Finally a tutorial that’s HONEST about Gundam Markers! So many Gunpla snobs turn their nose at Gundam Markers and make it very hard for beginners to understand it’s okay to use them
Hi, this is an amazing job ! I'm starting myself in the hobby and i have a question to ask. May be it's obvious for you guys but not for me... I use gundam markers and tamiya accent panel line. As it shown on the video, can i easily remove the accent color (black) without removing the marker ink underneath ? If I do so, will not i remove both ?
Great tutorial! I have a few questions though; 1) Will any lacquer thinner work for thinning gunpla marker? 2) Where do you put your brush while waiting for the paint to dry? Water?
Hello, I tried to do the painting of the claws with the tamiya x-8 paintings and it has not been as in your video, you have any recommendation to use these paintings correctly, I am new to the subject of gunplas.
Make more stylish video please. I love your stylish video so much and your tutorial too. I'm new to gunpla and i learn a lot from your videos. Thank you!
Dennis Liew I think his tutorials are great. Just know that he builds, paints, etc in his own *style* (heh), but it isn't the only way to do things. You can do all of that with what you think is best. If you are new to GunPla, you don't have to paint kits. Start with with learning and experiencing how to cut parts and clean parts first. Then Worry about putting on stickers correctly & panel lining. Then if you're more confident and used to GunPla, try things like dry transfer decal, water slide decal, using paint/Gundam Marker/air brushing. You don't have to make all model kits look amazing. Just do what you can with the tools, money, and time you have and just enjoy it as much as possible. =)
Old video. But are you still answering questions, what did you use when you panel lined the hands, Black Gundam marker too, if so why did it look runnier than the yellow, did you thin it, or is it something else?
dk Y 네 맞습니다 하지만 락카신나에는 결국 다 녹구요 도료자체는 락카인데 희석할때 알콜을 쓰면 앙금이 생겨 사용을 못하게 됩니다^^ 세척이나 지울때는 알콜을 사용해도 무관합니다. 아마 알콜성 이라는건 악취때문에 기본적으로 알콜로 희석되있는거 같아요 대중적으로 사용을 위한 배려인듯?? 건조후에는 결국 락카와 동일해집니다 :)
제대로 설명하자면 아크릴 계열이 맞습니다. 아마도 마커의 특성상 도료가 굳는걸 방지하기 위해 다른 첨가제가 섞여서 그런거로 파악됩니다. 그리고 아크릴은 건조가 되는경우 아크릴 신너에 녹지가 않습니다. 때문에 락카 신너를 이용하는게 더 용이 한것뿐이지 원래 마커가 락카 계열의 도료는 아닙니다.
I can answer this if you're still wondering. Isopropyl Alcohol works so sometimes I tend to use hand sanitizer for itif I don't have the actual bottle of it at hand.
I highly advise not to use gundam markers for painting, and I also highly advise to prime your models. Imagine painting on lego bricks, sooner or later that paint is going to fall right off if you pick the model up in the wrong way. Priming gives the base coat something to stick to allowing for your paint to have a lot better of a foundation on the plastic. Another issue with his painting technique is that he is using too big of brushes, too thick of coats, and cleaning up mistakes unneccesarily. The issue is, is that you won't always be able to clean up like he did at 2:30
I also recommend using Acrylics as it is water based and if you plan on painting your models a lot through your life, it's a lot better for your health as Enamel paints release unneccesary fumes. Advice from a fulltime model painter, not just gunpla.
Hello!! Thanks for your excellent tutorial. What gundam marker colour have you used? Gold or yellow? Could you tell me what type of marker is please? There are a lot of them and is complicated to find it. Thanks!
