RAM 5.7 HEMI BREATHER TUBE DELETE AND FILTER INSTALL!!
Вставка
- Опубліковано 17 лип 2024
- In this video I delete the breather tube and install a breather filter instead. Ram 1500,5.7 hemi,challenger, charger, jeep,Chrysler.
check out the frostbite ram store for cool tee shirts and merch
teespring.com/stores/frostbit...
I live in the great liberal state of NY where we have emission inspections, so I left the tube attached to my factory airbox, plugged it off at the oil filler location and let it sit in there under the engine cover to appear functional from the outside👍 I then put the Spectre filter on the 45 degree tube, and hose clamped it. All the part numbers listed worked, I have a ‘18 Ram with the 5.7
Sorry to hear that. You should move
Thanks man done it after your video looks great
No problem 👍
Hey thanks for making that video I was racking my brain on what to do about all that blow by oil messing up my air cleaner Did you also get rid of that top of the air box??
Would it be possible to Tee a breather tube off of this into a catch can? I'm using this same delete at the moment but heard it may cause issues down the road.
just did this but couldnt find the bypass BUT since the "nipple" to the airbox is above my filter I dont have a problem - just looks like something is missing (aesthetics).
I got the Circle D 3K 11" HP series stall and I'm not happy with it. When I drop it in gear there's already drag on it like a stock one, if I let off the brakes it starts surging forward like a 3K stall should not. When I decelerate it surges, and I can't stall it out over 2500 rpm without breaking the tires loose while holding the brakes hard. I went with it because I was told the 258mm one had worse surging/driveabliliy issues. So if you do go with them I'd get an higher stall than you think you need to hopefully get closer to the stall rpm you're really after. TunedRams just got his Edge racing 3k converter so maybe see what he thinks after his install and compare to my Circle D results if you haven't already decided.
That's great information brother much appreciated 🤙
Nice video. Thanks. What size are the engine coolant caps? Thanks
I would think the breather tube more effective as it's connected straight to the air intake. Does this affect performance in any way positive or negative?
Just did it today, and it works! Thank you JESUS m, and thank you Mopar Motorsports!
Great to hear!
Too much crankcase pressure will blow that right off. And this way might also cause airflow sensor issues. On my truck I ran a UPR catch can setup in place of this along with a UPR Crankcase one way valve breather to replace my engine oil cap.
This hose broke on mine and I can’t find it anywhere would this be a good alternative (completely stock) or do I need a oil catch can?
Bros I love your truck and I swear I just did this mod like a week ago and here you are making a vid of it haven’t seen a vid of the pcv delete for ram
Thanks for the support bro 🤙
Would love to meet you bros
@@JoseRivera-oc1xg you in GA
No I live in Las Vegas I might have to do a trip out there
Im not sure if you can delete the pvc system without setting off the engine light, but an oil catch can will keep the system working and separate the oil vapor out of it👍
Why do all the videos of these guys installing these breathers never turn on there car and test before and after
Awesome Frostbite《☆》Cleans it up and I would think may lower iat as well🤠☻🤠
It definitely could help a little I didn't even think about that. But definitely looks cleaner without the pipe.🤙
I know this is an old video, I hope it held up. I just did this to my 14 Ram 1500 because the barbed plastic fitting on my k&n broke. I kept the ugly tube until I'm sure it's not going to cover the engine in oil.
I had no issues
Za sto sluzi taj mali filter ? I gdje se stavlja? HVALA
Is there a functional reason for doing this?
Engine runs better?
i got a check engine ligjt is that normal ??
Is that a dry or wet no2 set up? And did you have to run à wide band o2 sensor? Last but not least how big of a shot are you running safely?
It's a wet kit and I do use a wideband and reccomend one also
What size filter is that?
Can this be done on a non turbo car?
Cause i have a 2012 Ford Figo 1.4 with a K&N cold air intake fitted in already, will be doing a full exhaust and tune soon but just want to make sure if this is possible?
Should be mine wasn't boosted at the time
I actually just installed a catch can 2 weeks ago on my ram, and noticed that big @$$ pipe. Thanks for the tip I'll be performing an ugly do-dad delete soon also 😂😎
Lol😂🤙
@@FrostbiteRam does it make a difference in horsepower or sound
@@andrefrank6659 no just for looks
Does oil end up inside that little filter? I believe it goes to the air intake to create a vacuum to siphon out the pressure build up in the crank case. When you cap it with a filter, how is a vacuum being created?
It breathes through the filter
The factory setup sucks the hot, oily, humid crankcase air back into the intake. They do this to meet EPA regulations. Old cars used breathers, like the one in this video, to vent that nasty air out into the atmosphere.
@@OddTimeMan Hey oddtimeman, - I put another air cleaner on a 72 pinto 2.0 and was wondering how to hook valve cover breather to the air cleaner, OR do I need to. for the past 3 yrs, I just have some marine carpet with a clamp where you'd hook the hose on the original oil breather?, Is that ok?
Does that filter suck air? or it does kind of the same job of the PCV?? that is remove gases from engine
It's just a breather mostly venting
What about the breather you replace the oil cap with? Thoughts?
It didn't replace the oil cap
Oh is that event still a thing I’m not too far from there and need to check it out almost done with my truck!just wheels and tires left!
Yes first Sunday of every month
Nice work!!. I’m doing this with mine. Now, where did you get the caps?.
Autozone
Thank you.
Old video but I just did this, did you have any issues with it has it ever blown oil all over your engine bay?
No issues at all
What are those gauges in your engine bay measuring?
Fuel pressure gauge
Did this on my 15 cummins. Had oil all over the place in a week. Not sure if the hemi is different or what, but that filter wound have to be cleaned fairly often. What happens when you do that and it plugs up? Crankcase issue? Food for though.
