Haswing Protruar 1.0 12V 65lb Thrust Trolling Motor Review
Вставка
- Опубліковано 11 чер 2017
- This is a review of the Haswing Protruar 1.0 12V 65lb thrust trolling motor. It is powerful, lightweight (approx.13 1/4 pounds), quiet, and energy efficient. The step-less speed controller allows for infinite speed settings. The current draw (A) of the trolling motor with no load was less than 3A and the maximum draw was less than 32A at full throttle.
- Спорт
I like Your professional background - priceless :-)
Haha! DIY via Harbor Freight.
Thank You for including the amp draw at full throttle !!!
Thanks Gary.
The manufacturer says the max amp draw is 50 amps. And...the video says 2hp, but the manufacturer says 1.0 hp thus the name 1.0. Anyways...
Also I was going to order, but no extra props available. They are out of stock!
I did a comparison between 2 x Chinese make trolling motors (same brand - Haibo)
1) the manufacturer cost of the 54lbs was 22.32% lower than the 65lbs model (54lbs=$87 / 65lbs=$112)
2) the thrust was 20.37% higher (54lbs vs 65lbs)
3) the current saw a -14% decrease (54lbs=50A / 65lbs=43A)
4) The rpm was also -2.94% lower (54lbs=1700rpm / 65lbs=1650rpm)
*CONCLUSION* : The 54lbs was 22.32% cheaper; the 54lbs was 2.94% faster; the 54lbs had only 20.37% less torque!
HAVING SAID THAT - One should compare price/thrust/power/current/rpm speed - these statistics tell an interesting picture!!!
thank u for doing this video
You are welcome.
I like your videos. Thanks for all the information. What kayak are you using in the field test?
Thanks Rick. I used the Haswing on several different kayaks. Great motor.
Looks like a great trolling motor, love the fact that it's light weight. How much do those cost? And could you eliminate the head and hook up the wireless trolling motor pro to it? I currently have the 46lb Newport vessels tm with the wireless trolling pro, but it's still pretty heavy.
$299 shipped to you on eBay
As Donald Bradner stated it is $299 total price shipped from Haswing Outdoor on Ebay. The wiring is more complicated than standard TMs because of the built-in PWM. A typical PWM unit probably won't work. I am currently modifying mine and will post a video when completed.
How would you rate this against a Minnkota or Motorguide unit?
Aksman Their is black cord with 5 wires coming out what kind of cable is that?
Somebody said it was cat5 but don’t look like the cat5 from the store. Try to extend the head close to the seat please help
@@Aksmaniyak I know your comment is 5yrs old but here is the explanation, regular pwm controllers that we have seen on videos related to trolling motors are for brushed, the ones for brushless have three wires, good pwm can be found related to RC hobyy, example: hobbywing, castle, etc..
What was your top speed on the yak at WOT if known?
I've had the protruar 1.0 for 2 months now and have used it alot. I have to say that so far, this is the best trolling motor I've owned. I purchased this as new open box for a reduced price. There was no manual for it. That being said, I can't find an online manual either. Not as though I really need one now,I I noticed some features that are not referenced on there site such as a connect and disconnect beeper feature and if it hits something or gets tangled badly,it will beep and shut off. These features are awesome but I only found them by trial. I don't understand why this isn't mentioned in any of there descriptions. You would think this would be a great selling point.
Glad to know that you are happy with your choice. I would contact the company you bought it from and ask for a manual.
What is its top speed and in what boat?
@@joaovictorf.carvalho458 I have mine on an Intex excursion 5. If you're not familiar with those they're fairly wide and flat,flat bottom and a round bow so they're not very dynamic but still get around 5 mph which I think is pretty good. If it was on a kayak or canoe or even an inflatable with a keel and pointer bow you'd probably pick up a couple mph more. Definitely a bit faster and more power than the Minn Kota 55 that I had on it and a lot lighter also. A bit more noisier though.
