C6 Corvette Z06 Gets Angle Kit and Coilovers + STREET DRIFTING!!!

Поділитися
Вставка
  • Опубліковано 30 вер 2024
  • Stoked to get the DriftVette all set up with the FDF angle kit and Silvers coil overs, but even more excited to rip it for the first time with the saucy upgrades!
    INSTAGRAM - / kennyslides
    FACEBOOK - / kennyslides
    Use promo code "KENNYSLIDES" to receive a discount on these products below for your DriftVette build:
    DRIFT HQ CORVETTE C5/C6 DUAL CALIPER KIT - bit.ly/3w0d4tu
    DRIFT HQ HYDRO LINE KIT - bit.ly/3fe9K84
    C5 / C6 CORVETTE UNIVERSAL HANDBRAKE MOUNT - bit.ly/3smNNHC
    FDF CORVETTE C5/C6 MANTIS ANGLE KIT - bit.ly/3cmS1JE
    SILVER'S NEOMAX COILOVER KIT CHEVY CORVETTE C5/C6 - bit.ly/31x5Ejz

КОМЕНТАРІ • 124

  • @JoshPTV
    @JoshPTV 3 роки тому +16

    You're making me want to throw that kit on my C5. Looks like its well built. Also the video was informative 💯💥💥

    • @KennySlides
      @KennySlides  3 роки тому +1

      Do it!! Thanks for watching 🙏🏼

  • @judahfindley
    @judahfindley 3 роки тому +4

    She’s a ripper. I’m ready for my ride along

  • @roeunpapa
    @roeunpapa 3 місяці тому +2

    If you put Angle Kit on it, it makes noise when you're driving normally
    Can't you hear it??

    • @KennySlides
      @KennySlides  3 місяці тому +1

      It only makes a little noise when backing up with the wheels turned quite a bit.

    • @roeunpapa
      @roeunpapa 3 місяці тому

      @@KennySlides Thank you so much for your reply
      I'm rooting for you in Korea

    • @KennySlides
      @KennySlides  3 місяці тому +1

      @@roeunpapa no problem at all and thank you for your support!

  • @carlos64030
    @carlos64030 3 роки тому +1

    That suspension kit is pretty nice! One thing, though...
    Those damper adjusters for the rear coil-overs can't be cut down to fit closer to the cargo floor?

  • @ZackCalvin
    @ZackCalvin 3 роки тому +1

    Saucey machine

  • @theofficialkiller9657
    @theofficialkiller9657 3 роки тому +3

    Awesome!! Been waiting patiently to see the Z06 finally set up. The first test hit looked solid, way better, way less sketch than when you had it out at that spot completely stock. Can’t wait to see more!! 🤘🏻🤘🏻

    • @KennySlides
      @KennySlides  3 роки тому +1

      Thanks for the support! Thing feels solid for sure 🤘🏼

  • @tb5118
    @tb5118 9 місяців тому

    Great video, just purchased a 2007 C6 Z06 with only 8000 miles on it. I am looking in to a heads, cam, exhaust and intake package for street use only. Would you have any recommendations for me.

  • @stephaniesmith8680
    @stephaniesmith8680 3 роки тому +3

    I’m glad you went with the Apex wheels.

    • @KennySlides
      @KennySlides  3 роки тому

      Me too bebe 😉

    • @glennferriso5908
      @glennferriso5908 2 роки тому

      What specs did you go with on the wheels? Was it BMW figment? I looked at the website and they only have 10 and 11 wides for corvette.

  • @eddiehags9098
    @eddiehags9098 3 роки тому +1

    yoooo kenny slides big fan first view much love ☝️☝️

    • @KennySlides
      @KennySlides  3 роки тому

      Thanks for watching brotha! 👊🏼

  • @user-ql1pc7pi9x
    @user-ql1pc7pi9x 7 місяців тому

    Beautiful car. I want one, but they're expensive here in New Zealand.

  • @azfroggiesrcandmore6727
    @azfroggiesrcandmore6727 3 роки тому +2

    Lookin good Kenny!!!! Those wheels set it off just right! Can't wait to see some other videos of you out with it!

    • @KennySlides
      @KennySlides  3 роки тому +1

      Thanks man! I’m really diggin how she looks and feels!

