you have a fully built buggy or something you might want to throw in an aluminum 2-core radiator (mishimoto) but they are known to crack at the welds over time, as well as a ZJ fan clutch. Almost no electric fan setup will match the flow of a belt-driven fan with the ZJ fan clutch That said, I am running a Napa water pump and fan clutch, an OEM Mopar thermostat, and a Spectra stock replacement radiator, as well as Gates hoses, and a stant 16psi radiator cap. Works just fine for me and I always use the air conditioning. If your AC condenser is filled with rocks, it will affect airflow to the radiator so don't overlook that. The Flowkooler pump will boost flow at idle but not that much over 2000 rpm. A thicker core radiator can help with dumping the heat out but has its own issues such as the welds usually being sub-par. A lower temp thermostat will NOT help overheating issues, and will lower your fuel efficiency, the motor should be at 210*F and should not exceed 225*F or you will risk warping the head over time. There is alot of info on various Jeep forums so do your own research and make your own decisions based on your usage. The stock system works just fine for me
@@flex-jsteve540 Nice looking XJ!!! I took my stock thermostat housing and ground it out to flow more. I ordered a Flowkooler water pump from Hesco and they cancelled my order themselves saying my stock water pump was already high flow. How many companies would do that!!! I got rid of my stock fan and went with a 2 speed Thunderbird fan on my 2004 TJ. Stock setup just didn't do it in the So Cal desert. I wish I would only see 90 degrees...
There is no Mishimoto made in HISTORY that made it past R&D has “cracked at the welds.” Whoever told you that is an imbecile of the 12th degree. There is no better mass-made radiator on Earth. Period. Yes, there are a FEW racing company’s that can make an equal or better radiator, but for the masses-Mishimoto is it.
Hey I’ve been trying to find factory cooling systems part but I’m having a hard time finding them. Gone to the dealerships here and they keep telling that they carry them anymore! I have a 2000 Jeep Cherokee 4.0L
Just bought a 06 Chevy and I ran it the other day and the temp gauge was going up in temp what do you recommend me replacing first to get it running and not over heating
My 2000 xj classic runs good until I start to slow down , as soon as I slow down or after a while of running the Temp. Just spikes out of no where. Can you help ? Idk if it’s a water pump issue or a thermostat
Kyle W they aren't universal parts so there should be no confusion on what to get once you simply give year make model....not to mention this was done long ago and part numbers or not you still have to go through the same steps to obtain the parts so that's just a lot of unnecessary work
CHECK YOUR FUEL PRESSURE. I had a weak fuel pump causing a lean running condition. Leaner mixture runs hotter. My XJ would start missing like a stormtrooper whenever I got near 210. Its kuz the fuel rail pressure was not high enough to keep the fuel from boiling. New pump, runs much cooler, and even when I have gotten it up to the line after 210, no misfire.
@@flex-jsteve540 nope. My 2000 Cherokee never once threw any cel other than a p0303. Cyl 3 misfire. And that was only if I sat with it idling too long. Fuel pressure got so shitty that it would just fall on its face if I tried to throttle up at all. When I finally tested fuel pressure with a gauge rather than depressing the Schrader on the rail, she made a whopping 3 - 7 psi. New fuel pump also solved what I thought was a transmission issue, nah just turned out it couldn't supply the necessary amount of fuel.
@@flex-jsteve540 cel was intermittent and would clear itself after a few drive cycles if it didn't get hot. Snap on Apollo D9 scan tool identified the problem as bad coil or bad plug. Injector was functioning as designed and there's no fuel pressure sensor, never once did it point towards the fuel pump. Lack of power was definitely noticed but was attributed to 37's on 3.55's. I've had plenty of 4.0s but never had such large tires on such a tall ratio until I picked up this one. Nevertheless, a fuel pressure test never hurts unless you spray it in your eyes and according to FSM 43 psi is the minimal pressure acceptable.
Wow all that to keep it running cool bro you spend a fortune on all those parts. I have a 2001 jeep Cherokee HAD the same issue all I did was flus my heater core and buy a thermostat to release the pressure at 165 now on a hot day of 109 degree weather it goes a tad bit over 210 with AC running
@@hectormarkmunoz no I haven't but I live in Texas as well and I had the same problem till I did the switch on the thermostat till this day it's still driving good and not heating up passed 210
Did you have problems with the hesco thermostat housing leaking from the bottom of it? I've put on 4 blue gaskets from autozone, before I replaced the OEM thermostat housing it wasn't leaking before but now it is. I haven't checked to see if their is any cracks on the head where the thermostat housing goes on but I doubt it's cracked though. Can you give me some advice why it's leaking?
There’s only a handful of ways it’ll leak. You didn’t put the hose on all the way, it’s cracked, it’s not machined flat, you didn’t clean the surface well, you didn’t rtv both sides of the gasket, you didn’t torque correctly.
@@flex-jsteve540 Thanks for the quick reply I did put new hoses all around and their pretty tight on the connections I did clean off the surface too. About how much torque should I torque them down to.
Hey my 1998 Jeep Cherokee shuts off and it over heats, but it has a 1996 motor in it. We are going to replace the radiation and I am watching videos on UA-cam. Can you please help me.
I think they are the STARR HID bi-xenon lights headlightrevolution.com/starr-hid-starr-hid-xp6054b-bi-xenon-black-projector-headlights-kit-5x7-rectangular-sealed-beam/
reddyuda they are...funny you say that because I bought them a year ago from a different website and they discontinued them and just tuesday I discovered them from their actual source lol
@@flex-jsteve540 I know but I noticed your valve cover so clean I cannot find a set for my XJ I am tired of looking at the oil leaks from the valve cover.
