let me know in the comments below what other videos you would like me to do on simhub or simracing in general, don`t forget to like and subscribe and hit that bell notification🙌😃
:greetings. [i have a query for you , hope you can help. my wheel was connected to the simhub before i shut down the pc. the wheel was plunged in at shut down. start up and the simhub have no connected hardware. installed to newest version of simhub, but ti no help. and i have not touched anything at all. i did windows update. it help last time i had the same problem. but not this time. all other things work on the wheel. just not my led lights. and as long you build this tings, i hope your comprehension of this things can help me get i to work again. thx ] : Frank-Eddie-Bjørge: Nikolaisen.
Gary, stupid question, do I need to run Simhub after I programmed the Arduino and connect everything and all up and running? Cause Simhub doesn't work on my Sim PC ( Graphic card issue).
Hi! Do you know any possibility how to make a text appear on my 8x8 matrix while being triggered for example by changing my brake bias? If i change it to 50.5, that that value will slide through my 8x8 matrix without having to make each “frame” myself? I got it working now by maring each frame myself, but shouldn’t it be possible to let simhub read the value and automatically show it as text? Would love to hear if you have any suggestions!
Thanks for the video's Gary, was just wondering if its possible to run multiple devices on the one arduino nano? i.e. a RGB led rpm bar using a WS2812b and a WS2812b led matrix to run flags on
noice video i bought a gear gauge from you back in 2020 love it thanks for the explanations is it possible to have an input in game (keyboard key or pedal input) to give an input signal to a arduino nano lets say?
I have plugged in two 8x8 matrix displays. I want to use the indicator for cars passing left and right. I have one display on the left and one on the right above the TV. But the indicators are showing up on both displays instead of split. How can I fix this?
The issue with using the matrix pre set is its not configurable, it may be best to set the matrix as ws2812 with 64 led, then you can control where the leds are seen, so 1-64 leds on the first display then leds 64-128 are not used. With this method you will have more control
Hi! How are you? I have a steering wheel with an arduino nano board, but it does not recognize the buttons in the sim hub, maybe this type of board is not compatible for this? .. greetings from Argentina
Tje arduino will have a sketch on it already. Go to windows start > devices and printers and check the arduino, right click , game controller settings, properties. It should sbow the buttons work as you press them
This is really, really helpful info thanks. I've just ordered a Nano v3 & TM1638 to try building a simple display. Can you tell me, is there a way to tell if the Nano uses old or new bootloader? Thanks, subscribed :)
let me know in the comments below what other videos you would like me to do on simhub or simracing in general, don`t forget to like and subscribe and hit that bell notification🙌😃
Thank you for the video, my gauges are looking for a key on signal. Do you have any advice for that?
Complimenti vorrei sapere se possibile usare un display a sette segmenti e come poterlo configurare. Grazie
:greetings. [i have a query for you , hope you can help. my wheel was connected to the simhub before i shut down the pc. the wheel was plunged in at shut down. start up and the simhub have no connected hardware. installed to newest version of simhub, but ti no help. and i have not touched anything at all. i did windows update. it help last time i had the same problem. but not this time. all other things work on the wheel. just not my led lights. and as long you build this tings, i hope your comprehension of this things can help me get i to work again. thx ]
: Frank-Eddie-Bjørge: Nikolaisen.
Gary, stupid question, do I need to run Simhub after I programmed the Arduino and connect everything and all up and running?
Cause Simhub doesn't work on my Sim PC ( Graphic card issue).
Yes you do mate
Hi!
Do you know any possibility how to make a text appear on my 8x8 matrix while being triggered for example by changing my brake bias? If i change it to 50.5, that that value will slide through my 8x8 matrix without having to make each “frame” myself?
I got it working now by maring each frame myself, but shouldn’t it be possible to let simhub read the value and automatically show it as text?
Would love to hear if you have any suggestions!
Thanks for the video's Gary, was just wondering if its possible to run multiple devices on the one arduino nano? i.e. a RGB led rpm bar using a WS2812b and a WS2812b led matrix to run flags on
Thanks Gary all sorted great tutorial 😉
Awesome mate 👍🏻😁
noice video i bought a gear gauge from you back in 2020 love it thanks for the explanations
is it possible to have an input in game (keyboard key or pedal input) to give an input signal to a arduino nano lets say?
I have plugged in two 8x8 matrix displays. I want to use the indicator for cars passing left and right. I have one display on the left and one on the right above the TV. But the indicators are showing up on both displays instead of split. How can I fix this?
The issue with using the matrix pre set is its not configurable, it may be best to set the matrix as ws2812 with 64 led, then you can control where the leds are seen, so 1-64 leds on the first display then leds 64-128 are not used. With this method you will have more control
Figured it out with the new content buttons. Thx for the detailed video and sketch explaining. This is recently added in an update. Few months ago
@@thijsesseboom1109 yeah just seen that now in the matrix hardware settings, good to know 😃👍🏻
Quality video dude, any idea how to centre the rgb's if they're too far over to the left?
Hi! How are you? I have a steering wheel with an arduino nano board, but it does not recognize the buttons in the sim hub, maybe this type of board is not compatible for this? .. greetings from Argentina
Tje arduino will have a sketch on it already. Go to windows start > devices and printers and check the arduino, right click , game controller settings, properties. It should sbow the buttons work as you press them
Seen it in description 👍
Great video
What Is your store on eBay called bud didn’t see it come up.
www.ebay.co.uk/itm/165059615166?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=b18l7dFfQma&sssrc=2051273&ssuid=b18l7dFfQma&var=&widget_ver=artemis&media=COPY
Heres a link to one of the parts i sell, if you click on my other listings you will see the rest mate
This is really, really helpful info thanks. I've just ordered a Nano v3 & TM1638 to try building a simple display. Can you tell me, is there a way to tell if the Nano uses old or new bootloader? Thanks, subscribed :)
Hi usually you can see the version of the bootloader when you order them. Also i have not really noticed a difference on the old vs new loaders tbh
Do you still sell the tachometer? Can't find you on ebay..
www.ebay.co.uk/itm/165710697796
yes mate i do, thanks