Update: Using a Winegard Trav'ler with DISH Hopper 3!
Вставка
- Опубліковано 25 вер 2018
- Dish 1000.2 DISHPRO Hybrid (DPH): amzn.to/2xPqsDz
Dish Network Hybrid Solo Hub: amzn.to/2Dsll2b
RG6 Patch Cable: amzn.to/2IHi78x
Dish Hopper 3: amzn.to/2QRLgmq
- If you have a 2018 edition or newer of a DISH Winegard Trav'ler and want to use a Hopper 3, the BEST Dish DVR, it is easier than ever! Let me explain how make it compatible!
Blog Post: outsideourbubble.com/update-d...
Great information, my local dish dealer said this couldn't be done. I'll definitely be upgrading my equipment.
Thanks Dave, Worked like a charm.
Great tip thanks David.
Looking buff sir!!
Got it all. Now to put it in and call Dish RV. Bought the parts separate. All parts are new.
Great video and information! My Dish Trav'ler has a manufacture date of 070218. Will this upgrade allow access to the 61.5 satellite? Right now I use a VIP-211K receiver. Sometimes I have to switch to the 61.5 satellite so all of my local channels are in high definition. I just have to run a "check switch" test when switching back and forth. Will the Hopper 3 and this upgrade allow for switching to the 61.5? Please let me know. Thank you.
Just bought a new to me RV with the travler. Do I need the 42
Switch to use a dish wally? I used it with my tailgater antenna with no problems. Tried to hook it up to travler and it will not work. Looking for help.
So is the LNB from the first try at this to this second one. Is that LNB the same as the new one? I am just finely doing this.
i have a 2003 winegard turret and all i did was get the DPH 42 Switch and hook up the three cables and one off the injector and it works . there is no up date for the controllers
When do you and Brenda start your winter Journey again ?
get info thank you
Dave - I converted my Direct Sat dish to Dish via a kit from Winegard this July. The controller is a 2014 model. What do think are my chances that I have the correct LNB?
You would need to do my other video tutorial for the Hopper 3. It is the turret that needs the correct boards in it. Guessing you did not replace the entire turret and just was the dish, arm, and LNB. As such, you would still have the older hardware in it. Here is the other video if you had not seen it... ua-cam.com/video/l4ap0RqEsI0/v-deo.html
Just to be clear, is your unit an 18? The procedure you did before the kit works for older units right?
Hi Chris...My entire unit has been replaced and is a March 2018 unit as shown on the SN which was from my unit. The first video I did will work for ANY unit, new or older. This one is just less costly and a cleaner install if you have a 2018 unit. Worked with Winegard on doing this setup to be sure it was correct and would work just fine with the new Hybrid LNB. When I did the first video, I still had my original unit still up on the roof and then after I did it it, I had fun changing it out. Not that it was hard to do, the hard part was getting the unit up and down from the roof. The good news us I could still use the same base plate.
Wait !! What happen to the >>Hybrid DPH42 Switch?
It depends on the year your traveler was manufactured as mentioned in the video if it needs the switch or not. Link to where I talk about it... ua-cam.com/video/uAp_EyhA4po/v-deo.html
Are you able to run a receiver in the bedroom as well as the living area at the same time
Yes. One Hopper and one Joey unit. You can even use a Wireless Joey which makes it even more easy.
Tha is for the info.
I bought a dish 1000.2 tripod kit, the 42 switch and the hub
Will that work for connecting the hopper 3
I am sorry, have no idea. How old is your Trav'ler? You might of bought the wrong kit and could have just bought one that came with a western arc Hybird LNB and a Solo Hub vs getting the switch as it is not needed with the Hybird LNB. The LNB that is on the older trav'lers need the switch and Solo Hub, so not sure why you would have bought a new dish kit with a LNB. So hard to try to help as I really am not sure what you even have. If you don't down a Trav'ler, are are just asking about what you just bought, then I guess the same thing comes to mind...why not just a tripod kit with a hybird LNB vs needing to use the switch?
@@DavidBott Thank you, that's all I needed to know.
I watched you first you tube video about hooking up the travel 1000 with the 42 switch and hub so I thought I would have to have one no matter what.
I bought a 1000.2 western arc ( without hybid) the 42 switch and hub.
I'll return it and buy the ( hybrid 1000.2 dish and keep the hub so I can hook up the hopper.
Thank you for your time.
The hopper and LNB vendors on AZ (that you link to) are out of stock. I found both on WaMxRxT online. Got a new dish from WG. Someone in the comments on WM said I still get a 15$ a month modem service charge from Dish even if I own?? Is that true? Only thing left to do now is put it all up once it comes and hope Dish turns it on .
I have never heard of a "modem service charge".
With all of the streaming services such as UA-camtv, directtv now, Hulu etc., are dishes even necessary?
That is personal choice. While what you say is true, can you always count on having good data that is enough to stream? Living full time I can say that we don't always have data service in some places we still go or have been to.
David Bott good point, I am usually in one place which makes it much easier. Thanks for replying.
So I just received a June 2018 trav’ler, I got installed. When I checked lnb cables it has port 1 on lnb to port c on torrent , it has port 2 on lnb going to port a on torrent , I have my cable plugged into port c and run to hybrid solo hub , then to hopper and joey. My trav’ler is only getting sat 119 . But my hopper has been running the installation test for about a hour. What should I do from here ?
