is there any way I can move the actual TGT window? pops up in an obstructing place, would just like to move it a little to the right corner. great video thanks
Thanks for the compliment! Unfortunately it isn't possible to move the I-TGT window, at least not to my knowledge. I've tried looking for a keybind and I've tried dragging the UI, no results.
Just by pressing Ctrl + RMB. I don't think any of the mods that I loaded changed the UI so that'll be the default ARMA3 TGP UI. Just make sure you have a targeting pod to be able to view it. A LITENING or a Sniper pod would do.
You'll need a "Missile Carrier for Rearming". I can be found under [Props > Supplies > FIR Objects]. It's within the Eden Editor, you can type in the search bar within the Editor too. If you're interested, I have a tutorial that details what you need and what you can do with it. Here: ua-cam.com/video/fbm72nd66PU/v-deo.html
There are 2 modes, one is a "basic" bomb drop and the other takes data from your pylons. Check the firing mode for your bomb, does it have a little triangular notch? You should be in that mode if you're not. If you're using a JHMCS or similar, technically the ability to use the HMD ON option, it should say "I-TGT Mode" on your heads up display. Should be bottom left of HMD UI.
@@LeonGremory Yes I am in I-TGT mode. Since it said GPA data and not GPS, I was wondering if there was a vanilla vs Mod discrepancy happening. Also just tested it with GBU-31s and it still happens so it's not unique to 54s.
@@personthewat Oh shoot! Sorry I misread as GPS. Give this a try, choose 1 pylon to load 54s then choose another 1 pylon to load 31s. You should have a total of 2 active pylons with 2 unique payload (essentially 2 different class names). See if it still throws back the error. By any chance are you flying in a 2 seater?
@@LeonGremory You are the best!! Yes using copies of the exact same entry causes the problem. I also tested that it was the exact same entry and not the exact same bomb e.g. using a GBU38x3 on one side and a GBU-38 single on the other side count as different entries and allow GPS to work fine.
Hello! Back again! (I've deleted my previous comment) You have to be in the other mode of the bomb. In other words, you DO NOT want to be in the LOAL mode. You WANT to see a little triangle notch instead of a solid rectangle (see 12:24 of video). To make sure you are in that mode, you can either turn on your HMD if the plane has one OR you can look at the mode of the weapon by pressing the F key. As long as you are in the I-TGT mode, you should not be seeing the message. Instead you'll see "GPS MODE ACTIVATED". Hope this helps.
![[Partially Outdated] GPS & DUAL Mode Bombing w/ I-TGT MADE SIMPLE | Arma3 Tutorial](http://i.ytimg.com/vi/MuOXSOEOLyM/mqdefault.jpg)
![[Partially Outdated] GPS & DUAL Mode Bombing w/ I-TGT MADE SIMPLE | Arma3 Tutorial](/img/tr.png)
Thanks you this is music to my ears!
You're welcome!
THANKS MAN! for the tutorial.
You're welcome!
is there any way I can move the actual TGT window? pops up in an obstructing place, would just like to move it a little to the right corner. great video thanks
Thanks for the compliment! Unfortunately it isn't possible to move the I-TGT window, at least not to my knowledge. I've tried looking for a keybind and I've tried dragging the UI, no results.
How do i cycle between I tgt mode and LOAL?
How to change TGT Pod UI? to this 13:16
Just by pressing Ctrl + RMB. I don't think any of the mods that I loaded changed the UI so that'll be the default ARMA3 TGP UI. Just make sure you have a targeting pod to be able to view it. A LITENING or a Sniper pod would do.
Hi. Which pylon mod is that at 2:58
I'm using Firewill's mod from the Workshop.
@@LeonGremory Oh, I see. I can't remember Firewill has pylon management like that because I use mostly USAF aircraft. I will check again. Thanks.
I can't open AMS. It says "no AMS supported objects within 150m"
You'll need a "Missile Carrier for Rearming". I can be found under [Props > Supplies > FIR Objects]. It's within the Eden Editor, you can type in the search bar within the Editor too. If you're interested, I have a tutorial that details what you need and what you can do with it. Here: ua-cam.com/video/fbm72nd66PU/v-deo.html
So I'm using GBU54s and keep getting GPA data not found even though I send the data to the pylons and select GPS under each pylon
There are 2 modes, one is a "basic" bomb drop and the other takes data from your pylons. Check the firing mode for your bomb, does it have a little triangular notch? You should be in that mode if you're not. If you're using a JHMCS or similar, technically the ability to use the HMD ON option, it should say "I-TGT Mode" on your heads up display. Should be bottom left of HMD UI.
@@LeonGremory Yes I am in I-TGT mode. Since it said GPA data and not GPS, I was wondering if there was a vanilla vs Mod discrepancy happening. Also just tested it with GBU-31s and it still happens so it's not unique to 54s.
@@personthewat Oh shoot! Sorry I misread as GPS. Give this a try, choose 1 pylon to load 54s then choose another 1 pylon to load 31s. You should have a total of 2 active pylons with 2 unique payload (essentially 2 different class names). See if it still throws back the error. By any chance are you flying in a 2 seater?
@@LeonGremory You are the best!! Yes using copies of the exact same entry causes the problem. I also tested that it was the exact same entry and not the exact same bomb e.g. using a GBU38x3 on one side and a GBU-38 single on the other side count as different entries and allow GPS to work fine.
@@personthewat Oh my gosh! That worked?! Was about to move on to the Priority setting but I'm glad we both got the answer! Thank you!
Ei bro help me - GPS MODE NOT SELECTED. WEAPON GUIDANCE WILL BE DISABLE OR TURN TO OWN GUIDANCE, i do the same thing as your video.
Hello! Back again! (I've deleted my previous comment) You have to be in the other mode of the bomb. In other words, you DO NOT want to be in the LOAL mode. You WANT to see a little triangle notch instead of a solid rectangle (see 12:24 of video). To make sure you are in that mode, you can either turn on your HMD if the plane has one OR you can look at the mode of the weapon by pressing the F key. As long as you are in the I-TGT mode, you should not be seeing the message. Instead you'll see "GPS MODE ACTIVATED". Hope this helps.
@@LeonGremory WORKED BRO, THX YOU =).
@@lucasfranca6632 You're welcome!
@@LeonGremory hi where can i get open i-tgt system ?
@@ReospecMedia You will need a jet from Firewill's mod and a "Missile Carrier for Rearming" near the jet.
Hi, do you know why my pylon list is empty?
Which Firewill mod plane are you using? I would like to see how I can replicate the issue.
@@LeonGremory nevermind, sometimes the pylons seem to load and other times it’s empty. I managed to figure it out! Thanks!
Bruh shaw