지금까지 건담마커 도료가 소독용 알콜에 잘 녹길래 소독용 알콜에 희석해서 사용했었는데 알고보니 락카계 도료라서 보통은 희석시 락카 신너를 사용한다구요? 그대로 계속 알코올을 사용해도 도료 사용에 문제는 없는걸까요? 냄새도 덜하고 훠얼씬 싼 약국 소독용 알코올 사용에 단점이 있다면 그래도 바꾸려구요ㅠㅠ
알콜로 사용하셔도 큰 문제는 없습니다~ 다만 락카신나가 건조가 조금더 빠르고 도료를 조금더 잘 녹인다는 장점이 있을뿐 입니다 ~ 알콜의 경우 희석량이 묽어지면 도료에 앙금이 생기는 특이한 현상이 종종 있는데 저도 알콜써봐서 아는데 큰 문제는 없습니당~ 저의 판단으로는 건담마카라는놈은 수성과 유성의 중간 느낌이 좀 강합니다. 그래서 도색을 하다보면 컬러가 지혼자 막 2개의 층으로 분리되고 색도 막 변하고 암튼 넖은면적 붓도색으로는 정말 추천드리지 않는 놈입니다;;; 얇게 칠하기도 힘든 놈이죠;;;
I recommend you watch tank painting tutorials as the techniques here are A 100 TIMES BETTER, then a lot of these gunpla youtubers. Same concept, paint, apply wash (or "panel-line") issue is, he missed a lot of stuff, he didn't prime, his cleaning mistakes that do not have to be made, there are a lot of issues here.
잘 봤습니다.^^ 건프라 만들때 도움 됨니다. 다음에는 붓도색 하고 붓 세척 한는법을 알려 주세요.^^ 제발(특히 건담마커 붓도색 하고 세척 하는법은 꼭 가르쳐 주세요.) 그리고 질문이 있습니다. 영상에 나온는 도구중에 LACQUER이 모에요? 재가 영어를 몰라서 질문 합니다.
whoa whoa whoa I'm freaking the heck out about that panel line job. So is there a base difference between the panel line accent color you used and the paint you used? In my experience something like this would have made a dark mark on the yellow paint. Is it a super special kind of substance that dries super slow? I must know this will save me so many hours!!!
the gundam marker is lacquer based, and panel line accent color is enamel. If you paint over a dark surface with a bright color and the color seem a bit dark you can use his technique by using flat white as the base before you put the bright color.
Vensky, this guy doesn't seem to be the best at painting. The sad thing is to be a proper model painter you need experience on both ends, not just gunpla. Here's how it should go down, always prime your gunpla as most model kits do not need priming, but gunpla plastic is super slippery, imagine painting on lego bricks. It's a lot easier to take off paint that way. Priming gives a foundation for the base layers. Typically if you are going for darker colours prime with grey or black. If you are going for bright, prime with white. You can hand prime or spray, I recommend airbrushing but if you can't do that get a can of model primer white. Normal paint is shit for models. Do not apply coats as thick as this guy, I also recommend acrylic paints as you only need to thin with water and they are a ton healthier for you to breathe. The difference for the light on dark is because it can tone down that colour, leading it to be a dark red rather than if you wanted it to be a light red. Where as just having the piece primed white will keep that light red light. You know what I mean? Enough about priming, about panel lining. If you use what is called a "wash" it helps immensely. Over in Asia it is common to use gundam markers because they do not have the amount of washes we have over here in the West. I recommend using vallejo and such
Can i use alcohol as alternative? does the gundam marker will not rub off? after using gundam marker? btw I'm using pour type marker for panel lining. thanks in advance for the help. im always watching you vids and style ^_^
Finally a tutorial that’s HONEST about Gundam Markers! So many Gunpla snobs turn their nose at Gundam Markers and make it very hard for beginners to understand it’s okay to use them
Damn gunpla builder also have elitist? 😞
@@ThatllbeGreat1 yes, nipper elitist, nub removing methods elitist, painting elitist
Also finally someone who doesn’t use Tamils panel liner so cleanly
건담홀릭이 건담/프라자체를 알아가기 좋은채널이라면 벙커프라는 그프라모델을 조립하는 테크닉을 알기 좋은곳 같음
저는 꼼수 대잔치 랄까요? ㅎ_ㅎ/
Hi, this is an amazing job ! I'm starting myself in the hobby and i have a question to ask. May be it's obvious for you guys but not for me... I use gundam markers and tamiya accent panel line. As it shown on the video, can i easily remove the accent color (black) without removing the marker ink underneath ? If I do so, will not i remove both ?
