Angstat Attributed Berks County Pennsylvania Longrifle | Featured in "The Kentucky Rifle" by Dillin
Вставка
- Опубліковано 4 жов 2024
- Learn more at ilovemuzzleloading.com
A note inside the patchbox attributes this rifle to Joseph Angstadt and indicates this rifle is featured in plate 6 rifle #3 on page 8 of "The Kentucky Rifle" by John G. W. Dillin where it is listed as from the Laidacker Collection and by an unidentified maker. The rifle is similar to some others attributed to Joseph Angstadt. Angstadt is listed as taxed in Maxatawny Township in Berks County, Pennsylvania, in 1800 and then in 1817 just to the west in Kutztown. A comparison to No. 55 on page 164 of "Thoughts on the Kentucky Rifle in Its Golden Age" by Kindig is useful as that rifle is signed "Jos. An." There are also a small number of other "JOS ANG" or similarly signed rifles that share similarities with this rifle which has a smoothbored barrel, blade and notch sights, unmarked lock, oval silver wrist escutcheon, with "eye" shaped engraving, silver crescent moon cheekpiece inlay, molding along the forend, incised and raised relief carved scrollwork on the forend at the ramrod entry pipe as well as at the wrist and the butt, an engraved four-piece patchbox with pierced finial, toeplate with wavy line engraving and patchbox release button, and a crescent buttplate with narrow toe, wider heel, and faceted tang.
Get your own "I Love Muzzleloading" Hat here - bit.ly/Muzzlel...
Click here to SUBSCRIBE - bit.ly/ILMvideo
Videos also available on Utreon - utreon.com/c/I...
Join the HCH to learn more about traditional horn work - www.hornguild.org
Join the CLA today to learn more about longrifle artisanship - www.longrifle.com
Join the TMLA to learn more about traditional muzzleloaders -traditionalmuzz...
Join the NMLRA today to learn more about muzzleloading - www.nmlra.org
Muzzleloading, muzzleloader, muzzle loader, mountain man, longhunter, bushcraft, living history, longrifle, flintlock, blackpowder
#muzzleloader #muzzleloading #blackpowder
DISCLAIMER: Our videos are strictly for documentary, educational, and entertainment purposes only. All shooting is performed in a safe environment. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including UA-cam) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. We do not endorse any specific product and this video is not an attempt to sell you a good or service. We are not a gun store and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. We DO NOT sell parts, magazines, or firearms. We are not instructing our viewers on how to modify firearms, accessories, or otherwise to change their basic legal function. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Excellent and comprehensive review. I do not believe that is an English made "Ketland" lock. This lock has the features of an early German lock (flat angles on the pan, slightly curved lock plate) . According to Kindig the Angstadt family advertised (in German) locks they were making for sale. This could be one of their own built locks which makes it even more interesting. Good review, please keep doing these!
Thank you so much Jack! I feel like a fool missing the curved lockplate and not mentioning it! Really appreciate you pointing it out.
Don't belittle yourself you did it great Justice. Absolutely an awesome looking rifle
You ARE THE person to present these firearms. Nobody else knows or cares as much about these historic antique arms.
You are too kind!
Had the pleasure of winning at RIA auction the rifle that met all my criteria: late 18th century, Pennsylvania maker, "signed" makers name - S(imon) Miller- on barrel. Totally agree with you about the "human touch" showing that rifle was used by people long gone. Favourite feature: debris / cobbe web / dust in patch box, testifying to age; leaving this intact for future owners.
Ethan, if you are having problems blowing the wood out around the pins, make sure the end of the pin is rounded and put a backer block of wood against the stock where the hole is as you tap it through. This should be a very rare occurrence but it seems people want to save a few seconds by just tapping them in without the block. Even just putting your thumb against the hole with some force is enough.
Thank you!
So true when doing any kind of through-hole with wood.
Great job on the presentation on that peace i got to tell you thank you very much.. I sure love the age of that rifle it shows it's been around 🙏👋👍👏
Dude. Gotta ask, where did you get your pointer. Way kewl!!
It’s a pen offered by “Liberty and Co”, the pen part didn’t work so good so I yanked it out and turned it into a pointer
Very nice presentation. The details about architecture, close ups are good enough for a modern master to replicate this piece for a modern shooter.
Loving the better lightening !!! You speak clearly & you love what you are doing !!! All bricks in a solid foundation !!!
Thank you David
Beautiful Rifle, beautiful presentation
I think you do a wonderful job. I really appreciate your “love of muzzleloading” and really enjoy your channel.
Thank you very much!
My favorite style longrifle. Thanks for the show. Enjoyed the presentation very much.
Glorious!!! Thank you so very much, and thank you Rock Island Auction!
Hi Ethan, I'm a recent new subscriber and this is a great job of your take on this rifle. Keep up the great work, I would like to be able to visit RIA, so nice you were able to examine these rifles in close detail. 👍
Thanks so much!
I enjoy your thoroughness in these kind of videos. Thanks
Thank you Mark
I have done quite allot of silversmithing and that involves lost wax casting.
I believe that there is a very good chance the side plate is thick because it was cast.
Now when casting anything from silver or alloy, generally speaking you cannot go to thin or the metal won't flow into very thin areas of a piece.
Now with modern technology we can cast non ferrous metals to about 1 to 1.5mm maybe less now?
Both soapstone molds and ceramic with high resistance to heat were used.
Shit, Ethan I love the way you show and talk about these rifles
Nicely done
Thank you
As a guy who grew up in Kutztown, berks County, pa, and being quite familiar with Maxatawny, my only complaint about this video is your pronunciation. But don't be hard on yourself, the number of people we hear get Reading wrong, you're doing better than most.
Sorry about that 😅 talking is never my strong suit. Appreciate your comment!
Can you tell us the story of how you got the chance to work with RIA? Great gun!
It’s not much of a story haha! I connected with some of their muzzleloading enthusiasts on staff naturally online and we became friends. I drove 8 hours overnight after work to see an auction first hand and we connected really well in person.
What do you mean by a 43 and 1 inch octagon barrel? Was that a contemporary way of saying a 44 inch barrel?
as a beginner builder I am really enjoying these video of close up looks at historic muzzleloaders. it gives good perspective. so much that you can find online is the best work by master gunsmiths that are as close as possible to perfection that make it discouraging when the gun you build is full of small mistakes. especially the engraving makes me feel a bit better. I was wondering how the incise lines are darkened. is that the just finish or was some other method used like wood burning?
Age.....
Thank you Sean!
The incised lines are darkened over time with use. You can use techniques like bone black to accelerate the process, or by layering and removing dirt and grime from the carving
It would only let me hit like once. Beautiful.
Absolutely beautiful God and you did a beautiful job that is the type of rifles that I like to build put a caliper on the barrel in it see if there's a caper in the center because I could tell it looks like it's straight like there's a little bit of a flare the end you did a great job
Gun
@@larryadams2184 Huh?
Not God but gun auto typing