Spray Painting Car Parts: Cheap, Easy, Awesome
Вставка
- Опубліковано 15 тра 2019
- When used and applied properly it’s crazy how well a spray paint job can turn out!!
SPONSOR! @hux_racing
hux_racing?utm_...
Facebook: / huxracing1
Website: www.huxracing.com
Garage IdiotS
Instagram @garage_idiots
/ garage_idiots
Business @isonhydrographics
isonhydrogr...
Facebook.com/IsonAutomotive - Авто та транспорт
I love the metal cast duplicolor line of paints. The blue and purple are my favorites. The copper is nice too.
Agreed!
Amazing color. Never thought about painting coilover parts. Your experience and hard work shows
I just painted a pair of driveshafts for my project upcoming on my channel...not as bad as it seemed. 👍
Amazing job! I agree with Steve P. "You one hard working guy keep up the good work." Great tips!!! That Turbo looked awesome...
Thanks man!
Great video for spray can it came out great nice job
Good job man, the paint and the video.
You, Seems really excited.. Can't wait to bang that clear coat spray on your car parts 👍😍
Great work broski.
Nice Blue. Nice work.
Looks great dude
Filtered air recycler in the booth to cut down on that fog bank that rolled in during clear coat. That fog drys, clumps and gravity kicks in.
Hey thanks man big help years after making
That blue is almost the same color as my del sol, fire in the sun ☀️ light
Yea!!
im wanting to re-paint my coil springs on my lifted jeep tj.they are black now but wondering what type of blue you would use.i really like that color blue in video.wondering if it will hold up pretty good considering its so hard getting coil springs sanded.and did you use rattle can clear and what kind if you dont mind.i bookmarked video,good job if it all holds up.i used to paint and body work with mostly acrylic enamel some yrs back so i know its a tough job sometimes.thank you and any in-put apprteciated alot.thank you
I 💘 metal cast!
You aren't the only one who does this. 😉 I did the entire engine bay of my Saab with Metalcast (I used Green, did a mix of 5 coats), Super Gold and Hi-Temp primer, White and the exhaust manifold is just in clear, no paint....if you think Metalcast runs, use White Knight Super Gold/Super Chrome, you'll learn what run truly is!! 😱 Dupli-Color are awesome. I use their paint-match cans all the time. 👍 Go and check out that range, it works really well.
Nice man!! And okay will do!!
Nice vid. I like tips. Hit that 10min mark though son, get paid.
10 min is the pay cut off??
I used black with silver metal flake with red anodized over that with 5 coats of clear on my motorcycle back in the day. Turned out beautiful.
I bet!
@@GARAGEIdiotS was like a poor mans candy paint. Lol
Did you heat treat any of these parts, or does the vht paint work well without it
Which black spray paint did you use for the black embelms?
Looks great but I always thought epoxy primer was a sealer, you should always etch primer over epoxy before base coat.
Epoxy is used more for sealing bare panels if not painting straight away.
Would this paint last on coil springs?
Sounds like that blue would be a cool effect lightly over a silver design.
I use it to tint carbon a lot
Question: the paint will handle a torque specs when installed, example; i planning to paint a cross member on my car and the torque specs a re 54 ft lb, you think that the paint will handle or it will crack/flake ??
Who says you cant do sweet things with rattle can 😂 great work as always
Haha thanks!
loved your performance in Maze Runner
Hahaha dude everybody tell me that or some sort of we’re the millers joke
i liked him more in black mirror bandersnatch
What sandpaper did you use to prep it .
One question why do you prefer to paint parts (Rattle can or Spray Gun) with them on work bench instead of hanging it or using some kind of stand?
Sometimes it’s easier, if I need to hand a part I will, but my two saw horses and big piece of wood have been treating me well
We’re can I buy this blue spray paint ? Also how after the 3rd coat how long should I wait too add the clear coat and also how many clear coat passes did you do
Autozone has it, instructions are on the can, I can’t remember clear coat time after base coats
👍👍from this guy
Great job what grit sand paper you used to sand the metal??
220
@@GARAGEIdiotS thanks bro!!!!
Man they look great!!! I just did my valvecover with the etching primer and some vht high temp gold -- turned out GREAT there's a video up on my channel if you're ever interested in checking it out! Cheers from pueblo man!
I’ll check it out man! And thanks!
The last step... was that a sealer??
Question: Do you prefer salt or pepper?
I prefer salt.
Salt
GARAGE IdiotS perfect!
Did u sand it down to bear metal
Anodized pain,, I put that sh*t on everything 🤣🤣 plastic or metal.. awesome video man and good ideas.. please check out my ls1 block paint anodized blue and my pt cruiser video i did intake anodized blue..
I\'m not sure but ,if anyone else wants to learn about car spray painting tutorial try Sovallo Auto Painting Fixer ( search on google ) ? Ive heard some unbelievable things about it and my work buddy got excellent results with it.
hey ,if anyone else is searching for car spray painting course try Bablim Paint Booster (do a search on google ) ? Ive heard some decent things about it and my neighbor got amazing results with it.
Um...umm ummm.
UA-cam I don’t watch ads, stop this !
Another UA-camr that does not know how to hang the part first. Is it just too hard to hang the part from a wire? Do you even go back to paint the part that you missed?
Lol I’m spray painting parts and your complaint is I don’t hang them? I apologize for my lack of craftsmanship
We are not here to learn "correctly"
Oh haha sorry