Please use enamel thinner. Available. :)
Bro, your videos have helped me so much with my gunpla. Thank you from the US!
정말 매번 알고잇지만서도 붓도색 정말잘하셔서 부러워요... 저도 무등급칠하다가 눈빠질뻔하고 약간 손이 뮤엇인가 집중해서 하려하면 급수전증이 생겨서 고생햇는데ㅠㅠ
그러게요 집중력도 그렇지만 시간도 마스킹하기는 더 귀찮아서 에어브러시 쓰는거보다는 편한거같아요 ㅋㅋㅋ
와 붓을 이용해서 저렇게 깔끔하게.. 도색하시는게 더 신기하네여 대박
Great tutorial! I have a few questions though; 1) Will any lacquer thinner work for thinning gunpla marker? 2) Where do you put your brush while waiting for the paint to dry? Water?
1) Yes 2) Wash with dedicated thinner :)
@@ilsanninja thanks so much! Had quite a bit of trouble since the drying time for the marker is so quick 😆
Some nice painting methods with a Gundam marker.
how did he clean up the paint after? I saw he had yellow on some other parts of the finger not just the nails.
Thinner
Scrape using knife
I watched your tutorial because my lupus rex will be shipped out next week :))
이런 팁들 머무 좋아요 오늘 당장 사야겠어요 근데 붓 어디꺼가 좋을까요??
xxnike629xx 밖에서 영상보다보니 오타입니당^.^ 너무 감사합니당~~
세오하야토 👍
붓은 그냥 타미야꺼 사는게 편합니다~
세오하야토 BUNKER PLA 타미야 붓이 좋아용~
세오하야토 BUNKER PLA 私はタミヤの絵筆を好きです。
Hello, I tried to do the painting of the claws with the tamiya x-8 paintings and it has not been as in your video, you have any recommendation to use these paintings correctly, I am new to the subject of gunplas.
You can do it well :)
Make more stylish video please. I love your stylish video so much and your tutorial too. I'm new to gunpla and i learn a lot from your videos. Thank you!
Dennis Liew I think his tutorials are great. Just know that he builds, paints, etc in his own *style* (heh), but it isn't the only way to do things. You can do all of that with what you think is best. If you are new to GunPla, you don't have to paint kits. Start with with learning and experiencing how to cut parts and clean parts first. Then Worry about putting on stickers correctly & panel lining. Then if you're more confident and used to GunPla, try things like dry transfer decal, water slide decal, using paint/Gundam Marker/air brushing.
You don't have to make all model kits look amazing. Just do what you can with the tools, money, and time you have and just enjoy it as much as possible. =)
Thank you!
BUNKER PLA 천만에용~ 😌
이 건프라 제품의 이름은 '발바토스 루푸스 렉스'입니다.
저도 이런 팁들을 본받아야겠네요
Can i spray on tamiya surface primer and hand paint using this method?
좋은 영상 감사합니다! 앞으로도 잘 보겠습니다!
와 감사 합니다 하나 하나씩 배우게되네요
I’m going to use the Gundam Metallic Marker set, do I need to put a coating over it or no?
I’m pretty sure most gundam markers are the same and you should put a coat over just in case
이런 테크닉 강좌 너무 좋아요 ㅠㅠ
오늘도 유익한 영상 잘 보고 갑니다!
Old video. But are you still answering questions, what did you use when you panel lined the hands, Black Gundam marker too, if so why did it look runnier than the yellow, did you thin it, or is it something else?
So no primer needed?? Also did you wash your parts??
