Dang DUDE! A 6S 4TEC.. That looked FAST! 🚗🔥🔥🔥🔥🌬️🌬️🌬️ I'm so choked your GPS didn't record a speed! 😫 DO IT AGAIN RICHIE. Loved it, I need to get mine speed run prepped. I got foams and the 55T spur finally. Those GPM braces you got likely help a lot, I should get those.
That last pass was 'on it' I brought it in to about 4-6ft away, not that I'd recommend it, I've gone 80' ish before and that thing was way, way faster.
Thanks I'd not realised the cars screen was so dirty until I got to my test spot and didn't have anything to clean it with. I'll try again later this week - with workign GPS!
What gearing are you using? Mod 1? What about rear tires and front tires? I'm running mamba monster 2 1/8 esc(6s) with a 1/10 tekken gen 2 8.5turn. This thing rips. But need more traction.
35/55 optional speed gearing. 45mm rear foams 30mm front ones (The 45mm ones are from amainhobbies) . One of the best things I did though was to fit the gpm rear brace which stops the violent wheel shake. On one of my '4-tec upgrades' videos I list all the upgraded parts I'm using also I fitted ceramic bearings all round, it'll now coast for 70-80ft off the throttle even from a low speed.
I've just done a shakedown run with it this week, video went up today. Throttle was reversed which didn't help when trying to do speed run. More to come though
Well done, for the motor is the 150 F range too hot, or is that considered the upper end of still comfortable. The other day I ran that on my car, motor high 140s - low 150s, esc was around mid 120s (was a monster truck though, I know the larger tires and all make a big difference), just curious.
Will the 4800kv mamba x motor go faster on 6s than the 5700kv . I just want a mamba motor that I can get up to 130mph+ with gearing I want to find the gearing my self its funnier that way but I have no clue with motors. Hope u can help love the channel
depends on the gearing BUT given the 4800kv is going to be limited on 6s e.g. only 3s rated so will get very hot very fast, heat is going to be your main issue, too much heat will fry the magnets. 130 with a castle motor (3S) rated is going to be pushing it to the absolute limit.
I wouldn't bother removing the driveshaft you'll have a lot of work to do besides removing it also it drifts superb on the $10 drift tires I got on amazon
it was running 5700kv castle in this video, I have tried it with arrma 4s though with that it accelerates like a rocket but not very high top speed even with 1:1 gearing
I personally don't as it's a car that handles great out of the box and the amount of mods you can get is crazy. It's the money you'll spend on mods that's the scary bit!
Indeed I'd put the GPS on and it's normally been 100% reliable but today 19mph (Oh I think it was quicker than that!). I'll test it in my auto today and check all's well with it.
Get Your Very Own Traxxas 4Tec 2.0 VXL Right here - bit.ly/34mCcxh
Get the RC GPS Speed Meter we use here - www.banggood.com/custlink/33K3ov8L0p
Love the fact that the go pro was mounted inside the car loved the view ,now to get gps mph to see how quick she is
Propably everything i have ever dreamed of.
Simply insane! Love to see what the speed was on 6s. Your temps looked very good. Can't wait to see the next run. 👍
Dang DUDE! A 6S 4TEC.. That looked FAST! 🚗🔥🔥🔥🔥🌬️🌬️🌬️ I'm so choked your GPS didn't record a speed! 😫 DO IT AGAIN RICHIE. Loved it, I need to get mine speed run prepped. I got foams and the 55T spur finally. Those GPM braces you got likely help a lot, I should get those.
6s! On a 4tec? That’s just crazy insane Richie! Happy Father’s Day brotha! Great video,it’s so fast! 👍👍👊👊📹📹
That last pass was 'on it' I brought it in to about 4-6ft away, not that I'd recommend it, I've gone 80' ish before and that thing was way, way faster.
Driftomaniacs ya Richie it was definitely moving!
Where do you get that cool aston martin body?
The wheels and tires you have on that look way wider than the stock what are they? I’d like to put them on my Ford tech 2.0 VLX3S
Happy Father's day Richie. Wow that 4tec on 6s is wicked fast . I think it hit Mach 5for speed , very good video💪👍👍😎🇨🇦
Hey driftomaniacs when you used the 5700kv motor did you eventually fry the castle motors you used in the awesome video really a big fan 4s
I’m, wondering the same thing, is the Castle 5700kv motor 6s? I have one and I’m just now getting my 4Tec going.