gargato1970 it’s called washing it....that’s not even my new one either in the video....then replace your valve cover gasket I’m not understanding your issue here
Dawood Shahrestany keep the air conditioning....you're not a slave and as stated in the video I can go out off road on 100 degree days and I have zero cooling issues
Dawood Shahrestany if you do the same parts and everything is clear you will have zero issues....I've done it to 3 jeeps now and if you continue to have a heating issue something is wrong....just like the guys who add 3 electric fans and stuff you would be just avoiding the problem at hand...no problem man
Dawood Shahrestany that's good if you ever need more help feel free to ask and I'm working on it but I'm super slammed right now but soon I will be making a new video
Kendal Morris yeah literally replace everything and build a stroker while you’re already there felpro master gasket set horseshoe intake 62 mm throttle body k&n intake system bigger injectors flowkooler pump dealer radiator hoses dealer thermostat hesco housing app dealer sensors dealer radiator higher pound cap 330 amp alternator big 3 upgrade dealer injector heat shield banks header brown dog engine mounts I’m sure I’m missing more and if it’s Cali convert the entire thing to fed
Hi Steve...I need some advice if you can...I have a 2001 Cherokee Sport...I'm having some cooling system issues...everything is stock...I'm the winter it's fine but in the summer it gets over 210...just about to the next mark beyond 210...once it got to about 3 marks past 210...no leaks...I'm flushed it but it still "creeps up" in temperature...do you have any ideas what I can do?...many thanks...Charlie
Charlie C easy...start with how long have you had it and how many miles are on it and what you’ve replaced involving the cooling system and what brands
Flex-J Steve Hi Steve...thanks for replying! I've had the Jeep for about 3 years...it had a history of a cracked head which was replaced before I got it and it ran great all that time until last week...it has however always run a little on the hot side...I bought it at 139k miles and it now has 179k miles on it...one thing I just discovered...the bottom radiator hose does NOT have a spring in it...I've read and heard on a video that without that spring in the bottom hose, the hose tends to collapse and restrict the water flow...Is that true in your opinion?...and do you think that could cause the temp to rise as I drive it for longer periods at a time or fluctuates in temp depending on the outside temps??.
Charlie C you should be thankful it’s lasted as long as it did lol as for me as soon as I get one I just replace everything it doesn’t matter if it’s good or bad the thing is close to 20 years old if not more and should be replaced far before that even happens
Hyper_Wolf _Co Starr....just leaned that about a week ago because I originally ordered them off a different website about a year ago and they said they were discontinued but I found the original company that made them and it's starr....great headlight
To cheap for dealer parts if I can avoid it. I never had a problem with NAPA hoses. I even forgot the spring one year and the hose never gave me a problem. Never remove the fan shroud, needed for slow traffic. Buy a cheap tester to check the antifreeze. Buy a good water pump who wants to keep changing cheap ones. Don't over tension the belts as that will also help kill the bearings in the pump. Just my two cents.
Jeep Cherokee then save the money to buy the quality parts it’s not difficult.....so you’re running a flowkooler pump? It’s all stated in the video....never said anything about removing the shroud....yeah that’s why it says flowkooler pump in the video
Sorry, post wasn't directed to you. Just I have seen so many people make these common mistakes. I just changed a radiator that developed a leak, a cheap one that I bought. The only one the parts store had at the time and I couldn't wait for a good one. lasted several years, so much for plastic. It pays to get good parts.
Full flow pump. Cold case wide tube 2 core alum performance rad. Stock fan setup with good shrouds. High flow housing. 2 35,000gvw trans coolers, one with fan under rear seat area other in front of condenser and trans not ran through radiator anymore. Dynatrac pr 60hd rear Dana 44 front. 4;88gears 35” tires. Lock out hubs front so save gas and wear and tear on driveline in front going down road. Trans speedo gears corrected and replaced most sensors. POS can’t wait to get above 220 and won’t stay below 210. 180 tstat checked that it works in water and can see it working with digital coolant temp gauge with sending unit in uppper rad hose. Also has a New head because shop ruined mine because thin casting doing valve job. Used felpro severe duty head gasket. my jeeps fully built and well taken care of. No rust ever on vehicle or inside cooling system. So wtf is wrong with my 97’. Anyone know?? Came from stock system that overheated and even with trans out of it and zj fan clutch it was hot. Zj helped but took mass amounts of hp. Recently took out cat with no real difference. Actually feel flat spot mid range rpm so getting new one soon. Plus ecm prob knows cat isn’t working. Air fuel could be whack too I don’t know. Lol Question I have a Napa temp sensor and tps sensor. Runs super smooth and drives nicer than any xj I’ve ever rode in. Just rebuilt trans and t case with max line pressure and new updated shift solenoids etc. works amazing but bitch is dying of heat. Could it be timing issue??? Maybe because of that temp sensor?? Any input would be rad.
@@jonathanesteva4265 yeah for sure you can’t go wrong with top shelf cooling components it’s better than replacing your whole engine which is a whole video coming to here one day lol
You have a rad cap on yours. Mine does not have a rad opening, at all.... lol 89 4.0L that’s why we customize the cooling system cause they’re not all the same. And mine.... sucks! Lol pressured resivoirs suck in general!
Thinking about it but there’s none in my local yard. New parts are not as budget friendly. I’m starting with a double electric fan. Hopefully that’s enough.
You could have made them yourself, easily, for $70. I love it when guys bolt-on stuff and don't actually build anything, then pretend they have some sort of knowledge.
+JeepITguy who dumped in your cheerios? i "love it" when some guy who has nothing to offer but pointless criticism pollutes a video thread with armchair knowledge.
Schon Mack rough trash “3 inch lift” and 31” Michelin defender ltx.....ordering a real lift tomorrow the guy before me put on this pathetic excuse of a lift
Flex-J Steve it's a fan shroud bro not a transfer case. $15, three years later later...I'd say that fan shroud is holding up good. Junk yards are good no doubt to find certain parts.