흰색도료가 서페이서 역할을 하는거군요 꿀팁 배워갑니다 감사합니다
조태현 죄송하지만 서페이서가 무슨 역할을 하나요?
현지윤 도색을 할때 밑색이 안드러나게 뿌리는 스프레이나 도료를 뜻합니다
조태현 아 감사합니다!!
살짝 다르긴 해요. 흰색은 사실 발색을 위해서 바른거지만 사실 정석으로 가면 서페이서가 표면처리랑 페인트의 안착을 위해 뿌린답니다~ 서페이서의 성분이 바로 녹인 퍼티 거든요 :)
노란색위에 페널라인 먹선넣으시고 면봉으로 닦으실때 뭐 뭍혀서 닦으신건가요?
Where can I get those little glass bottles you use for your thinner?
Can i know how long it will takes to dry by using hair dryer and also how long it will takes to dry if we dont use hair dryer?
Hair dryer use 30 seconds, normal 1 hour
건담마커는 신나 계열이 아니라 알콜성계열입니다. 그래서 평소 쓰는신나론 빡빡 문질러야 지워야 지워집니다.
보통 마커지우실땐 마커지우게,약국의 소독용 알콜,에탄올로도 지워집니다.
동영상의 패널라인 액센트 지우실때도 먹선부위만 지워지고 도색 부분만 남은것도 그 이유중 하나입니다.
(패널=신너 도색= 마커=알콜계)
dk Y 네 맞습니다 하지만 락카신나에는 결국 다 녹구요 도료자체는 락카인데 희석할때 알콜을 쓰면 앙금이 생겨 사용을 못하게 됩니다^^ 세척이나 지울때는 알콜을 사용해도 무관합니다. 아마 알콜성 이라는건 악취때문에 기본적으로 알콜로 희석되있는거 같아요 대중적으로 사용을 위한 배려인듯?? 건조후에는 결국 락카와 동일해집니다 :)
dk Y 저도 이부분이 헛갈려서 실험을 해보니 락카도색위에 건담마카를 계속붓질하면 락카가 다 녹아버리더군요?? 조금 신기한건 일반락카가 에나멜신너에는 안녹지만 알콜에는 녹는다는점이죠. 결론은 건담마커를 희석할때는 반듯이 신너락카를 사용해야합니다 :)
BUNKER PLA 희석할땐 그렇군요 . 그점에선 몰랐네요. 좋은정보감사합니다!
제대로 설명하자면 아크릴 계열이 맞습니다.
아마도 마커의 특성상 도료가 굳는걸 방지하기 위해 다른 첨가제가 섞여서 그런거로 파악됩니다.
그리고 아크릴은 건조가 되는경우 아크릴 신너에 녹지가 않습니다.
때문에 락카 신너를 이용하는게 더 용이 한것뿐이지 원래 마커가 락카 계열의 도료는 아닙니다.
dongha lee 그러고보니 마커성분표에 아크릴이라고 작게 써있던데 그럼 아크릴을 알콜과 섞어놓은것이 건담마카인가보네요 복잡하군요;
번커프라님 감사합니다
Can i you the one which uses for cleaning nail to clean panel line
no~
@@ilsanninja ok
To clean up the panel line did you use alcohol or something similar?
The paints used in panel lines are usually enamel base, like those from tamiya, to clean them, use an enamel thinner like the mr. Color thinner 110.
@@impulseregelia7490 the enamel thinner won’t take off the paint under the panel line?
도색후 먹선시 사용하시는 지우개는 무엇인가요? 도색 같이 안지워지나요?
what kind of paint dish is that and is it easy to clean?
쓰고남은 마커도료는 그렇다치고 작업이후 붓세척이랑 도료접시세척에 결국 락카신너 꽤필요할거같은데.. ㅠㅠ 돈도 돈이고 에나멜신너대신 라이터기름쓰듯이 락카신너 싼 대용품은 없을까요 그리고 전 페널라인 지울때 라이터기름쓰는데 라이터기름은 락카도료도 조금 녹이죠? 그때문에 워싱할땐 꼭 모형용 에나멜신너 사용해야하죠??