I’m, wondering the same thing, is the Castle 5700kv motor 6s? I have one and I’m just now getting my 4Tec going.
WOW things crazy fast id wreck it in the first run i think lol.
Great job keeping it on the road man 😎
What lipo batteries are you using?
can you send the link for the motor and ESC
Is this with the mod1 gearing installed? Curious how the plastic is holding up around the spur shoulder in place of the stock bearing
What did you set your brakes to? My car instantly wants to skid. Thank you
Richie boi, that was almost as quick as neeeeeeeeeeeooooooooooWWWWWW😎
Hey Rich, you have a link for those batteries?
Nice onboard camera man! Well don!👍👍
Thanks I'd not realised the cars screen was so dirty until I got to my test spot and didn't have anything to clean it with. I'll try again later this week - with workign GPS!
This shouldn't exist but I love that it does
What gearing are you using? Mod 1? What about rear tires and front tires? I'm running mamba monster 2 1/8 esc(6s) with a 1/10 tekken gen 2 8.5turn. This thing rips. But need more traction.
35/55 optional speed gearing. 45mm rear foams 30mm front ones (The 45mm ones are from amainhobbies) . One of the best things I did though was to fit the gpm rear brace which stops the violent wheel shake. On one of my '4-tec upgrades' videos I list all the upgraded parts I'm using also I fitted ceramic bearings all round, it'll now coast for 70-80ft off the throttle even from a low speed.
I will have to go back and find that video and watch it through cause I'm using 29/72 and getting speeds of 60-70 with pretty much stock everything.
where can i get them tires??
4tec enjoys 1/8 systems..guys on my track running them on xlx with 8cells...drivetrain doesn't mind a bit.
Brother I have that car on 3 s
It’s fast but. 6 s yours it super fast
Nice touch with the on board cam
I've just done a shakedown run with it this week, video went up today. Throttle was reversed which didn't help when trying to do speed run. More to come though
What gearing ?
That's fast! Awesome!
Well done, for the motor is the 150 F range too hot, or is that considered the upper end of still comfortable. The other day I ran that on my car, motor high 140s - low 150s, esc was around mid 120s (was a monster truck though, I know the larger tires and all make a big difference), just curious.
160 is about as hot as you wana get
james krapish thanks
Will the 4800kv mamba x motor go faster on 6s than the 5700kv . I just want a mamba motor that I can get up to 130mph+ with gearing I want to find the gearing my self its funnier that way but I have no clue with motors. Hope u can help love the channel
depends on the gearing BUT given the 4800kv is going to be limited on 6s e.g. only 3s rated so will get very hot very fast, heat is going to be your main issue, too much heat will fry the magnets. 130 with a castle motor (3S) rated is going to be pushing it to the absolute limit.
Thinking of getting this car for drifting. Would removing the driveshaft help it to drift?
I wouldn't bother removing the driveshaft you'll have a lot of work to do besides removing it also it drifts superb on the $10 drift tires I got on amazon
Just get diff locked for the back
Nice Run please tell me where did you get that body at or what body is it
Jennifer Lloyd that’s an Aston Martin body
What wheels and tires do you use?
Foams from amain hobbies
What motor does it have?
it was running 5700kv castle in this video, I have tried it with arrma 4s though with that it accelerates like a rocket but not very high top speed even with 1:1 gearing
How is that vxl when it’s not a traxxas motor and esc
So what would you rather me call it? Do you see every xmaxx owner or XO1 owner who doesn't run the stock motor NOT calling it an xmaxx or XO1???????
Driftomaniacs well the castle system isn’t a vxl system. Vxl is the stock system. Just like on arrma’s it’s the blx system.
That kind of acceleration would kill someone
looked nice and fast...
I think it's got 100 in it but I'm really struggling to find a good spot to run it in without any hassle
That little thing as fast as fuck
More juice and insane fast! LOL!!!
What kv motor is it
5700kv in this video, now running on 6s castle 2200kv setup
Do you feel like it’s a little overpriced
I personally don't as it's a car that handles great out of the box and the amount of mods you can get is crazy. It's the money you'll spend on mods that's the scary bit!
Castle makes a good product it might just last for a lonv time
Blisteringly quick.
83mph so far BUT I've run out of room! I think it's got 100+ in it given room to stretch it's legs. It's just getting going when I have to shut down
do some legit speed runs
Indeed I'd put the GPS on and it's normally been 100% reliable but today 19mph (Oh I think it was quicker than that!). I'll test it in my auto today and check all's well with it.
Wanka