Did you buy a Hybrid LNB as it does not come with one and the Hopper 3 requires the 1000.2 DishPro Hybrid (DPH) ---> amzn.to/2xPqsDz
No I didn’t know about the hybrid lnb. I have tried with the dph42 switch and still doesn’t work that way either , just not sure what path forward is
So I will get this new head ordered , with the new head do I need to install the dph42 switch ? Or just hook to port c ?
Hi...Did you see the video? :) There are TWO ways to use a Hooper 3, if you have a 42 switch, it will work for any DISH Trav'ler but it is a totally different install and thus another video I did that was referenced. If you have a 2018+ unit, as you do, then you would want to go with the Hybrid LNB I referenced and install it/wire it as mentioned and you will be just fine. Not only is it much less expensive, but it makes for a much cleaner install as you do not need the 42 switch on the roof and won't need the BIG power supply it has. So get the LNB I referenced and you will be good. You said you have the HyBrid Solo Hub, so that is good as you need one. Once you have it all in place, run the test again on the Hooper 3 and you should get all 3 sats. (Assuming your dish is pointed as it needs to be and has clear sky to see all three.) Take care.
I called winegard to order that switch and they just said its a replacement LMB and would need the switch to use the hopper 3
I called Winegard to order that part and they said it is not a Hybrid LMB just a replacement and no matter what I need to use the switch to use my hopper 3
Nope...see my other reply to you. There are TWO different LNB's you can use depend on when your unit was manufacturer. If older that 2018, the you use the LNB it has, but with a DP42 switch and Hybrid LNB. If it is a 2018+ unit, then you replace the LNB with a new LNB I referenced and also still need a Hybrid Solo Hub. See the notes with links in the description.
I have a home dish, it looks to be the hybrid, I am going to give it a shot. My winegard I just got today has a number (27688890510181043) so this should work. sorry about the other comment I posted to the wrong place. If it works, I can send back the DPH42 switch once it comes in.
@@DavidBott It works great thank you for the info reading about 68 to 70 on 110* 119* and 129* and it's raining
Any preliminary thoughts on what we might expect when later this year we get the new WI-FI 6 systems up and running? And while you're at it, how about some comments on the new 5G service?
Neither of these questions have anything to do with satellite television service.
I know ,but you seem to be more 'in the know' about some of these issues. I don't know any other way to contact you , so that's why I just sent a reply to one of your shows. Thank you for all you do. You've actually helped me with a good lot of info. Please keep it up.
There is a link in every video, well most, that links you to our travel blog Outside Our Bubble. OutsideOurBubble.com So much more info you are missing out on. :-) (Wi-Fi 6 is a renaming of how they name encryption and at this point means nothing at this point. Cell data 5G service is also only available as a home service in select cities and will not be in devices or locations for some time.)
yah what about port B and can you say that really fast 3-time
It is not used for this configuration. You can leave it connected to the turret so the end is not exposed and just leave it disconnected up at the LNB.
make a wire diagram plzzzzzzzzzzzz
Hello “Ourside”
Do you follow up on this page?
Hi... Not sure what there is to follow up on. Other than new DISH Travel'ers are Hopper 3 ready seeing this video is a number of years old.
Hi David
New to Dish in my RV
I followed your updates with my pre-2018 Trav’ler.
I replaced the LNB, arm and reflector, added the DPH42 and power inserter and Hybrid solo hub.
When I run test installation my Hopper 3 recognizes the DPH42 but only shows 2 SATs, 110 and 119.
Trav’ler control box shows 3 SAT’s with asterisks.
Any suggestions?
@@porthole2 In that case, seeing it seems you converted from DirecTV as there is no reason otherwise to do what you did, I would give a call to winegard. With that said, the Winegard box does have a different turner it to find the sats than what the Hooper users. (The Wingard being more sensitive.) So, seeing it did not lock on to 129 which sits lower in the sky, do you maybe have something in the way? You could be just on the fringe of the Hopper being able to lock 129 even though the control box can see it. (Usually a tree). Not sure what you are located, but the more North you in the US, the harder it can be to get 129, as it is so low, unless you have a clear view of the sky. Hope that makes sense. But it is good that the Hopper sees the right switch and that the controller can identify all 3 sats.
@@DavidBott
The winegard is not the issue.
Locks on to all 3 in less than 5 minutes, 3 SAT’s, 3 asterisks.
That part of the swap worked out well.
The Hopper 3 only shows 2 SAT’s 110 and 119, the 3rd column never displays
Currently we are in southern Georgia.
@@porthole2 Right, but the tuner in the Winegard controller is more sensitive and thus may be able to "SEE" 129 where the tuner in the Hopper 3 may not be and thus not show up. This is why I brought up if anything could be in the way of 129 which would be lower on the horizon.
“Newier”, snerk, where’s your copy editor?? And one thought on a TV. When we went full time, we left our TV behind and we couldn’t be happier.
Nice catch. Oh well, I don't do this for a living and surely do not do it professionally so I am sure it is not the first time something got missed and will surely will not be the last. As far as leaving the TV behind...Great! Then you surely have no need for something like this which would also save you $. :)
What about port B. What did port B do. Port B has filling too. Did port B do something wrong. Did port B say something to you that made you mad?
It is not used for this configuration. You can leave it connected to the turret so the end is not exposed and just leave it disconnected up at the LNB.
@@DavidBott ok I just wanted to know. I was afraid that port B and you were fighting or unhappy with each other. It's good to know that you and port B are still friends. 😄