I have a 99 xj and on an average day driving to work 15 minutes away it will reach above 210 with the ac on and my fan never turns off, even just driving 25 minutes to town it gets up to 230 and i can never have the ac on! I’m no mechanic but if I buy the right parts on the video hopefully it will bring my temp down quite a bit and save my engine from overheating all the damn time
I put two stock AC fans in mine and got rid of that clutch fan and mine works pretty good I just hooked them up to my ignition so they run all the time and in the winter time I will probably just pull the fuse for the one on my driver side and just run the passenger side one
Stop doggin this guy out, i have the same engine and an open thermostat. My 94 ZJ never gets above the half way mark even in rough traffic or trails in the summer. Temp always stays under the second hash mark when normal driving
So saving a nickel every gallon of gas and 5 horsepower is more important to you than a better correct higher cfm system that is not hacked together? You’re on your own
@@flex-jsteve540 well, I’m in Australia, so when it comes to fuel, it’s not so much about the cost, it’s about the distance! Some places I travel to, fuel stations can be 500kms apart! Not only that but outback fuel prices are crazy. So yes, fuel economy matters! Also, I may be carrying a lot of extra weight or towing a boat, so yes, 5hp (actually, it’s more like 10hp) actually does matter! You need to remember that not everyone’s needs are the same as yours! Oh and why would you assume that just because my cooling system isn’t stock that it’s “hacked together”? Because it’s not. It’s high quality, tried and tested and I can crawl along all day in 45 deg C heat without overheating. But whatever, you stick with your old fashioned tech if you want to…
Flex-J Steve I’m stop and go with this thing all day. When I’m stuck sitting with the ac on and over 100 outside it starts to creep to 220 till I drive again.
Flex-J Steve well, in your video, you say there is nothing wrong with the cooling system in these jeeps, but then you talk about upgrading your pump and housing and stuff. My stuffs all new stock parts, and still wants to run hot, so my point is, when you say the cooling system on these are good, I’m not buying it, if it was, you wouldn’t have done the upgrades. If I recall, you said there’s nothing wrong with these cooling systems......
Jbird yes there is nothing wrong with the stock system at all....the concept is going over your head and you’re not comprehending it....you are just setting yourself up for failure here like everyone else with that “stock part” garbage
Ron Ulysses Swanson those are just her street tires....she has different tires she swaps on for mud as do I....she will be getting new street tires here in a month or two
What are some things you guys would like to see on the channel?
lol I mean if by luck they are there sure but not too much I can do about that
lol i can't say i would buy a second one because i don't see the point at all
well i'm hoping i can get more followers by next summer but i need to start putting up more videos because i have pretty serious plans for it next summer
Can you add or send me the part numbers to both the housing and the water pump? Thanks bud.
Juan Cardenas just give year make and model
Wow! What a really well put-together looking setup you have. So many Jeep videos are the worst examples of hillbilly engineering. It was really nice to see a rig like yours. Good job!
Thanks man although it’s nothing like that anymore it’s extremely different now eventually update videos will be coming out
Good information, thanks.
Nice job ! I have XJ 97 has 91 factory all metal radiator mopar brand ,zj fan and clutch, factory 198°thermostat and factory housing and water pump, and factory radiator shroud witch I believe makes the biggest difference so it only pulls air though the radiator.
Eli Sancere to me the only thing that matters is having a clean properly working system with quality parts
I've owned more than 15 jeeps. Factory cooling is first thing I change before trails. Of course I don't baby mine so I need more!
What do you do with ur XJ's cooling system?
When I got my 98 XJ it had 120k Miles on it and the Heater Core was leaking and the Water in the Radiator was Super Rusty And yes it was running Hot on a Cool day. I replaced the Radiator with a 2 Core Champion it has 1" cooling Tubes and flows 3 times better than a Stock Radiator even with a Stock Pump. , replaced the Heater Core, New Thermostat 180* and on 105* Days I can run the A/C and Put around all day Long , the Temp Needle Tries its Best to Get to 210 but it has not made it there so far. I did this exact same thing to a 96 XJ about 8 years ago and when I sold It the Temp gauge was reading the Same. Since then several other owners of XJ that trail with me did the Same thing and so far they have gotten the Same results. Be sure that if you XJ came with a Fan Clutch make sure that it is Working Properly, if the Fan Clutch is 50% shot you will notice about a 10 to 15 Degree rise in your Temp, That was with the stock Radiator. Check out the Champion Radiators, I also Buy and Rebuild Classic Corvettes and this is one of the First things I do to them also, Replace the Radiator with a Champion and that has always eliminated the Corvette's from running Hot even the Big Block 427 will run cool in stop and go traffic. Replace the Coolant every year with a Gallon of Coolant and the rest water and it works just fine for me. God bless America and its Disabled Veterans.
Garry Harris I stopped reading at 180....that’s exactly what you are not supposed to do
@@flex-jsteve540 you are wrong on that 180 stat. 180 in Texas only way to go. Run it 230 if you want I won't be.
James McGinn false
Two things you guys have to take into account. The stock temp sensor and gauge are very inaccurate. Measure temps using a more accurate device. IR scanner, after market digital gauge. The other thing is air temps. Air temp makes a huge difference in how well the 4.0L engine cooling system performs.
The XJ 4.0l engine cooling system is marginal at best and that's before you lift one and get even less air flow through the radiator.
Lol 4 years later I will comment.
The 4.0 was never supposed to go in the XJ. It was shoehorned in and airflow is not optimal.
Maintenance is key. Flush the cooling system regularly.
Change oil.
Any engine that has the intake and exhaust on the same side is going to have higher then nominal temperature rise.
Wire up your electric cooling fan with a time delay relay to prevent heat soak.
4.0 engines regularly last 2 to 300k miles if properly maintained.
I know mine have.
Agreed, stock fans and radiator is the best set up!
1993 Cherokee good man
Unless you have an old renix setup with the closed cooling system and pressure bottle that leaks from every connection when it gets hot instead of just venting.
Good video nice description and detailed explanation of everything where did you get the hesco thermostat housing everywhere I've looked or sold out
Thanks just order it and it gets there when it gets there that’s the world now thanks to the Chinese flu
Man,you know how to avoid over heating,i salut you
I went for same water pump,v8 clutch fan,after market thermostat,and thats it
Temperature here in summer over 50C and i drive my xj in daily basis without worrying about any and a/c on
ibrahim khubaizi you're not getting the full benefits with the stock housing pushing more volume you need to upgrade lol it's like $40....all that's really left to aid cooling are some hood vents but I need a new hood first
Flex-J Steve Totally agree with you,thing is its hard to find parts in here(im located in Kuwait) and shipping will take much time and money if i want to order,but so far my xj doing great
ibrahim khubaizi you can always find an alternative and have some ship it to you personally lol...but yeah I'm sorry that you have a hard time with it...even if you got it 6 months after you order it it's still worth it and would only take you maybe 10 min to swap out....but I'm happy to hear it's running good
I am planning on upgrading my XJ in a similar way before Christmas this year. Any help on part numbers you can provide I would appreciate it. Good job on a first video too!! keep them coming!
a simple google search will give you all the part numbers....which ones were you having trouble with?
