Synergy Ford Super Duty HD Track Bar Installation Video
Вставка
- Опубліковано 14 жов 2024
- Follow us along as we show you how to install your new Super Duty HD Adjustable Track Bar. This install video will show you step by step on how to correctly adjust, install and center your front axle.
For Instructions visit us here:
www.synergymfg...
#synergymfg #fordsuperduty #ford #superduty #install #trackbar #adjustable #f250 #f350 #f450 #f550 #heavyduty #fordperformance #madeintheusa
😊Great Tips. 2016 F250
Easy Install!
So if the snap ring fails, there goes everything. I can not rely on the snap ring alone.
The Adapter Slug is pressed in just like the stock Rod End and for most cases this press fit is what is doing the retaining. We have seen that this hole gets beaten up from multiple installations of the Rod End, so we included a snap ring as a redundant back-up to the press fit for peace of mind in case your hole has been wallowed out from multiple Rod End installations. The snap ring is rated 19,200 lbs thrust. If you apply that much force onto the track bar you are either bottoming out on it and need to adjust your bump stops/interference, or have been in a nasty accident.
@@synergymfg so purely theoretical here but what it’s someone was to weld that adapter to the axle housing? Rather than just running the snap ring? Like maybe the hole is so damaged that it doesn’t press in with much force or minimal engagement, could that have some potential?
@@bemcampbell87 Ya, both the steel that the adapter slug is made from and the axle side forging are both compatible to be welded. We generally make our parts bolt in, but in this case bolt and weld is acceptable
Do the joints come pre greased?
Yes. Every joint we sell comes pre greased