Thanks! Nope, no issues whatsoever. Since getting these blinkers (amazon cheapos) I've heard they fail prematurely so I would recommend something better, but the location seems to work well!
Cool! Could you describe how you did your blinker mod? Just drilled in two holes in the rear light housing? Do you use special holders for the blinkers inside the housing?
Hi how does it go being closer to the tire when the suspension is full compressed will the muffler miss the tire and the brake caliper. Thanks for the vid looks heaps neat and love its titanium
@@maxb7087 You have to drill out the small spot weld at the end of the pipe. You need good quality ti coated bits as its hard metal, start with a 3 or 4 mm drill in the center of the weld, when you get to 6mm the weld should be gone, you then tap the baffle back and fourth from the back with a bit of wood and it should break loose. You can refit the baffle if needed with a 6mm bolt. It's not too loud without the baffle.
Might make another vid, have had this on for a bit now and love it, sound is just right. It's all in the kit, mid pipe and silencer. You add a mount to the bracket that holds the license plate holder!
Did u buy this from off the road or direct? It seems the same loudness as stock. Hope its not because I ordered one. Is it EURO 5 stamped? Is it possible to remove the baffle by drilling it out?
How is that right hand slim indicator light holding up where it's located? I've see drop-down kits for the standard light, but might be a bit ugly then.
Camel tail tidy but looking to replace with something that doesn't have blinker mounts now. And I did my own blinker mod. Drilled them into the brake light housing
Really neat and how the factory should have mounted it.
such a beautiful bike
Huge difference in sound. Thanks for posting.
thats nice !! but
i prefer Arrow full exhaust system !!!
Cheers from Greece , a T7 lover !!
Dream bike man!! 👌👌👌👌
the last one is the best sound
If I wasn't surrounded by stuck up neighbours I would have had some more fun with that one. It's shockingly loud.
Sweet sound! End made me giggle. 2 Quick questions: was is a slip-on or full system and what was that cone shaped mesh you've put in?
Hey Puff, just a slip on and I'm not sure, maybe the built in spark arrestor?
Really nice turn signals setup !
Would you mind let me know where do you buy these turn signals ?
Thnaks a lot
Hi. What tail tidy/lights are you using in the rear ?
Sounds and looks sharp man! 👍
Did you experience any problems with silencer's heat against the led turn signal?
Thanks! Nope, no issues whatsoever. Since getting these blinkers (amazon cheapos) I've heard they fail prematurely so I would recommend something better, but the location seems to work well!
@@thomvarey That's great to hear, thanks for reply man! Cheers!
@@motoric5188 Happy riding!
Cool! Could you describe how you did your blinker mod? Just drilled in two holes in the rear light housing? Do you use special holders for the blinkers inside the housing?
Have done it myself. Even fixed the drooping blinkers.
Hi how does it go being closer to the tire when the suspension is full compressed will the muffler miss the tire and the brake caliper. Thanks for the vid looks heaps neat and love its titanium
Hey thank you, there's plenty of clearance. i think some others have shown photos of that on the T7 facebook group
Looks awesome! What tail tidy did you use?
can you retain the passenger pegs with this setup? Great Video BTW!
Thanks! Yep you can, doesn't affect passenger at all.
I got one of those HP corse pipes today, I removed the baffle so it sounds awesome now.
is it hard to remove? is there a bolt or you need to drill something?
@@maxb7087
You have to drill out the small spot weld at the end of the pipe.
You need good quality ti coated bits as its hard metal, start with a 3 or 4 mm drill in the center of the weld, when you get to 6mm the weld should be gone, you then tap the baffle back and fourth from the back with a bit of wood and it should break loose.
You can refit the baffle if needed with a 6mm bolt.
It's not too loud without the baffle.
0:59 "YEEAHH!!"
What no ride by sound??? Sounds pretty good Idle/rev. What pipe set up is on that to get that exhaust up high like that?
Might make another vid, have had this on for a bit now and love it, sound is just right. It's all in the kit, mid pipe and silencer. You add a mount to the bracket that holds the license plate holder!
hi how did u record sound ? with what equipment massive quality
Thank you! Sony a7s3 with Zeiss Distagon 35mm 1.4, and Schoeps MK2H microphones.
@@thomvarey thanx
Did u buy this from off the road or direct?
It seems the same loudness as stock.
Hope its not because I ordered one.
Is it EURO 5 stamped?
Is it possible to remove the baffle by drilling it out?
Off the Road, euro 5. At idle just 1-2 db louder. Under power noticeably louder, deeper, more bark.
@@thomvarey
Thanks
How long did it take to get it shipped?
@@JohnSmith-ef8nr 4-5 months for my pre-order. I think they're gettin them out the door faster now though
Do you have a link for off the road’s website?
How is that right hand slim indicator light holding up where it's located? I've see drop-down kits for the standard light, but might be a bit ugly then.
No issues from heat. I've heard these blinkers aren't built to last (think I paid 20 bucks on amazon) but still going strong!
Salut ou je pourrais acheter se support de plaque s’il te plaît
Hi ,.nice exhaust, maybe i want one to 😋, but first a rack, that looks good to and handy... Maybe you can chair what kind you have .?
Greetz Alexander
Good saund
What blinker mod did you do?
DIY, blinkers from Amazon routed through the brake light housing
Witch plate support / Blinker Mod please ?
Camel tail tidy but looking to replace with something that doesn't have blinker mounts now. And I did my own blinker mod. Drilled them into the brake light housing
@@thomvarey too bad that there is no simple solution or already ready
@@Earth2Quake hp corse actually sells a plate to mount the blinkers lower, but I prefer them up high so did my own build. Only took a couple hours
@@thomvarey brilliant blinker mod! Love the set up and sound mate
@@idozen13 thanks!
oh lawd, the last 10 sec.... you probably go deaf within 1 hr, but that is one sexy grumble.
More noise, oh boy.
Cost?
Best place to order?
@@Gimme_Stitches Got it from off-the-road and paid about 550 euro.
nice using factory mount the way it should be in first place :)
FYI, this does not use factory mount. It connect under the rear fairing.
Last version is better ;)
Oh yeah
sounds better, but doesn't look as nice
Stock sounds better.
lol