  • @jasonaune6889
    @jasonaune6889 3 роки тому +1

    At least I ant the only one that put Coilovers on a vette and didn’t use the front sway bar. Glad to see it ripping again

  • @bhcamaro2002
    @bhcamaro2002 3 роки тому +2

    Man that thing rips now! What a beast! 🤟😎

    • @KennySlides
      @KennySlides  3 роки тому +1

      Thanks man! She’s rowdy now 😎

  • @joshfrank4485
    @joshfrank4485 3 роки тому +2

    Solid asf

  • @djnemesis82pluss1877
    @djnemesis82pluss1877 3 роки тому

    Yeah think the one adjusters bent because u bent it for demonstration lol

  • @Fast4.6
    @Fast4.6 3 роки тому +2

    I have been WAITING for this

  • @leronnorton
    @leronnorton 3 роки тому +1

    You definitely motivating me to get a drift vet, hope to do runs with you one day🤟🏽

  • @Flipzco
    @Flipzco 3 роки тому

    Come out East. Let’s shred

  • @fullspoolcustoms3944
    @fullspoolcustoms3944 3 роки тому +1

    Ripperrrr

  • @Dubiels
    @Dubiels 3 роки тому +1

    Killer first run! That thing is sick and it seems like you’ve been driving it forever already. Nice work!

    • @KennySlides
      @KennySlides  3 роки тому

      Really appreciate that brother!

  • @Kastra707
    @Kastra707 3 роки тому

    What’s the wheels setup you had with the apex wheels?

  • @austinjames11b
    @austinjames11b 3 роки тому

    I used your code and got a mega kit kit last week

  • @anasparekh3049
    @anasparekh3049 3 роки тому +1

    Such a dope build man, and awesome breakdown on the work too. Your doing awesome things man!

    • @KennySlides
      @KennySlides  3 роки тому +1

      Really appreciate the kind words! 🙏🏼

  • @ryangertridge
    @ryangertridge 3 роки тому +1

    Hell yeah Kenny, nice to see ya back🤘🤘looking good so far bud..

    • @KennySlides
      @KennySlides  3 роки тому

      Always appreciate it buddy! 🤘🏼

  • @proto7688
    @proto7688 Рік тому

    How much caster did you set?

  • @mariosnikolaou5212
    @mariosnikolaou5212 7 місяців тому

    How are the coilovers holding up? Were you satisfied?

    • @KennySlides
      @KennySlides  7 місяців тому

      The coil overs work awesome! Comfortable ride on the street and work properly on the track 💪🏼

  • @NINJABOI1234
    @NINJABOI1234 Рік тому

    What did you do about your swps¿

  • @tevinthomas2647
    @tevinthomas2647 3 роки тому

    Give me a job 🤧

  • @AndrewWolboldt
    @AndrewWolboldt 2 роки тому

    I've worked on that car, I put brakes on it for Ernie before he painted it. Looks SICK!

  • @ShskyThompson
    @ShskyThompson 2 роки тому

    Could u drive a car with a angle kit daily ? Or not comfortable ? Pros n cons

  • @dropdownromania
    @dropdownromania Рік тому

    The tyres are Melting properly 😅😅

  • @shawnsouthwell5632
    @shawnsouthwell5632 3 роки тому

    Do you mind sharing whether you had to remove the front brake ducting or whether you had to clearance anything else inside the inner fender? Have a c6z and I'm debating between this kit and the mini mantis. Thanks!

    • @KennySlides
      @KennySlides  3 роки тому +1

      I removed the front brake ducting cause it would indeed hit the tires when reaching full lock

  • @trevorball9037
    @trevorball9037 3 роки тому

    What do you think of the coilovers after driving them for a bit? I daily my c6 so don’t want to be breaking my back on every bump lol, was looking at bc racing ds series but these look quality!

    • @KennySlides
      @KennySlides  3 роки тому +1

      They honestly ride amazing! I’m surprised it rides so smooth with the aggressive spring rates. My buddy wishes he went with the Silvers over the BC coilovers

  • @Co1eTrain84
    @Co1eTrain84 3 роки тому

    car looks great :)

  • @martiniusetihw
    @martiniusetihw 3 роки тому

    Awesome!!!!!!!!!!!! So happy to see you back out there brother!!!!! That angle kit is no joke!!!!!!!! The stance on that Vette is mad aggressive!!!! Happy for you brother!! Can't wait to see you really get in it!!!!!!!!