My temperature climbs when I'm sitting still, however I did just change my thermostat a lower temperature thermostat from 195 to 180 could this possibly be the reason why? I also changed from the stock thermostat housing to an aftermarket one from Pep Boys?
Mark Breaux do not mess with the thermostat keep the factory one in there if you are having issues locate the problem
thumbs up, great first video, thanks for posting !
MrMrsregor thanks man appreciate it
I have a 2 wheel drive im going to be using for mall crawling.. going to get a 4x4 soon so i can go mudding with them.
Thank you for the video. Could please share with me the links of where to purchased the thermostat housing, and also the lower hose with the coil in it.
Thanks
Names of all parts are in the video
Hi, I know this is a old vid, I am trying to upgrade my cooling on the XJ and like the simple things you have done on your Jeep. I am in Australia and would like to get my hands on the thermostat housing and the high flow water pump. Can you point me in the right direction please. I also like your head lights, please let me know where you got those from too.
Old video or not it’s still relevant lol everything is said in the video hesco housing I have a hesco pump now too and starr headlights
Looking for a lower hose with the spring in it 96 Cherokee XJ 4.0 HO.
Looking for a factory coolant temp sensor with gauge same vehicle.
Also looking for factory radiator same vehicle.
Also looking for a quick disconnect for the automatic transmission line The female end.
I didn't catch what kind of thermostat housing you have on it thank you for your time
Thank you for all your info. I got the name and numbers for everything . And thanks for the tip on the newer Lower Radiator hose With spring. I will be upgrading my 99 XJ for a better cooling system . Cheers Steve.......
PropDuster great to hear someone taking advantage of having a trouble free cooling system man I’m happy for you
Very nicely done and explained! I like it. If you could put the name and perhaps part # of the special parts you used to improve the stock system it would be greatly appreciated! Thanks!
All the names are in the video
Was thinking of doing the zj fan clutch upgrade on my 96xj. Does anyone know what year zj fan clutch would be used?
Wish I grew how to run heater hose after I take closed system of thanks
I am putting in my 4th and final 4.6 stroker. I actually have the Hesco T-Stat housing and Flowkooler WP as well. I never had any success finding that lower coolant hose with a spring to prevent collapse. I've read that the lower the pressure in the system (which a collapsing hose would cause) the more the fluids can approach bubbling/boiling temperature, and the water pump circulation increases that by using fins to pump the water, which causes cavitation (H20 turns into HH and O, this is where the bubbles come from when you shake water in a bottle, run water full blast through the faucet, or submerge a propeller at speed into water - which is just what the WP does). Submarines need special metals in the propellers to keep them from falling apart because of the pressure differentiation from the cavitation it causes on either sides of the fins. It creates amazing low pressure, and the more your WP flows the more negative pressure you have on the bottom inlet, and the more it will collapse hoses. No one should be using that higher flowing water pump without a springed lower hose, especially with a thermostat that opens and closes in binary mode. I highly recommend you spend the extra $2 and get a premium thermostat that opens variably based on temperature, like the Gates or FelPro units on RockAuto. It's a more even flow without the drastic transitions between high and low pressure caused by open and closed operation. I just put in a set of Flex-alite pusher fans in front of the radiator and will be wiring it up today so I can push air into the fans on the other side that pull, instead of buying a bunch of fans while losing 2 that work just fine. I have a supercharger as well so I need all the additional cooling I can get. Also, if you have a 00-01 XJ, toss that dual cat setup right beside the engine. That's causing a ton of excess heat and is where the misfires and eventual cylinder head crack comes from. Get the old setup with 1 cat in the back under the carriage. That infernal setup was engineered to cause problems, along with the lower pinion angle on the front axle. Maintenance sales just weren't high enough for Jeep.
Wayne Sanders well yeah if you're making more power that's a different story but for stock this set up is top notch
Wayne Sanders I have a whole different video on exhaust...I have a 00 and gf has an 01 both had California emissions and both were swapped with zj engines and converted to federal
Wayne Sanders sorry to burst your bubble but the high pinion is from a TJ Dana 30 which Jeep had a lot of and did not want to reorder low pinion for a model that was already chopped. The cats and all the emissions garbage on the 99 and up XJs were due to increased emissions requirements to keep the 4.0 emissions compliant.
Mark Espinoza I have no idea what you are talking about because that exhaust isn’t in 99 and the high pinion was never in a tj
Flex-J Steve whatever you say Dr. Jeep. Just sharing what I know having been there and done that when these cars were still leaking oil on the showroom floor.
Good info bro I want to buy a Jeep XJ what are some things I should lookout for ? I want to make sure I buy something that won't make me feel like I wasted my money
Savage Goku simple answer....drive south look for 98-99 and spend $1,500-$3,000 the rest should be straight forward
Any more Jeep vids coming? It’s been a while!
Ed J yes I have a lot to show that I’ve done however I’m busy with school and it’s apart it the garage at the moment and has been for a month haha
Hey Steve,
Thanks for the video. One question; I got fancy new higher temp silicone hoses but without the metal coil included. Is there a way to insert a metal coil in an aftermarket lower hose?? Thanks
fastenol1 wouldn’t mess with anything besides factory
Flex-J Steve Thanks for the reply Steve. Will definitely procede with caution.
Summers get 110 degrees here, now what lol, I go through radiators like crazy
Jbird shouldn’t matter buy the right stuff no problems
I had put in a 180 thermostat , temp drop drastically and getting better mpg
All wrong
Hey where can I get the bolt for the AC compressor ?