락카신너 대용품은 없습니다. 그리고 에나멜 전용 신나도 락카를 녹이긴합니다. 아주 살짝이지만. 저도 10년넘게 라이타 기름만 사용하다 최근 전용 신나를 사용하는데 별반차이는 잘 모르겠어요. 아마 라이타 기름이 좀더 독할꺼에요.
On the hands you panel lined what did you use to clean it up ?
Enamel thinner
락카신너 말고 아크릴 신너는 되나요?
what kind of thinner was used for cleaning up the panel line accent?
I can answer this if you're still wondering. Isopropyl Alcohol works so sometimes I tend to use hand sanitizer for itif I don't have the actual bottle of it at hand.
I highly advise not to use gundam markers for painting, and I also highly advise to prime your models. Imagine painting on lego bricks, sooner or later that paint is going to fall right off if you pick the model up in the wrong way. Priming gives the base coat something to stick to allowing for your paint to have a lot better of a foundation on the plastic. Another issue with his painting technique is that he is using too big of brushes, too thick of coats, and cleaning up mistakes unneccesarily. The issue is, is that you won't always be able to clean up like he did at 2:30
I also recommend using Acrylics as it is water based and if you plan on painting your models a lot through your life, it's a lot better for your health as Enamel paints release unneccesary fumes. Advice from a fulltime model painter, not just gunpla.
PEPE LE NORMIE what do you prime with?
so i can use any rubbing alcohol ? that is common in the market?
영상 항상 잘보고있습니다~^^
건담 마커로 붓도색 하셨잔아요 ㅋㅋ 그런대 렉스 손톱 먹선 지우는 신너는 어떤 신너인가요 에나멜 신너인가요??
네 에나멜 신나만 사용합니다~
Hey Bunkerpla,did you use thinner for Mr Color Flat White? If so,what thinner did you use?
Use only thinner lacquer.
와 이런 건담마커 자주쓰는데 이런점도 몰랐네요ㅜㅜ
감사합니다.
아 한가지 궁금한게하나 있는데
마커로 칠한다음 패액흘려주고 신너로 지우면 마커는 안지워지고 패액만 지워는건가요?
영상 초반에 나왔듯이 마커도 기본적으로는 락카계라 애나맬 신너에 그렇게 쉽게 녹지는 않을겁니다.
마커 지우게보다 락카 신너를 구매해서 사용하는게 더 유용하군요
드라이는 신의 한수!!!
발바토스 루프스 렉스 방금 조립다했는데 이걸 보니 칠해보고 싶네요....건담 이제 막 입문한 사람이 하기엔 좀 어려울려나....
What kind of lacquer thinner are you using? And what is the ratio?
깔☆끔☆정☆석
발바 렉스 도색하려 하는데 옐로우로 하는게 나을가요 아님 골드로 할까요 렉스랑 마카랑 따로 사야해서 분해해서 도색을 하려하는데 분해가 잘 안되더라고요
5:52 먹선 타미야 패널라이너 쓰시는거 같은데 먹선 지울때 에너맬신너 쓰시는 건가요?
2:34 여기사 패널라인 지우실때 건담마커 지우개로 하시나요? 그러면 도색한 곳도 같이 지워지지않나요?
노랑색은 락카(건담마커) 검은선은 애나멜입니당~
Lol maka, I just got this kit and did what u did, thx for the tips man
good!
사장님 건담마카 수정할때는 에나멜신너를 사용해야하나요 락카신너를 사용해야하나요?? 마커 도료는 락커계열인가요 에나멜 계열인가요??마커 도료는 에나멜신너에 녹지않나요??
락카신너와 알콜에만 녹구요 락커신너 쓰시는게 가장 확실합니다 악취가 걱정되시면 소독용 알콜을 쓰세요 ~
먹선 지울때는 뭐가 제일좋나요? 면봉은 뽀족한거 쓰는게 좋을까요?
