Будет работать как надо только если настроить его как надо, в России их ни так много, по этому пришлось настраивать самому,методом проб и ошибок. Зато теперь, после того как приобрел заглушки, могу снаряжать нарезные патроны и использовать его как пресс для гладкоствольных патронов тоже
I have a extended lever ,primmer aluminum tube drop ,different lineage and Hornady qd Mount you can install lee qd also, I like lee qd but they started to use aluminum but I prefer the older steel so that's why I have to use Hornady qd.
Okay, have you guys actually listened to the commentary between 2:00 and 2:30. You rush way to fast though this. I digress, take it up to 3:09. Confusing for sure.
What is supposed to be the advantage of lowering the die onto the case as opposed to raising the case into the die? To me, this appears to be just a gimmick. No thanks.
@@MatthewQuigley I went through two of them and they both suck. Couldn't get $3,000 worth of bump back on the shoulder on 223 Remington. Had to screw the guy in one-and-a-half turns pass contact to get the required amount of bump and then it sheared off the heads of the cases when extracting the round from the die. Echo
You could have demonstrated the bolt and screw adjustments. I have no idea what you were adjusting.
Agreed. The included user manual is just as useless.
Будет работать как надо только если настроить его как надо, в России их ни так много, по этому пришлось настраивать самому,методом проб и ошибок. Зато теперь, после того как приобрел заглушки, могу снаряжать нарезные патроны и использовать его как пресс для гладкоствольных патронов тоже
What makes it better than any other press
very good press ,, my mobile press of choice.. Foster press is also good.. and mark5 are my recommendation to anyone looking to reload.
I have a extended lever ,primmer aluminum tube drop ,different lineage and Hornady qd Mount you can install lee qd also, I like lee qd but they started to use aluminum but I prefer the older steel so that's why I have to use Hornady qd.
Okay, have you guys actually listened to the commentary between 2:00 and 2:30. You rush way to fast though this. I digress, take it up to 3:09. Confusing for sure.
What is supposed to be the advantage of lowering the die onto the case as opposed to raising the case into the die? To me, this appears to be just a gimmick. No thanks.
summitpress👍
parts №14👎
worst press I ever owned....
Why?
@@MatthewQuigley I went through two of them and they both suck. Couldn't get $3,000 worth of bump back on the shoulder on 223 Remington. Had to screw the guy in one-and-a-half turns pass contact to get the required amount of bump and then it sheared off the heads of the cases when extracting the round from the die. Echo
@@MatthewQuigley super difficult to adjust. Not consistent on shoulder bump. The single post allows too much inconsistency…
@@Nightmarehc130 Convinced. I'll keep my Rock Chucker.
so, a rebel or rockchucker is better for rifle? these work fine for handgun imo
👀 p͎r͎o͎m͎o͎s͎m͎