I just happened to come across your video... I see your Jeep xj has an OR-Fab front bumper which by the way is no longer made. I think I might have bought the last one they had before OR-Fab went out of business. Yes, I have the same exact bumper on my Jeep xj. I also see that you have a winch. What I want to know is, what brand or kind of winch you have and what size is it??? I'm not sure which winch to get and by looking at yours, I thought you might be able to help with an idea. I'd very much appreciate your input.
They still make it. They shut down for a while and then they opened back up again. What you are talking about is what happened a long time ago that’s not recent at all. I have a Smittybilt x20 10k synthetic with the box relocated in the engine bay by the firewall with 2/0 wire ran for it and a 380 amp alternator.
Do a walk around video of the jeep. Looks like it's a pretty dialed set up so share it with the world
Logan Cole just about everything is besides the suspension unfortunately...that comes next summer....I do need to start making videos again though
If you have overheating problems and you are NOT hardcore crawling in 115*F weather, you just need a rebuilt stock setup. The flowkooker pump is nice but I don't have any overheating issues with a fully rebuilt factory setup, running 35" tires and doing lots of hot weather offroading. If you have a fully built buggy or something you might want to throw in an aluminum 2-core radiator (mishimoto) but they are known to crack at the welds over time, as well as a ZJ fan clutch. Almost no electric fan setup will match the flow of a belt-driven fan with the ZJ fan clutch
That said, I am running a Napa water pump and fan clutch, an OEM Mopar thermostat, and a Spectra stock replacement radiator, as well as Gates hoses, and a stant 16psi radiator cap. Works just fine for me and I always use the air conditioning.
If your AC condenser is filled with rocks, it will affect airflow to the radiator so don't overlook that. The Flowkooler pump will boost flow at idle but not that much over 2000 rpm. A thicker core radiator can help with dumping the heat out but has its own issues such as the welds usually being sub-par. A lower temp thermostat will NOT help overheating issues, and will lower your fuel efficiency, the motor should be at 210*F and should not exceed 225*F or you will risk warping the head over time.
There is alot of info on various Jeep forums so do your own research and make your own decisions based on your usage. The stock system works just fine for me
reddyuda agreeed stock set up is what I use and works as it should when maintained any type of switches or fan delete kinda stuff is purely dumb
@@flex-jsteve540 Nice looking XJ!!! I took my stock thermostat housing and ground it out to flow more. I ordered a Flowkooler water pump from Hesco and they cancelled my order themselves saying my stock water pump was already high flow. How many companies would do that!!! I got rid of my stock fan and went with a 2 speed Thunderbird fan on my 2004 TJ. Stock setup just didn't do it in the So Cal desert. I wish I would only see 90 degrees...
lakrabid I’ve been off road in 100 degree days stock set up no issues
There is no Mishimoto made in HISTORY that made it past R&D has “cracked at the welds.” Whoever told you that is an imbecile of the 12th degree.
There is no better mass-made radiator on Earth. Period.
Yes, there are a FEW racing company’s that can make an equal or better radiator, but for the masses-Mishimoto is it.
What headlight are these? They are amazing
Khalil Awad got them from headlight projectors it’s not cheap trash like $450
Cool
Where did you buy your new thermostat housing
1:40
my xj has been overheating for years, i am beginning to suspect the fan clutch is worn out. i haul trailers at 100* up mountains in the PNW
T M I mean when’s the last time you’ve changed coolant thermostat water pump fan clutch coolant temperature sensor radiator and transmission fluid?
Please give us some links to the spareparts
khndenmark whatever parts are said in the video type that in google...
Hey I’ve been trying to find factory cooling systems part but I’m having a hard time finding them. Gone to the dealerships here and they keep telling that they carry them anymore! I have a 2000 Jeep Cherokee 4.0L
Use the internet why are you going into the dealer? Go to a Mopar parts sure put your vin in get the part number and put it in google
Just bought a 06 Chevy and I ran it the other day and the temp gauge was going up in temp what do you recommend me replacing first to get it running and not over heating
Jess Augustine no idea I don’t know what it’s doing or miles or anything
Can you post a parts list for the cooling system youre running? Please sir!? 😅
They are says in the video man
Do you have the factory numbers for a 1990 jeep cherokee for the temperature reader and for hoses
luis z I do not, just go the any Mopar dealer parts website and it’ll be there when you put in your year make and model just like any other vehicle.
Please send me a detail parts list and #'s, and where to find them. Thanks
David Moyer brands of parts are in the video
Where did you find the factory lower radiator hose with the spring?
moejr14 same place you get anything else factory...Mopar
Good luck
My 2000 xj classic runs good until I start to slow down , as soon as I slow down or after a while of running the Temp. Just spikes out of no where. Can you help ? Idk if it’s a water pump issue or a thermostat
FROM Hills To DESERTS it’s 20 years old it’s past the time to replace everything
got a link for that thermostat housing
Bradley Sopko hesco
Part numbers for all this would be very helpful.
what were you having problems with finding? just give year make and model and that's it
Just listing all the parts would be good to have.
Kyle W they aren't universal parts so there should be no confusion on what to get once you simply give year make model....not to mention this was done long ago and part numbers or not you still have to go through the same steps to obtain the parts so that's just a lot of unnecessary work
I would not have even watched this video if I didn't have the exact same make, model and year vehicle as in the video. I can manage.
Kyle W that's what I like to hear....any and all shouldn't have issues getting the parts I gave the names
I have a
1994 Grand Cherokee Limited (5.2)
And I wants to lift it myself 3”
I will like to see a video of what I need to buy and how to do it
I have a xj….
@@flex-jsteve540 ok thank you
Why the high pressure cap? I've been running the stock cap for years with no leaking issues. Is there another reason to run a high pressure cap?
Hamad Mohammed when running this exact set up you have to....it's higher volume all around compared to everyone else
What are the names of the water pump, thremo housing and cap?
Papaslim's Films all in the video besides the cap don’t remember
Part number for the thermostat housing please
wade hiatt put in year make model just like any other vehicle you get parts for
What kind of led headlights? Do you have a link to them?