Haven't had any issues at all
How often are you having to clean the filter and do you smell oil when it's time to clean or at all.
I have never needed to clean it yet.
@@FrostbiteRam Mine is 04 durango 5.7 hemi stock air box the oil went in and ate a hole in my filter, not to mention fouling my plugs. Should have been a recall.
@@MrCsebike damn 😬
well tried this on 2013 1500 ram and caused low oil pressure code to keep popping up. With the tube connected to mopar air filter at idle would be 37 then did this mod and oil pressure was only at 24 would not recommend ,too bad liked the louder wooshing sound and whistle from smaller filter on it
Something must be wrong this has no effect on such.
@@FrostbiteRam well i changed it back and my oil pressure on my dash cluster reading back in 37 on up again nothing done except changed back to mopar filter and tube not dissing and dont know why its affecting my truck like that but just giving heads up to watch ur oil pressure while doin this mod
Shout out to my fellow Georgian Canton here ..... btw would that tube be the pcv to intake manifold tube ?
I believe so yes
@Mopar Motorsports i broke my tube when i removed the intake manifold to get to the vvt sensor underneath
Very cool
Wouldn’t the pressurized air blow out of the little filter ? Or does it no longer exit through that way due to being disconnected from the air intake ?
It's not intake feed its crankcase
I haven't got a catch can, would this give me problems in the future? Thanks in advance
No it shouldn't been good to me so far.
@@FrostbiteRam thanks for the reply 👍🏼
Go for it, only benefits to installing one especially in my Subaru wrx Sti! A oil catch can does require maintenance but if you install an air oil separator you don’t have to do regular maintenance
I would not do that looks better but it's not good for a daylight driver. Messed up my pvc valve and map. Started idling rough also. After about 6 months of driving. Had to change about three or four sensors and totally do a hard reset on my PCM to erase all the bad codes and oh not to mention how to place my catalytic converters and O2 sensors also I would not recommend it Lee's trucks computers have too many issues already
Hi what nitrous set are you running
Nitrous Express kit
Hopefully you’ll still respond but my hose was broken and leaking oil is thay normal?
Probably time for a new crankcase filter
If the parts were old to begin with then yea. New parts will hold for a long while
Is it washable, or do you need a new one when it gets dirty?
You can clean it like a k&n
Cool thanks👍 Nice vid too dude
Whats that guage u got next to thw solenoids
Fuel pressure
Hi, can I get that for a 2004 ram hemi??
Pretty generic may work.
Where you get the caps from?
Autozone
Any auto store. I just did this very mod today and im satisfied. No check engine light
My truck recently started getting oil in my air filter, I checked my pcv and it is good. Do you think this mod will help that issue? Or is it something else causing it? I appreciate any advice. Thanks
How many miles
@@FrostbiteRam it's a 2010 but I only have 56k on it.
@@FrostbiteRam have muffler delete and had a cold air intake but switch but to stock air filter due to the oil
@@joe425851 this mod really won't help that. But oil shouldn't be getting to the filter. Possibly over filled with oil?
@@FrostbiteRam that's what I was thinking. Had no issues until I got a oil change last week. You know the dealer will never admit they messed up.
Is just for costmetic seems like another way to go instead of a catch can
Yup that also works
@@FrostbiteRam sweet I know my next upgrade. Keep up the channel you and incredible hemi rock
@@steves8355 thanks bro🤙definitely trying to put some good mopar content out for you guys
@@FrostbiteRam you are bud. Very entertaining. Keep it up. From Arizona we enjoy it
Bro are you wearing safety sunglasses? And thats not even the good ones. Safety first! PPE is a must. Keep up with cool mods we appreciate it.
Yea lol I lost my sunglasses so was rocking them for the day🤣
I rock those every day. Cheapest sunglasses I can buy!
How did you mount your nitrous noids
Mounted them to the throttle body bolts with a standard bracket for each one.
Frostbite Ram thanks and keep up the sick work
@@skylergaitan thanks,definitely will🤙
What do I do w the extrac hole
well the end of the bretear hole to the intake do I leave it open thanks for replying bro 🙏
Is there any benefit? Or just aesthetic?
Just for looks really,cleans up some of the engine bay of the tubes and so forth.
The factory setup sucks hot, oily, humid crankcase air back into the intake. They do this to meet EPA regulations. Old cars used breathers, like the one in this video, to vent that nasty air out into the atmosphere.
@@OddTimeMan wrong. This is the intake side, not the Pcv side. Pcv hose runs to the TB. You'd need a catch can for the Pcv side
Does that work for the 2006 Dodge Charger?
Not sure but they probably have a kit.
@@FrostbiteRam thank you again
i made a custom ceach can i made for that breather.. following blowbye
Awesome
Can u send me link of the parts bro
The part number is the video I dont remember what it was. I bought it from Autozone
how many miles before you change it?
You can clean it like a kn
@@FrostbiteRam thank you, great video
What's the benefit of doing this, looks cool but just not sure what it's for lol?
Gets rid of the big tube going to the filter box.
Stops oil blow-by from gunking (technical term.. LMAO) from building up in engine.
Reason car companies say it's there is to improve fuel milage and reduce emissions. Makes sense untill it gunks up all your intake. Makes car companies more money doing repairs (cleaning crank case gunk) oil catch cans are sort of a happy medium I think.
Thanks to everyone for the reply!!
Where is your oil Catch Can ?
Not running one currently
Breathing much hotter air and increasing chances of water/dirt intake.
But the Hemi will be breathing hot air from the engine
Nope
What size is the cap?
Do you really think the people watching this need such a thorough explanation? For example the purpose of the cap at the air box?
Nothing wrong with being detailed some people don't know anything about this stuff🤷♂️