아무면봉 다 좋아요^^ 뽀족이는 작은 부분 지울때 좋습니다
Can you use the mr color thinner to melt the paint
Hello!! Thanks for your excellent tutorial. What gundam marker colour have you used? Gold or yellow? Could you tell me what type of marker is please? There are a lot of them and is complicated to find it. Thanks!
붓같은 경우엔 색깔마다 다른 붓을 준비해야하나요? 아니면 한 붓을 씻고 다시 쓰는 방식으로 하나요?
그냥 하나로 다 하고있습니다. 잘 빨아야죠~
Can I use any kind of lacquer for my Gunpla or do you recommend that I buy a certain type of lacquer
Mr. hobby products are recommended. :)
궁금한게 접시 세척과 화면의 붉은 파츠에 다른색이 아닌 흰색을 사용하고자 할때는 여러번 칠하는건가요 ?
지금까지 건담마커 도료가 소독용 알콜에 잘 녹길래 소독용 알콜에 희석해서 사용했었는데 알고보니 락카계 도료라서 보통은 희석시 락카 신너를 사용한다구요?
그대로 계속 알코올을 사용해도 도료 사용에 문제는 없는걸까요?
냄새도 덜하고 훠얼씬 싼 약국 소독용 알코올 사용에 단점이 있다면 그래도 바꾸려구요ㅠㅠ
알콜로 사용하셔도 큰 문제는 없습니다~ 다만 락카신나가 건조가 조금더 빠르고 도료를 조금더 잘 녹인다는 장점이 있을뿐 입니다 ~ 알콜의 경우 희석량이 묽어지면 도료에 앙금이 생기는 특이한 현상이 종종 있는데 저도 알콜써봐서 아는데 큰 문제는 없습니당~ 저의 판단으로는 건담마카라는놈은 수성과 유성의 중간 느낌이 좀 강합니다. 그래서 도색을 하다보면 컬러가 지혼자 막 2개의 층으로 분리되고 색도 막 변하고 암튼 넖은면적 붓도색으로는 정말 추천드리지 않는 놈입니다;;; 얇게 칠하기도 힘든 놈이죠;;;
@@ilsanninja 빠르고 시원시원한 답변 감사드립니다! 묵은 궁금증이 풀린 느낌이네요
I’ve been using the markers the wrong way!?😱🤭😅
궁금한게 있습니다
손부분 칠할때 세번을 덧칠하게되어
좋지않다고 하셨고
그런 불상사를 피하기위해 베이스로 흰색을 올리면
한번에 할 수 있다고 하셨는데~
흰색도 두번 덧칠하고 그 위에 노란색 한번이니까
결국 세번 덧칠 똑같은거 아닌가요~ 'ㅁ' ?
보노 보노 손톱부분은 자꾸 검정이 보여서 엄청 신경쓰면서 칠했지만, 발톱은 부담없이 칠하게되는 차이가 있지요 사실발톱흰색은 한번만 칠해도 됩니다:)
BUNKER PLA 아하~잘 알겠습니다^^ 답변 감사합니다!
Thank you.
I recommend you watch tank painting tutorials as the techniques here are A 100 TIMES BETTER, then a lot of these gunpla youtubers. Same concept, paint, apply wash (or "panel-line") issue is, he missed a lot of stuff, he didn't prime, his cleaning mistakes that do not have to be made, there are a lot of issues here.
How did he melt the paint ?
건담마커 사용시 무광처리하고 하시는건가요 아니면 사포질후 하시는건가요?
사포질후에 하죵~
오 벙커프라님 이번영상은 자막을 넣으셨네요:D
영어를 하는 뷰어가 많기 때문입니다.
많은 사람들에게 매우 도움이됩니다.
thanks bro 😉
thank you~
so Damm cool!!!!!
your videos are awesome!
How long do we wait for it to dry between coats?