Khalil Awad got them from hidprojectors.com
CHECK YOUR FUEL PRESSURE. I had a weak fuel pump causing a lean running condition. Leaner mixture runs hotter. My XJ would start missing like a stormtrooper whenever I got near 210. Its kuz the fuel rail pressure was not high enough to keep the fuel from boiling. New pump, runs much cooler, and even when I have gotten it up to the line after 210, no misfire.
You’d get a cel and or notice lack of fuel pressure lol
@@flex-jsteve540 nope. My 2000 Cherokee never once threw any cel other than a p0303. Cyl 3 misfire. And that was only if I sat with it idling too long. Fuel pressure got so shitty that it would just fall on its face if I tried to throttle up at all. When I finally tested fuel pressure with a gauge rather than depressing the Schrader on the rail, she made a whopping 3 - 7 psi. New fuel pump also solved what I thought was a transmission issue, nah just turned out it couldn't supply the necessary amount of fuel.
@@TheRealMikeWilly so that’s yes not nope go back and reread
@@flex-jsteve540 cel was intermittent and would clear itself after a few drive cycles if it didn't get hot. Snap on Apollo D9 scan tool identified the problem as bad coil or bad plug. Injector was functioning as designed and there's no fuel pressure sensor, never once did it point towards the fuel pump. Lack of power was definitely noticed but was attributed to 37's on 3.55's. I've had plenty of 4.0s but never had such large tires on such a tall ratio until I picked up this one. Nevertheless, a fuel pressure test never hurts unless you spray it in your eyes and according to FSM 43 psi is the minimal pressure acceptable.
Where in the world did you get a 380amp alternator for you Jeep xj???
Virtuality any custom high output alternator company. That’s not even a lot
Wow all that to keep it running cool bro you spend a fortune on all those parts. I have a 2001 jeep Cherokee HAD the same issue all I did was flus my heater core and buy a thermostat to release the pressure at 165 now on a hot day of 109 degree weather it goes a tad bit over 210 with AC running
Kike Zombie hey bro I'm considering going 180 since its getting ready to hit the 100's in south Texas. Have you tried 180?
Mark Munoz no there’s nothing to try 195 factory is the only thing you should be using you are doing nothing but harm putting in 180
@@hectormarkmunoz no I haven't but I live in Texas as well and I had the same problem till I did the switch on the thermostat till this day it's still driving good and not heating up passed 210
Flex-J Steve dude, what are your qualifications to be giving this advice? Are you a trained mechanic?
Music Islife it’s all I do
Where you get those headlights?
Off of HID projectors
What was the brand on the thermostat housing?
Hesco
Did you have problems with the hesco thermostat housing leaking from the bottom of it? I've put on 4 blue gaskets from autozone, before I replaced the OEM thermostat housing it wasn't leaking before but now it is. I haven't checked to see if their is any cracks on the head where the thermostat housing goes on but I doubt it's cracked though. Can you give me some advice why it's leaking?
There’s only a handful of ways it’ll leak. You didn’t put the hose on all the way, it’s cracked, it’s not machined flat, you didn’t clean the surface well, you didn’t rtv both sides of the gasket, you didn’t torque correctly.
@@flex-jsteve540 Thanks for the quick reply I did put new hoses all around and their pretty tight on the connections I did clean off the surface too. About how much torque should I torque them down to.
@@nicholaschavez9383 No problem, don’t remember what it is. Give it a quick google search.
@@flex-jsteve540 Ok will do!
I can't find the radiator hose with the wire in it. I was wondering if you could point me in the right direction. Thanks.
Ed Mitchell stated right in the video...dealer
@@flex-jsteve540 where? Al I hear is “factory”
@@JustALad exactly
Hey my 1998 Jeep Cherokee shuts off and it over heats, but it has a 1996 motor in it. We are going to replace the radiation and I am watching videos on UA-cam. Can you please help me.
Make sure you didn’t do any damage....then replace whole cooling system
Do you have the website and part numbers for the thermostat housing and water pump?
Kevin Rodregez brands are said in the video
WHAT ARE THE NUMBERS ON THERMOSTAT HOUSING WATER PUMP THANK U AND @@flex-jsteve540
ted steger when you look online select your year make and model
Is the cold air intake worth the money for the xj
Aaron Simmons Aaron Simmons picking one thing is pointless...you either do full bolt ons or none of it at all
What kind of headlights are those!?! Could you send me a link to them??
jeremiah mendoza they are discontinued sorry
I think they are the STARR HID bi-xenon lights
headlightrevolution.com/starr-hid-starr-hid-xp6054b-bi-xenon-black-projector-headlights-kit-5x7-rectangular-sealed-beam/
reddyuda they are...funny you say that because I bought them a year ago from a different website and they discontinued them and just tuesday I discovered them from their actual source lol
The valve cover bolts where do you get a complete set ? part number ? Thank You
gargato1970 I didn’t say anything about the valve cover or bolts
@@flex-jsteve540 I know but I noticed your valve cover so clean I cannot find a set for my XJ I am tired of looking at the oil leaks from the valve cover.
gargato1970 it’s called washing it....that’s not even my new one either in the video....then replace your valve cover gasket I’m not understanding your issue here
@@flex-jsteve540 nevermind...
What Injectors you running? Bought some Bosch 30lb and they made my jeep run like crap lol
U need to up your fuel pressure to around 48psi run 30lb injectors
It depends on your built
Super charger install on xj
jus Bless lol I have a lot to do before I do that
Is it a good idea to take out AC condenser to flow air more easily through radiator ?
