Geo Throttle Body Gasket
Вставка
- Опубліковано 6 вер 2024
- This was a 1.2GB upload.
This is one of the longer vids I have done on the geo. So it may only be really appreciated if your a gearhead like me. Anyways thanks for watching
Disclaimer:
Due to factors beyond the control of Hank's Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Hank's Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Hank's Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Hank's Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Hank's Garage.
Thanks for this I have a high idle issue and I suspect this gasket is the issue cause when i spray fluid on it the idle lowers. But this video made me realize Autozone gave me 2 of the wrong gaskets and found the one I really needed thanks to your video. Interestingly enough it says it won't fit my geo but we'll see about that
sorry you dont have it anymore and are not on the forums. thank you for the video though. very thorough.
Long shot: I know this video is old, but I'm curious what the problem was with the car. Also, I have a problem with my own 93 and could use some advice or video links about it. Thank you
I think it was a vacuum leak, check geometroforums for alot of info on these cars
@@hanksgarage_ thank you very much for replying! I've searched far and wide, with no clues as to the problem with mine.
Mine acts like it has a flooded carburetor, even though it's injected. I have to crank if for a while with full throttle to get it to start, and it won't rev above idle. I can gradually ease back on the throttle somewhat, but it still won't rev. Then it dies after a short time.
I thought the injector had been leaking, so I replaced it, but it won't run any better. I'm out of guesses and don't know any reputable local mechanic; just a bunch of part swappers. Already spent $330 on a local who actually did nothing, made things worse, and I had to correct his work [and got to keep some hose clamps and 2 feeler gauges he left under my hood]. New fuel filter, plugs and wires, a few new sensors already.
@@jamesengland7461 you may have a cracked block, or possibly is your timing belt to tight? It would be squeaking like crazy
I do not have the car and am not active on the forums anymore.. sry
Is the same for 2000 Chevy metro 1.3 4 cilindry. Thank you...
The problem was never solved just listened. I have no idea what it was I tried everything.