About an hour. But it depends :)
패널라인엑센트는 뭘로 지우신건가요? 항상 영상시청하면서 대리만족하는중인데 이거보니까 도색 엄청하고싶네요 ㅎ
High Bear 패널라인엑센트는 *띠너 (thinner)* 로 지우신 거요.
옻칠/래커 (Lacquer) ... 에나멜 (Enamel) ... 아크릴릭 (Acrylic).
그 세가지 띠너 (thinner) 하고 페인트 (paint) 종류 가 있습니다.
xxnike629xx 신너아닌가요 띠너라고 치면 이분 구매못하실듯
박정재 띠너라 하시길래 아~ 신너말이구나 하고 알았습니다 ㅎ
그런데 신나로 지우면 마커팬으로 도색한건 안지워지나요?
에나멜 신너랑 락카 신너랑 종류가 2가지 있는데 마커는 락카신너 페널라인엑센트는 에나멜 입니다
마커지우실거면 3000원짜리 마커지우개 쓰심되고 에나멜신너는 흔하니까 ㅎ 뭐 알아서
와 한국말 잘하는군요 편하군요!~
I've been using markers wrong this whole time D:
잘 봤습니다.^^
건프라 만들때 도움 됨니다.
다음에는 붓도색 하고 붓 세척 한는법을 알려 주세요.^^
제발(특히 건담마커 붓도색 하고 세척 하는법은 꼭 가르쳐 주세요.)
그리고 질문이 있습니다.
영상에 나온는 도구중에 LACQUER이 모에요?
재가 영어를 몰라서 질문 합니다.
김권우 신너 입니다.
건프라 만들때 쓰는 그 신너에요?
붓빠는법은 제 테크닉 영상을 참고하시구요 마커의 경우 락커신너를 사용해도 되지만 세척할때는 소독용 알콜을 사용하셔도 좋습니다. 악취도 없고. LACQUER 락카신나를 말하는겁니다:)
BUNKER PLA 감사합니다.^^
wow! 정말 유익하내요!
한수 배워갑니다
is that pour type marker? because my yellow gundam marker can't be poured that much into paint tray
Press and hold the end of the tip to drain. :)
Can i ask u a question
Can we use gundam marker for other figure like shf, mafex,...?
It cannot be used for rubber figures. :)
Tks ;)))
건담 비다르랑 키마리스 비다르도 리뷰 해주시면 감사하겠습니다.
2:39 혹시 뭐 뭍혀서 닦으시는 건가요?
에나멜 신너 입니다
노란색으로 도색한후 검은색으로 먹선넣으시고 면봉으로 지울때 왜 노란색이 같이 안지워지나요? 뭘 사용한거죠? 초보라 잘모르겠습니다
건담마커 위에 에나멜 도료는 서로 영향을 주지않습니다. ^^
@@ilsanninja 감사합니다.혹시 반대로 에나멜도색후 건담먹선펜도 똑같이 영향을 주지않나요?
와 속이 다 편해지네ㄷㄷ
그런데 그 도구들은 머임...?
먹선 넣으실때 그냥 툭툭 찍어두고 조금 있다가 면봉으로만 지우면 되나요?
에나멜신나로 지우세요~
그냥 마커로 그대로 도색 해도 되나요?
혹시 락카신너 뭐 사용하시나요?
건담마커가 락카계엿군요,. 붓자국 없이 칠하시는거 배우고싶네요 ㅎ
알콜계라고 하지만 그냥 무시하고 락카로 하시는게 편합니다. 알콜계지만 알콜로 희석하면 망치거든요. ㅋㅋㅋㅋ 락카 신나로 희석해서 칠하면 붓자국이 덜합니다~
great video! but gundam markers are enamel right? i wonder how you can clean the panel line with enamel thinner without washing off the yellow paint?
The Gundam marker is a lacquer paint. :)
건담마커위에 먹선지우실때 에나멜신너로 지우신거죠?
네 맞습니다 :)
I did this and I failed really hard. I need more practice.
