MultiCode Wireless Keypad Programming Tutorial
Вставка
- Опубліковано 28 сер 2024
- MultiCode 4200 wireless keypad programming tutorial.
www.thegategeek.com
Transcription:
In this video I'm going to show how to program this MultiCode wireless keypad into this MultiCode receiver.
Even though the manual states that the keypad retains the programming when changing the battery or when the battery goes dead, this is usually not the case.
Let's look at the dip switches on the receiver.
Here is a close up picture.
The numbers that we will need to program are the ones that are, "on", or depressed at the top here.
This receiver it is set for 2, 4, 6, 7, 8, and 9 on.
These are the numbers that have to be programmed into the keypad.
The default code for the keypad is 1, 2, 3, 4.
Press "radio learn" button twice.
Then the default code 1234.
This light has turned on.
And now enter the dip switch numbers 2, 4, 6, 7, 8, and 9
And press the "radio learn" button.
This light will turn off. Entering the default code 1, 2, 3, 4, will activate the receiver.
This light is connected to the relay so you can see the receiver working.
The lights on the keypad are now flashing.
You will not be able to see them in this video because of the bright lights.
After the access code is entered the keypad lights will begin flashing.
Any button will activate the receiver while the keypad is flashing.
The keypad will flash for approximately 30 seconds.
Pressing a button while it is flashing will start the timer over.
Please keep this in mind while programming, and be patient, or you'll pull out your hair, or hit a frying pan with your face.
Now the keypad is programmed to activate the receiver.
THANKS A TON! Ours was "not working" for 5 months. Really a pain as I knew it was fixable, but my husband insisted we needed a new one. I was at the hardware store looking for a replacement and thought I'd google Multi-code and found your video! THANKS :) It's working perfectly! The 30 second wait was key!
+Diane Suits Your Welcome!
THANK YOU THANK YOU THANK YOU!!! I was struggling for TWO WEEKS, finally did a Google search and your video came up. Saw that I was doing the inverse numbers for the access code - thank you for the red arrows!!!
Great vid. Thank you. Note to self 6 months from now: if the unit forgot the Radio code it also forgot the Access code. It's 1234, not the super-secret code you've been using for the last 6 months.
Thanks for the great vid! Very clear and helpful. I was stumped by not first setting the Radio Code - after my battery died. You "saved the day". Keep up the good work!
Thank you. After hours of searching and trying to reprogram my keypad---even using the Stanley website---your tutorial was the only one that actually worked.
Thank you! Worked! The instructions that come with the opener are not clear at all and might even be wrong lol.
Thanks for this! Got our building keypad working in five minutes. I'm family hero!
Man, a thousand likes to you. This is one of the best videos are out there. Only question i had is how to program dip switch #10 , its a double digit.
# 10 is programmed with the 0
THANK YOU, I have done this several times in the past but never as quickly as with this information. Seems it was always just luck and I could not duplicate it. Yesterday, several attempts before I gave up. Today, one try and done. Thanks again.
Love your way of telling How To do it. Straight and . forward thank you so much.
Thanks for the video. Note to those who do it. Sometimes the code for the dip switch is backwards. On mine the box had the word open written on it, but actually that was the close side. So if it doesn't open try the code opposite. Good video though thanks
Great video.
The manual was too complicated for a non gate guy
Excellent audio video quality and the best I have seen so far. I have been asked to do a couple of these types of tutorials for some of my customers and yours is the one to beat. Thanks for the video. Thumbs up from us and subscribed!
Thank you!
Ok, got the dipswitch numbers but it won't take my new code.
Thanks for your information
Big help, thank you!
Your a life saver 👍
Good vid. Now I know it is ON when it is depressed.
So if I match DIP switches on a new opener with the original opener, the new opener should open a gate as well?
Will I lose my entry button device if I re program it
Thanks a lot you help you solve my problem keep it up
Wish there was an app for this control also
Helpful video thanks!
Bummer. Although i can get button remotes to work, this code one 420001 does not work.
I like it
f I take the battery out hold any button for 10 seconds, the unit will reset to default factory setting correct? or does that only reset if i hold the radio learn and access learn together for 10 seconds>? so all it takes for someone to gain access is to just reset the device??
Dang it! Now, even though I changed the battery, when I enter my code the keypad just flashes. Any suggestions?
Love it
Good job!
What's the receiver and how do i get its numbers?
Is it possible to screw it up so badly nothing works? Should I pull the battery out for a while?
Pulling out the battery for a while, will reset to factory defaults.
Thanks!! 👍
excallent video.
Is this a backlit keypad ? Can be propramable ?
It is a metal one ?
Mine works once, and opens the gate then never again.