Thks for quick reply, I know the intex 5, 5mph on it is very good, my boat its a costco tobin sport canyon pro for 3 person. I'm just starting, I have a minn kota max 40 and I'm thinking on upgrading on near future, Have you seen about people talking on using a rc airplane model propeller? Its the apc 10x6 if Im not wrong, it increase speed in 20% and decrease also the current. Thnx once more for the info
@@joaovictorf.carvalho458 No I'm not familiar with the the rc props but I have put different 3 blade props on my Kota 55 and this protruar also. I've tried the kipawa 3 blade on my minn Kota and it's better the the 2 blade stock prop, has better speed and better in the weeds. I also tried putting it on the protruar and it wasn't good. It didn't balance well and lacked power. On the other hand, the motorguide machete 3 worked great on both of them but had to do a slight mod by adding a thicker washer.
Sales at AQUOSPRO said the diameter of the shaft on the Haswing Protruar 12V 65lb. thrust trolling motor is 1.1 inch which is slightly less than 1 1/8 inch.
I tried to update the narrative with the information but a new YT program won't let me update it because it does not recognize Haswing as a real word.
@@Aksmaniyak 😂
VERY GOOD PRESENTATION! can i use it at sea plz ? Do you know the energy consumption at slow speeds? ty
Thank you Bill. Haswing trolling motors are rated for fresh and salt water use. I only noted the amp draws at no load and max load. You could estimate amp draw at in-between speeds.
@@Aksmaniyak
ty.I have an intex seahawk 3 ,will i be ok with that motor? so the low speeds are really low,i dont want to run too fast at low speeds,do you think that max speed generally is 5 miles/hour as usuall to motors of 65lbr ? ty!!
@@billlegend4014 Yes, you can go very slowly with the digital speed controller and 5 MPH is possible with good conditions.
I have a jon boat but like my trolling motor in front. Are you able the switch the head/handle around?
Yes, it has a set screw/bolt like most TMs.
Thinking about upgrading my trolling motor but I am seeing all the comments about not being able to get parts if something breaks.
Any Comments Aksman?
Mine have never broken. What parts are you talking about?
Watching the boat going in circles doesn't give you a sense of just what speed it can do. So that part of the video wasn't a .very helpful demonstration. I still have no idea of what speed it can push the boat.
It was to demonstrate maneuverability. Most trolling motors propel a kayak between 4-5 MPH. It is based on many factors like, hull design, payload, wind/weather conditions. Speed with the same motor can be different from kayak to kayak so speed is not really an important factor.
I want to did you try to modify brashless trolling motor to make it remote
Hey i thought you did a vid of the head removal on this motor but i cant find it.
I am wanting to know how many wires run down the shaft and what size they are. Iam going to be getting one and want to relocate the head to my seat.
Thanks
This is the one where I removed the head. It is a different Haswing model but the same concept. ua-cam.com/video/XVCqQn5WLyE/v-deo.html
@@Aksmaniyak Thanks, sadly that didnt help much. That motors look much diffenrt that the protruar one.
The motor may look different, but the extension wiring was the same.
I’m buying this motor next Friday. Question for you do you think a 40amp Marinco twist plug and receptacle would be ok for this? Also what size manual circuit breaker would you use?
Hi Chris. The 40A switch would work but I would go with a 50A if possible. I would use the same size circuit breaker to match your plug.
Thank you, i appreciate it!
Sorry for all the questions. Just want to order the right stuff. Do you think I should use 6 gauge copper wire or will 8 gauge be fine for wiring? I'm wiring a Jackson Cuda 14 and may use the front big opening for batteries or maybe the center long hatch. So might be 10-12FT of wire run. Also When you extended the head up to your seat what size wire did you use?
No problem Chris. I ran 10G for the +/- battery extensions and it works fine. As for the head wiring, I do not remember what the exact gauge was. I took a sample to Radio Shack and they matched it with a 4 conductor telephone wire jack extension that worked perfect. I twisted, soldered, and wrapped the connections. I hope that helps.
perfect thank you. I actually think i saw one of your videos now that you talked about the telephone cable not sure which one it was, but i'll find it thank you so much.
was you able to build a pwm for this trollmotor?
I'm wanting to get rid of my NV mk180 24volt system and use this with a wireless remote pwm.
You do not need a PWM with this motor. It has a digital speed controller already.
I understand this video was 5 yrs ago but I looking at purchasing a electric outboard motor. I Came across a protruar 3.0 for $500. My question to you is are they good trolling motors or should I go with the newport vessel nk300?
