How to Replace Front Wheel Bearing Hub 1999-2007 GMC Sierra
Вставка
- Опубліковано 26 сер 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/id/1ASH...
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 1999-2007 GMC Sierra.
• Check here for more videos on the 1999 to 2007 GMC Sierra 1500. • GMC Sierra 1999-2007 2...
This process should be similar on the following vehicles:
1999 GMC Sierra 1500
2000 GMC Sierra 1500
2001 GMC Sierra 1500
2002 GMC Sierra 1500
2003 GMC Sierra 1500
2004 GMC Sierra 1500
2005 GMC Sierra 1500
2006 GMC Sierra 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Pry Bar 1aau.to/oa/1AXA...
• 15mm Wrench 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 18mm Socket 1aau.to/oa/1AXA...
• 22mm Socket 1aau.to/oa/1AXA...
• 36mm Socket 1aau.to/oa/1AAS...
• Blowtorch
• Brake Caliper Hanger 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• 3/8 Inch Air Impact Gun
• T55 Torx Socket
• Socket Driver
• Swivel
• Torque Wrench 1aau.to/oa/1AXA...
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/oa/1AXS...
• Rust Penetrant
• 10mm Hex Socket
• Center Punch 1aau.to/oa/1AXA...
• Floor Jack 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Jack Stands 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
GMC Sierra 1999-2007 2nd Generation: • GMC Sierra 1999-2007 2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Confused why he wire brushed and cleaned up the old hub just to throw a new one on it😂
Hahahah I was thinking the same thing as he was cleaning it!
yeah ikr, wtf🤣
Rustbelt tip for the t55 bolts, throw them in the trash and go to your local autoparts store and buy ones that have an 18mm head exactly like the brake caliper bracket bolts. saves so much headache when you have to remove them. (Edit): you can get them at Advance Auto Parts.
The spider at 4:11 was mesmerizing. ;)
Dremel /rotary type tools for rust removal on the inner hub
Great tutorial, thanks! Took me a few hours of regular hammering and then slide hammering to get the hub off
Best how to videos out there 👍👍
How long did this whole process take?
I (and/or) my son do all our vehicle work but if I was having it done outside I'd want you or someone as thorough as you to do it. 👍
Good stuff!!
You guys are awesome, keep up the great work 👍🏼
Oh, very good demonstration. Easy to follow.
Very good video, I liked that attention was paid to the small details as well as very descriptive directions on the job. My hub was seized on so bad it took awhile to get off with a ton of beating with a sledge hammer. One question I have and if anyone can answer id appreciate it greatly. I ordered my new hub and the ABS cable was too short so I used the old one, upon test driving one time briefly the brakes did something weird don't know if they have to reset? Or if there's an issue with using the old cable
Do you put anti-season or engine oil to keep the engine room seizing up?
Thanks for the video. Very helpful!
great tutorial, thank you!
Why he cleaned the old hub, probably used some clips from this video in other videos: brake rotor etc.
Threadlocker is called for by the factory service manual on the caliper bracket bolts. Use it.
Stay gold.
Good job man
My front wheel hub isn't attached to an axle lol
35mm socket
Why would you clean the old assembly like that of you're replacing it
Fr bro cleaned the old hub just to put a whole new one on
Nice
Why did you waste time and brake cleaner scrubbing and cleaning the old one so it's clean in the trash I don't get it
Oo999