Transistor Tester and LCR Meter in One BSIDE ESR02 Pro
Вставка
- Опубліковано 26 сер 2024
- #ErCanEverything #BSIDE #TransistorTester
📌In this video I show you a unique Transistor Tester and LCR Meter in one small compact device, BSIDE ESR02 Pro
🙌It is so easy to use that anyone can work with this device without difficulty
📌BSIDE ESR02 Pro Order Link:👉 s.click.aliexp...
📌BSIDE Official Store:👉 a.aliexpress.c...
👇Subscribe to my Channel👇
/ ercaneverything
TikTok👉 / ercaneverything
Facebook👉 ercaneve...
Instagram👉 / ercaneverything
Twitter👉 / ercaneverything
Descriptions:
This meter is a small tool for the engineer, electronic maintenance and factory. It is very easy to test plug-in and SMD devices, it can also test different kinds of diodes, triodes, thyristors, MOSFET, enable to analysis the device type, the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.
Notes:
Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit.
If using DC power supply, please choose DC 9V - 12V adapter (including 9V and 12V)
It is powered by 1pcs of 9V 6LR61 battery, when the battery power is under 6V, please replace it with a new one.
Parameters:
Resistor: 0 - 50M ohm Resolution: 0.01 ohm
Capacitor: 25pF - 100mF Resolution: 1pF
Inductor: 0.01mH - 20H Resolution: 0.01mH
Capacitor ESR: 2uF-50mF Resolution: 0.01 ohm
How to use instructions:
Push "POWER / TEST" to power on and start a test, multiple measurements can be repeated by this key, auto power off 20 seconds after measurement.
Provide three kinds of socket, each socket pin 1, pin 2 and pin 3 are connected.
There is a table "typical ESR value of electrolytic capacitor" at the back, it is for guiding only, these are typical value for standard grade electrolytic capacitor at room temperature.
Calibration:
Short the test pin 1, 2, 3 together and push "POWER / TEST" button, then the screen prompts to enter calibration, push the button again within 2 seconds to confirm.
Few seconds latter the screen prompts to release pin 1, 2, 3, release them and wait for calibration finish.
Package Weight: 0.25 kg.
Package Size(L x W x H): 17.50 x 10.00 x 6.00
cm / 6.89 x 3.94 x 2.36 inches.
Благодаря ти Еркан!
It got all the components you throw on. Very good! Hats down 👏
Thank you Brother🙂🤝🤝🤝
It is pretty good, just remember to discharge your caps first especially if they are high voltage... or find out the hard way like I did :(
Don King like hair-do? =)
Thanks, I was wondering how practical the SMD pad is before buying, looks easy!
If you're working with SMD components, these pads are in must have group.
Seemed like it is a pretty solid tester! One thing I noticed; the 123=ECB on the display seemed a bit redundant since the actual diagram included both anyhow.
Seemed he get much money for this shit ,i had one and nothing worked after calibration ...workded but fantasy values
it's in the order of the contact pads when you're looking at the device. redundant, but a nice touch that saves a lot of mental strain preventing confusion, especially when testing a lot of components.
Watching your video sir wow very nice tester its easy to test components
Really is a very good component tester and most importantly there is no polarity requirement. Automatically captures everything🙂
Watching ;)
1:16
Hi!
Section 4/g of the user manual deals with the Selection Menu. According to the description the device can generate frequencies up to 2MHz. It can also generate a PWM signal (I can't read the frequency) with duty cycle between 1% and 99%.
Have you tested whether these function really work on this device?
I have the same but NEVER is written ESR=xx, it makes a lot but NOT measuring ESR. What is wrong??
Is it able to make in-circuit capacitor testing?
Wow nice review
Thank you I'm glad you liked it🙂
Nice 👍👍👍
Thank you Bro🙂
When measuring transistors,is it showing the gain as "B" for beta?
Please how do I know if the transistor is bad or good using this tester since the video is just about measurement thanks
Does it test triacs?
discarge capacitor max50v ?
What happens on 8:55? No more testing ESR??? What is this?
Non-electrolytic capacitors have insignificant ESR. Most likely below detection threshold for this meter.
ir of battery capability?? Please any info👌
I couldn't understand what you meant?
@@ErCanEverything sorry, internal resistance can be read from this machine?
@@stevepr100 There is no such function, but this battery charger can measure the internal resistance of batteries.
ua-cam.com/video/luBNJ_5oGQM/v-deo.html
Круто вітаю з новою технікою 👍🏻👍🏻👍🏻
Thank you my Friend🙂🤝🤝🤝
I bought this because the other lcr tcx versions were reported having fake chip.
Hi I have the same tester as yours, it does not read me the transistors. He tells me there is a calibration problem. How can I solve?
I'll check later if I can help you with anything?🤔
ESR02 pro can testing igbt?
Yes it can👍
Thank you
बार बार रिसेट करना सही नहीं है मेरी नज़र में यह मल्टीमीटर फेल है इसमें टेक्निशियन का बहुत टाइम वेस्ट होगा और वह इरिटेट हो जाएगा।
This device is easy to use but very unreliable, inefficient and flimsy. You be lucky if it lasts a few months.
Зачем так ролик тормозить? На 2х приходиться смотреть.
It does not have the V.loss for the capacitors..... so, 👎👎👎
If you had looked more closely before the comment, you would have seen that it has a V loss...
@@thomass7877 you could just say: yes there is. You talk too much
Oh.. did I hurt your feelings.. I'm sorry...@@paolorecchia2714