Dawood Shahrestany keep the air conditioning....you're not a slave and as stated in the video I can go out off road on 100 degree days and I have zero cooling issues
If i see too much heat I will take out Condenser,i have this car for 15 years and never use AC,
It was kind of you to reply to my question,Thank you
Dawood Shahrestany if you do the same parts and everything is clear you will have zero issues....I've done it to 3 jeeps now and if you continue to have a heating issue something is wrong....just like the guys who add 3 electric fans and stuff you would be just avoiding the problem at hand...no problem man
I take your advice,I hope see more videos soon,
Dawood Shahrestany that's good if you ever need more help feel free to ask and I'm working on it but I'm super slammed right now but soon I will be making a new video
I guess I’m just curious, 210 isn’t hot? I know guys that won’t run their cars over 140
Mac Parise 210 is too hot 140 is too cold
I'm going to do a complete rebuild of my engine In my xj it has 300,000 miles do you have any suggestions
Kendal Morris yeah literally replace everything and build a stroker while you’re already there felpro master gasket set horseshoe intake 62 mm throttle body k&n intake system bigger injectors flowkooler pump dealer radiator hoses dealer thermostat hesco housing app dealer sensors dealer radiator higher pound cap 330 amp alternator big 3 upgrade dealer injector heat shield banks header brown dog engine mounts I’m sure I’m missing more and if it’s Cali convert the entire thing to fed
Flex-J Steve s
Hi Steve...I need some advice if you can...I have a 2001 Cherokee Sport...I'm having some cooling system issues...everything is stock...I'm the winter it's fine but in the summer it gets over 210...just about to the next mark beyond 210...once it got to about 3 marks past 210...no leaks...I'm flushed it but it still "creeps up" in temperature...do you have any ideas what I can do?...many thanks...Charlie
Charlie C easy...start with how long have you had it and how many miles are on it and what you’ve replaced involving the cooling system and what brands
Flex-J Steve
Hi Steve...thanks for replying!
I've had the Jeep for about 3 years...it had a history of a cracked head which was replaced before I got it and it ran great all that time until last week...it has however always run a little on the hot side...I bought it at 139k miles and it now has 179k miles on it...one thing I just discovered...the bottom radiator hose does NOT have a spring in it...I've read and heard on a video that without that spring in the bottom hose, the hose tends to collapse and restrict the water flow...Is that true in your opinion?...and do you think that could cause the temp to rise as I drive it for longer periods at a time or fluctuates in temp depending on the outside temps??.
Flex-J Steve
Also:...I haven't replaced anything except to flush the system and change the radiator cap...16psi...it was 18psi
Charlie C it’s 17 years old with 179,000 miles on original parts man lol replace everything.....simple as that
Charlie C you should be thankful it’s lasted as long as it did lol as for me as soon as I get one I just replace everything it doesn’t matter if it’s good or bad the thing is close to 20 years old if not more and should be replaced far before that even happens
what kind of headlights do you have
Ethan Starr
What thermostat housing is that?
Richard Soto 1:45
Do you have the part number on the “crown” fan clutch
I don’t have part numbers for anything. Just enter year make and model when you look up the parts like any other vehicle.
Flex-J Steve ok thanks
What headlights are those?
Hyper_Wolf _Co Starr....just leaned that about a week ago because I originally ordered them off a different website about a year ago and they said they were discontinued but I found the original company that made them and it's starr....great headlight
The lower hose radiator where did you find it?
Ballora's Music box use factory hoses
dealer
dealer here said it is no longer available with the spring
Swords Beer Get Mishimoto upper and lower radiator hoses.
To cheap for dealer parts if I can avoid it. I never had a problem with NAPA hoses. I even forgot the spring one year and the hose never gave me a problem. Never remove the fan shroud, needed for slow traffic. Buy a cheap tester to check the antifreeze. Buy a good water pump who wants to keep changing cheap ones. Don't over tension the belts as that will also help kill the bearings in the pump. Just my two cents.
Jeep Cherokee then save the money to buy the quality parts it’s not difficult.....so you’re running a flowkooler pump? It’s all stated in the video....never said anything about removing the shroud....yeah that’s why it says flowkooler pump in the video
Sorry, post wasn't directed to you. Just I have seen so many people make these common mistakes. I just changed a radiator that developed a leak, a cheap one that I bought. The only one the parts store had at the time and I couldn't wait for a good one. lasted several years, so much for plastic. It pays to get good parts.
Jeep Cherokee yeah the factory one was $280 but it lasted 18 years and is superior flow to cheap brand
Full flow pump. Cold case wide tube 2 core alum performance rad. Stock fan setup with good shrouds. High flow housing. 2 35,000gvw trans coolers, one with fan under rear seat area other in front of condenser and trans not ran through radiator anymore. Dynatrac pr 60hd rear Dana 44 front. 4;88gears 35” tires. Lock out hubs front so save gas and wear and tear on driveline in front going down road. Trans speedo gears corrected and replaced most sensors. POS can’t wait to get above 220 and won’t stay below 210. 180 tstat checked that it works in water and can see it working with digital coolant temp gauge with sending unit in uppper rad hose. Also has a New head because shop ruined mine because thin casting doing valve job. Used felpro severe duty head gasket. my jeeps fully built and well taken care of. No rust ever on vehicle or inside cooling system.
So wtf is wrong with my 97’. Anyone know?? Came from stock system that overheated and even with trans out of it and zj fan clutch it was hot. Zj helped but took mass amounts of hp. Recently took out cat with no real difference. Actually feel flat spot mid range rpm so getting new one soon. Plus ecm prob knows cat isn’t working. Air fuel could be whack too I don’t know. Lol
Question I have a Napa temp sensor and tps sensor. Runs super smooth and drives nicer than any xj I’ve ever rode in. Just rebuilt trans and t case with max line pressure and new updated shift solenoids etc. works amazing but bitch is dying of heat. Could it be timing issue???
Maybe because of that temp sensor?? Any input would be rad.
Done 4 xj’s this way and don’t touch 210 let alone cross it....
Did you say the water pump is a “four cooler” “full cooler” or “flow cooler”?
Flow kooker but I use a hesco water pump now
Nevermind found it
Ohhh shoot I literally just ordered the flowkooler should I cancel and get the Hesco?
@@jonathanesteva4265 yeah hesco pump and housing is good stuff
@@jonathanesteva4265 yeah for sure you can’t go wrong with top shelf cooling components it’s better than replacing your whole engine which is a whole video coming to here one day lol
You have a rad cap on yours. Mine does not have a rad opening, at all.... lol 89 4.0L that’s why we customize the cooling system cause they’re not all the same. And mine.... sucks! Lol pressured resivoirs suck in general!
