WARBIRD hits the Hub dyno and we check out the VL Commodore and its go fast goodies
Вставка
- Опубліковано 2 жов 2024
- With the VL Commodore now well and truely cut up and all the go fast goodies coming, we thought it was time to do a trip to fill you in on the build.
First stop was DANDY ENGINES to drop off WARBIRD, After Frank and the team gave the engine a well deserved rebuild..
Then it was off to PSIDUP, the team have been flat out working on the rear end of the VL Getting it ready to handle a 6-7sec quarter mile pass.
After checking out the VL we headed to QUICKBITS to meet up with Sticks, who is suppling the Turbo and fuel system to help push us to that goal.
We then headed off to Higgins Heads to meet with Nathan and Paul from Paul Turner Race Engines.
Wished Warbird was still here to run against! Someday we will there on its home turf 🤘🤘
Can't wait for you bunch of champions to come over,till then, kill those tyre's mate
And I'm not surprised besides toast and Killa B, your truck looks like it came from Australia. Good job on that truck.
youre welcome anytime mate
It needs to happen !!
We need to make it happen mate! Side by Side burnouts would look sweet!
2:57: air pressure coming out of the exhaust literally whiting the LCDs out. Mad stuff 😮
I can't wait to see it on the pad ! Hell yeah 💪
Great content thanks for sharing
Wish Warbird was in the states, but the spirit lives on here! It's been a huge inspiration for some fantastic burnout machines here and I just can't get enough!
This is mad. Big Baz looks like a kid in a candy store lol. Absolutely loving watch this come together. Great video, keep ‘em coming!
Seeing war bird In the trailer made me think of Cletus jumping in and going for a drive down the street 😂
You've certainly gotta good crew of workmanship there, plus see the Rottler machines at Higgins as well, you know it's quality when you see those machines working..
I miss Warbird!! Need another tour in the states!!
When did Baz get onboard? I must of missed a couple of episodes. Love it. Can’t wait to see the VL on it’s first run.👍
Those poor dyno monitors looked like they were about to lift off
😂 theyre some solid units
Kinda annoys me when people sit on cars.
22:58 "he better" :D don't upset Baz :D
Old CLEETER and JACKSTAND will be watching closely no doubt
Yeah. Well they know now not to rev them to the moon
Yeah I think Jackstand took Kill A Bee literally.
@@tighematthew u realize there's Rev safeties in the tune on killa b, and Ben no gas is the 1 who put the tune on killa b right? Not 2 mention then have a yellow, blue. Or red light they follow when they r doin the skids. Ur comment is u talkin a little putnya backside
@@chatta6013where is Ben? He not building engines for these guys anymore?
@@chatta6013 well if you watched cleetus video he even said they reved it to high because it wasn't hooked up. Maybe get your facts right before you go all keyboard warrior 👍
good god is that barry hall
Yes it is mate
HELL YEAH BROTHER let's go my favorite down under channel
I watch every episode and am happy you made a great bit of content here rod shop! Could have made this 2 episodes but happy either way keep it up
war bird is a legend now I miss seeing it here in USA I never got to see it in person but maybe someday ya all can come over and do what ya wanted to in the start come here and blow some tires off ausie style ..godless
send cleatus 1 or 2 for killa bee ..and toast as well as the blazer lol ..but as i said in other comments ya all need go to usa to freedom factory and do what ya set out to do back then cause the warbird became a legend whith one hell of a story ..godbless
Radial brackets! Dude just hit puberty, haha he still knows 10 X what I do but it was great
Two bad arse cars. Awesome content good to see the way that you have to set up your car.🇦🇺👍🤙
Ohh yeah I love hearing warbird I still love that sound and have a good one mate.
lookin like a killer Build !! were currently wrapping up our Dart 331 build with a 76mm turbo for our Mustang Foxbody project . Keep up the great work .
So glad Cleeter sent it home in one piece, maybe now the boys will start doing regular maintenance on killa bee seeing how it went nope at their last event😢😢😢
It was sad to see Bee sold off but I doubt cleet will do regular maintenance on it as he should of in the first place
It's Motorsport mate, No engine is safe. I'm sure Cleetus and the crew had been doing everything Benny and Steve told them to do.
@@CastlemaineRodShop1976 yeah they said they were constantly changing oil, but James clearly didn’t drive it like they were told to, he drove it like a junkyard LS.