Haswings are good and affordable motors but this one is not the same as the NK300.
Do you think this trolling motor would fit threw a hobie mirage drive or do you know the diameter of the motor housing? Thanks
Hi Ralph. I have never owned a Hobie so I do not know if it will fit.
Do you know how wide it is? Needs to be about 3 1/4 inches or smaller to fix in a hobie drive.
Thanks
Can you possibly tell me the diameter of the shaft? I made a motorized steering system that fits a 1 1/8 shaft and I'm hoping that is what this is. Thanks.
It is a little bit smaller than 1 1/8 inches in diameter.
Aksman Thank you.
I bought a newport vesseel 55 kayak series in amazon 3 days ago and today amazon cancel my order due a shipping delivery damage issue and now im lucky to see this video from you again with this option that will be my way to go: AQUOS Haswing 12V or 24V Transom Trolling Motor for Saltwater, Freshwater Fishing on amazon if you have a link from amazon i can buy it with your link, but finally after all this year do you still recommend it? Or what did you think about the one i send you? Im just waiting for amazon to refund me. only 14 pounds is amazing!!...
The Haswing 12V 65lb trolling motor is an excellent motor.
I have a 55 lb thrust Newport. How much faster would the 65lb be? I just want some more speed.
I have also owned a NV 55 lb trolling motor. They are a quality product. Kayak speed is based on many factors; hull design, total weight payload, weather/water conditions...etc. Increase in thrust does not mean increase in speed. More thrust will just get your kayak to the same top speed faster with all those factors. Most kayaks with trolling motors have an average top speed of 4-5 MPH. If your only reason to upgrade the motor is for more speed, it will not make a noticeable difference. I hope this helps.
thanks
What you think if i put this motor on my feelfree kayak (38kg) i planed to go with that on rivers good or not ?
It would work fine.
Hi wanted to ask did you check top speed of that trolling motor
It was between 4.5-4.9 MPH depending on the conditions.
@@Aksmaniyak thank you
You are welcome.
I wonder if this can be over volt to 24v for double the power output
I don't know but I wouldn't try since there are digital components in the unit.
What is Diameter of shaft; can you measure with a digital micrometer to get inches and decimal reading? Thankyou
I don't have the trolling motor anymore to measure it. It was smaller than the standard MK 1 1/8" diameter.
@@Aksmaniyak thankyou; I did email company for info.
@@Franklinveterinarycenter1of4 If you post the size, I will add it to the video narrative in case somebody else wants to know. Thanks.
@@Aksmaniyak I'll be sure to let you know when company emails info.
is there a 2 blade prop that will fit on this motor?
I have never looked for one so I do not know.
How has the haswing protruar held up?
Great motor still running strong.
Battery indicator do they change colour?
No.
Is the shaft diameter 1 1/4"?
No. It is a little smaller than the standard 1 1/8 inch diameter.
Ok thanks.
Hi. I'm hoping u can help me out here. I bought my 1.0 a couple years ago and I can say it's been great. I broke the speed handle and have been trying to contact the seller who is haswing2018 as well as haswing outdoor and haswing USA. I have emailed and phone messaged them only to get no reply at all. Before I purchased this, I contacted haswing outdoor and was assured I could get parts if needed. I'm very frustrated at the total unprofessionalism with this company and there disregard for there customers. I'm guessing if I have a hard break, I may as well throw it away. Unless I can find a place to get parts, this will be my last purchase with this company. Do you have any suggestions? Thanks.
I have not had any problems contacting Haswing Outdoor. Sometimes they can be slow but they always get back to me in at least 2 days. What email address are you using?
@@Aksmaniyak info@haswingoutdoor.com
That's the right one.
What’s your top speed on the frontier?
I reached almost 5MPH.
whats the amp draw?
Hi Angel. It is listed in the narrative.
@@Aksmaniyak it's max 50 amps
if the prop is only 3 inches under the water it might be 32. But that's not efficient.
@@grahammarshall6135 I put a meter on the motor at WOT and got that value. Actually, for good water/weather conditions, the prop should be at that depth for best results. The deeper the prop unit, the more drag is produced and therefore higher amp draw.
Manufacturer says cast aluminum shaft. Pretty sure it's extruded. Anyways...