Did you use primer?
no~
마커 칠하고 먹선 넣고 신너로 지워도 마커는 안지워지나요? 신기하네..
도색하고나서 마감제 뿌리면 더 좋나요?
is that we need to do twice the first one and then we need to wait then the second one?
Paint twice will make the color clear.
Does mr hobby mr color thinner work as a lacquer?
And some sort of primer?
It is not a primer.
Mr. color lacquer thinner is used.
@@ilsanninja mr color thinner? and how do you sand limited clears
?????? Sorry I can not understand :)
What kind of paint are the gundam markers?
hi, can i use the tamiya x20 thinner for mixing it to the marker?
Use Tamiya Lacquer Thinner
그럼 건담 마커로 붓도색하면 어떤 신나 써야해요?
Have we mix Gundam marker with lacquer thinner?
yes :)
whoa whoa whoa I'm freaking the heck out about that panel line job. So is there a base difference between the panel line accent color you used and the paint you used? In my experience something like this would have made a dark mark on the yellow paint. Is it a super special kind of substance that dries super slow? I must know this will save me so many hours!!!
the gundam marker is lacquer based, and panel line accent color is enamel. If you paint over a dark surface with a bright color and the color seem a bit dark you can use his technique by using flat white as the base before you put the bright color.
gerardray123 but here he doesn't use a white coat. so the two different types of paint don't dry into each other as easily or something?
Vensky, this guy doesn't seem to be the best at painting. The sad thing is to be a proper model painter you need experience on both ends, not just gunpla. Here's how it should go down, always prime your gunpla as most model kits do not need priming, but gunpla plastic is super slippery, imagine painting on lego bricks. It's a lot easier to take off paint that way. Priming gives a foundation for the base layers. Typically if you are going for darker colours prime with grey or black. If you are going for bright, prime with white. You can hand prime or spray, I recommend airbrushing but if you can't do that get a can of model primer white. Normal paint is shit for models. Do not apply coats as thick as this guy, I also recommend acrylic paints as you only need to thin with water and they are a ton healthier for you to breathe. The difference for the light on dark is because it can tone down that colour, leading it to be a dark red rather than if you wanted it to be a light red. Where as just having the piece primed white will keep that light red light. You know what I mean?
Enough about priming, about panel lining. If you use what is called a "wash" it helps immensely. Over in Asia it is common to use gundam markers because they do not have the amount of washes we have over here in the West. I recommend using vallejo and such
How long till it dry
손가락 칠하는 부분에서 에나멜 건담 마커로 칠하고 같은 에나멜 타미아 엑센트 컬러로 먹선 넣으면 뭘로 지워야 하죠.....??
건담마커는 락카 성분이라 에나멜 신너를 사용하시면 됩니다~
마커 칠한곳에 페널라인 뿌리고 신너로 닦아도 마커는 안지워지는군요;;
타미야 골드리프로 부분도색하고 패널라인 엑센트 먹선을 넣었는데 섞이고 같이 지워지네요 다른제품을 사야할지 아님 어떻게 해결해야될까요
같은 에나멜 성분끼리는 같이 녹습니다. 타미야 골드리프를 꼭 쓰시겠다면 먹선을 반다이 수성먹선팬을 사용하시구요(만족감이 조금 떨어질겁니다.) 확실하게 하시려면 제가하는 방식처럼 군제락카 골드를 붓도색하시고 패널엑센트 먹선을 넣으시면 확실합니다.
BUNKER PLA 그럼 다른 질문으로 건담마커로 부분 도색후 페널라인으로 먹선 하면 괜찮을까요?
손가락에 먹선 넣을때 사용하신 제품명 좀 알려주세요
타미야 에나멜 먹선입니다~
The thinner will not rub off the gundam marker ?
Please use gently.
Can i use alcohol as alternative? does the gundam marker will not rub off? after using gundam marker? btw I'm using pour type marker for panel lining. thanks in advance for the help. im always watching you vids and style ^_^