2mins and 20seconds of high revs even riding limiter repeatedly, especially in the last 40 seconds. Almost found it painful to rewatched the full unedited run just now.
James isn’t the only one at fault tho. Both of them should have picked up on it running differently, they’ve had it long enough and have a lot of experience with DA effecting tunes.
It’s all down to experience tbh, an engine and car at that level is literally running on the edge, so any part of it that’s not perfect is a massive risk.
the driver cannot afford to be careless.
That being said, It makes great content and I have no doubt that Cleet will have it fixed asap. Unlikely he will repeat the mistakes that contributed too
@@brad.979. killa bee is dead blow up last burnout
@@allout-we7tj i saw that
Barry Hall.... hahaha. Wonder how Brent Staker is these days.😂
Grouse! 🤘😎
Dam.. That looks like its trying really hard to flip itself over backwards on that dyno the way that nose pulls up and I am only 3 minutes into the video! At least you guys set valve lash. Ole Cleeter decided to skip that step and probably a few other things the day before a burn out competition and they killed Killa Bee pushing a rod out the bottom.
CNC matching really has revolutionised engine building hasn’t it. Awesome work guys. Love the updates. Was that a billet Barra in a falcon at PSIdUP
Talk about a host of some of Australia's very best, frank, psidup, Higgins and Castlemaine... the man must be splurging 🤣💰💰 this is gonna be an animal.
Wow wow wow that's amazing all them billet and machined engines so cool great video
So what are we looking at? 250k to go 6.9 I dunno I think anyone could achieve that
Sound was fine my end
Miss Marc and Steve and Ben on the channel
What happen to them
Marc needed a change and Left the shop around a year ago to spend more time with the Family and pursue a different career.
Where’s Ben Nogas is he not doing your guys engines anymore
He isn't doing any these days, he now has a totally different business these days, far from the Automotive industry.
remember the days when a rod shop sold you a kit and would fit it as well,miss them days.
Baz is an absolute legend
Barry hall has to b related to barnaby joyce. The tomato bros
why don't we see Marc anymore
Marc needed a change and Left the shop around a year ago to spend more time with the Family and pursue a different career.
What happened to the Nogass big blocks?
Higgins heads are the bizzness. Not a lot can be done to improve the flow
How do you have a chevy truck I thought they didn't sell them down under
They sell them here, they are just super freakin' expensive. They get imported as Left hand drive, converted to right hook locally (We use the Canadian market cluster pack I believe).
They run into the AUD$100k range depending what trim pack you get.
@@scraverX they're not much cheaper here in the states you can spend up to 100k depending on what package you get
@@patricklaughrey8727 yeah, here in Aus the 2022 model 1500 Starts at like aud$125k. LTZ is closer to aud$140k
No please! I love hearing Warbird, that car is my spirit machine.
Love a budget build.
Great work guys. 👏
Where"s marc these days..
Marc needed a change and Left the shop around a year ago to spend more time with the Family and pursue a different career.
💪🏾
You guys split from Benny running your engine program?
Benny is a busy man, the car had sat for way to long and we couldn't keep it in the corner any longer.
@@CastlemaineRodShop1976 are you guys going to rebuild killa bee?
@@dukenukem7183 not sure what Cleetus and James have in mind mate
@@CastlemaineRodShop1976 thanks for being active in the comments mate had a quick geez and all my questions where answered 😀
@@benrozema8007 no problem mate, thanks for watching!
Ferrari sounds?
Hopefully we can spend a little bit more time on the Torana now.
What happened to ben nogas working on the engines?
Benny is a busy man these days mate, Has a business to sort out and got a baby on the way.
Happy Thanksgiving
America definitely loves warbird and Australia
I can let you in on a little secret mate.......
We love America just as much as you love Australia.
👍lads
You guys WILL get that VL in the 6 second range, I can feel it!!:) Thank you for the update!
Awesome
Is that Barry Hall?
Yes it is mate.
👍👍🔥🔥
Putting the puzzle together nice work all involved.
👍👍
At 1100hp is that warbird turned down?
Has more in it mate but it should be enough to get the job done.
Should have just enough torque to turn the tyres in top gear 😂
@@cheapcharlie7 Only Just.. lol
Any motor that is not a big block is wrong for 6s
Let’s hope your wrong about this mate. Time will tell.
Part Porn right here…..😂🤣😂