Just swap systems
Thinking about it but there’s none in my local yard. New parts are not as budget friendly. I’m starting with a double electric fan. Hopefully that’s enough.
Derrick local yard? Budget? Just buy new quality parts...and doing that fan crap isn’t the answer
Nice...Where did you get those headlights?
Dan Hambrick hid projectors.....they are fantastic I don't go cheap on anything they were $450 lol
You could have made them yourself, easily, for $70.
I love it when guys bolt-on stuff and don't actually build anything, then pretend they have some sort of knowledge.
JeepITguy if you don't like it move on thank you
+JeepITguy who dumped in your cheerios? i "love it" when some guy who has nothing to offer but pointless criticism pollutes a video thread with armchair knowledge.
b it's better when people say something without knowing you
What year is your jeep?
2000
What size lift and tires
Schon Mack rough trash “3 inch lift” and 31” Michelin defender ltx.....ordering a real lift tomorrow the guy before me put on this pathetic excuse of a lift
Where did you get those headlights?
Hidprojectors.com
@@flex-jsteve540 Thanks a ton 👍
@@JohnSmith-ot9sc no problem
Want kind of water pump you put on ??
Literally in the video
@@flex-jsteve540 thanks
Are you still active
Comments yes, videos I’m hoping to by or before summer.
I need the clutch fan shroud. Any advice or link where to buy one... I have a 2001 Jeep Cherokee. Straight 6, no bells and whistles.
Jason Rock literally any pull a part yard
Jason Rock Parts geek $15 brand new.
Mark Munoz cheap junk
Flex-J Steve it's a fan shroud bro not a transfer case. $15, three years later
later...I'd say that fan shroud is holding up good. Junk yards are good no doubt to find certain parts.
Mark Munoz rather have proper fitment
I have a 99 xj and on an average day driving to work 15 minutes away it will reach above 210 with the ac on and my fan never turns off, even just driving 25 minutes to town it gets up to 230 and i can never have the ac on! I’m no mechanic but if I buy the right parts on the video hopefully it will bring my temp down quite a bit and save my engine from overheating all the damn time
I don’t touch 210 let alone go over it
Where did you get the spring for the lower hose
2:40
Do you know where to find an aluminum radiator?
Brian Rodriguez only use a factory radiator
Yes, I use the Aluminum Radiators from Champion. You can find them on line. They are direct fit and have. 1/2" flow tubes.
Garry Harris factory only
I put two stock AC fans in mine and got rid of that clutch fan and mine works pretty good I just hooked them up to my ignition so they run all the time and in the winter time I will probably just pull the fuse for the one on my driver side and just run the passenger side one
Hard pass
Where did you get those lights
luke ruelas starr
Flex-J Steve star?
luke ruelas no starr
can u put links to the parts plz
NoFucks Given just give year make and model
Flex-J Steve 96 xj classic
NoFucks Given just give that to the dealer or parts store or online
Flex-J Steve 10-4 thanks
Did you change radiator? Which one?
Benne both are said in the video
@@flex-jsteve540 Alright :) you say "factory" but does that mean its from a parts jeep?
Benne means the factory one and no never
when mine starts getting hot i just open heater for a few minutes and it cools back down
then you have an issue that needs to be fixed....
Stop doggin this guy out, i have the same engine and an open thermostat. My 94 ZJ never gets above the half way mark even in rough traffic or trails in the summer. Temp always stays under the second hash mark when normal driving
The stock setup works fine but it robs power and uses fuel. Electric fans are more efficient in that regard.
So saving a nickel every gallon of gas and 5 horsepower is more important to you than a better correct higher cfm system that is not hacked together? You’re on your own
@@flex-jsteve540 well, I’m in Australia, so when it comes to fuel, it’s not so much about the cost, it’s about the distance! Some places I travel to, fuel stations can be 500kms apart! Not only that but outback fuel prices are crazy. So yes, fuel economy matters! Also, I may be carrying a lot of extra weight or towing a boat, so yes, 5hp (actually, it’s more like 10hp) actually does matter! You need to remember that not everyone’s needs are the same as yours! Oh and why would you assume that just because my cooling system isn’t stock that it’s “hacked together”? Because it’s not. It’s high quality, tried and tested and I can crawl along all day in 45 deg C heat without overheating. But whatever, you stick with your old fashioned tech if you want to…
@@officialWWM you completely had that go over your head
@@flex-jsteve540 so did you!
@@officialWWM i didn't though....your thought process is fucked
its all stock am i missing something
That’s the point….quality stock system using mostly factory parts
110k views and 500 followers unbelievable
Why is that?
What’s your front bumper?
Also, you buy your girl some tires yet lol
Jbird or-fab and yeah she has Michelin defender ltx tires
Flex-J Steve thanks dude I’ll check it out
Jbird hood vents Mopar radiator Mopar thermostat hesco water pump hesco thermostat housing Mopar temp sensor zj fan clutch
Flex-J Steve I’ll look into it bud thanks for your time.
It will be 110 degrees here Saturday, my xj is pissed
Jbird zero reason for it to be
Flex-J Steve I’m stop and go with this thing all day. When I’m stuck sitting with the ac on and over 100 outside it starts to creep to 220 till I drive again.
@@jdssurf fix the issue then.....
Flex-J Steve well, in your video, you say there is nothing wrong with the cooling system in these jeeps, but then you talk about upgrading your pump and housing and stuff. My stuffs all new stock parts, and still wants to run hot, so my point is, when you say the cooling system on these are good, I’m not buying it, if it was, you wouldn’t have done the upgrades. If I recall, you said there’s nothing wrong with these cooling systems......
Jbird yes there is nothing wrong with the stock system at all....the concept is going over your head and you’re not comprehending it....you are just setting yourself up for failure here like everyone else with that “stock part” garbage
Get some bigger tires on your girls Jeep stat
Ron Ulysses Swanson those are just her street tires....she has different tires she swaps on for mud as do I....she will be getting new street tires here in a month or two
flush your systems, y'all
I don’t even see how that needs to even be brought up. That’s like saying wipe your ass after you shit.