    • @KennySlides
      @KennySlides  3 роки тому

      Greatly appreciate the kind words and support brotha! God bless you man 🙏🏼

  • @SuperChipperson
    @SuperChipperson Рік тому

    Nice setup 🏁

  • @garrodallen7648
    @garrodallen7648 3 роки тому

    Are you running an MSD 2step controller on this, like you did in your TA?!

    • @KennySlides
      @KennySlides  3 роки тому +1

      Yup I have one on this car too!

  • @916chevyboy
    @916chevyboy 3 роки тому

    Ken everything you handle is slippery! Shot out too GM techs! "Pops"

    • @KennySlides
      @KennySlides  3 роки тому

      Slide everythaang haha and Pops is the real MVP! 🙏🏼

  • @RCKreations
    @RCKreations 3 роки тому

    Drifting on those tires going to be alot better then those Michelins... the steering angles was a must cant wait to see some sick drigts...

  • @em2attic
    @em2attic 3 роки тому

    Its literally night and day compared to the first time you skid it.

    • @KennySlides
      @KennySlides  3 роки тому

      Oh absolutely haha 😂 Thing is controllable now 🙌🏼

  • @tevinthomas2647
    @tevinthomas2647 3 роки тому

    Bro where's the trans am 😢😢😢

  • @kaceylucas15
    @kaceylucas15 3 роки тому

    F-ing spicy bro. Can’t wait to see some tandems with the new setup.

    • @KennySlides
      @KennySlides  3 роки тому

      Thanks bro! Tandems on the way 🤘🏼😎

  • @alice2663
    @alice2663 3 роки тому

    That clearance in the front is driving me crazy ! Sweet. 🤘😎

  • @oskarmojardin3958
    @oskarmojardin3958 3 роки тому

    Super clean, will be waiting for the next drift vid

  • @tevinthomas2647
    @tevinthomas2647 3 роки тому

    I swear you have the best channel on youtube 🤦🏿💯

    • @KennySlides
      @KennySlides  3 роки тому

      Dang I really appreciate that! 👊🏼

  • @daylatedrift
    @daylatedrift 3 роки тому

    Gonna need to get a trailer for tires now 🤣 dope setup brother 👌

  • @MrBlacksmoke7
    @MrBlacksmoke7 3 роки тому

    great info no bulls*it keep up the good work

  • @KTVBUILT
    @KTVBUILT 3 роки тому

    New car is perfect 🔥🔥🔥

    • @KennySlides
      @KennySlides  3 роки тому

      Thank you brotha! 🤜🏼🤛🏼

  • @deo900boy
    @deo900boy 3 роки тому

    🔥14:00 Z06 in the back like "KACHOW"🔥

    • @bhcamaro2002
      @bhcamaro2002 3 роки тому +1

      Nice 4th gen! 😎👌

    • @deo900boy
      @deo900boy 3 роки тому

      @@bhcamaro2002 🤯 RIGHT BACK AT YOU 🤤

  • @fnaauto7282
    @fnaauto7282 3 роки тому

    She’s a ripper for sure 🇺🇸

  • @MoBiLoViNc3
    @MoBiLoViNc3 3 роки тому

    Hell Yeah !!!!!!! I Love It

  • @giorgibiwadze4655
    @giorgibiwadze4655 3 роки тому

    coooooll

  • @skilmer
    @skilmer 3 роки тому

    Kennyslides 🔥🔥🔥 FTW!

  • @florianreinhart6438
    @florianreinhart6438 3 роки тому

    Damn looks so sick man

  • @felipevaldez4983
    @felipevaldez4983 3 роки тому

    Very nice job bro

  • @bayarea1974
    @bayarea1974 3 роки тому

    More videos💯🔥

  • @firstnamelastname9188
    @firstnamelastname9188 3 роки тому

    Sick bro

  • @tommccarthy7227
    @tommccarthy7227 3 роки тому

    Kick ass🔥

  • @Topnotch_JZ
    @Topnotch_JZ 3 роки тому

    badass dude

  • @shanedoink
    @shanedoink 3 роки тому

    This vette is nasty. Good stuff sir.

  • @natesartin2708
    @natesartin2708 3 роки тому

    Rad! 🇺🇸

  • @Paul.Breaux
    @Paul.Breaux 3 роки тому

    Nastyyy