Thank you! For who also like this video and would like to fellow the steps, here is the time log: 0:36 Part 1 Steering 40:57 Part 2 Frame 1:08:50 Part3 Tyre 1:46:50 Part 9 Front tyre 1:48:14 Part 4 Sprocket with pedal link 2:02:12 Part 5 Seat 2:25:22 Part 6 Inner chain 2:32:27 Part 7 Pin 2:33:17 Part 8 Pedal 2:45:54 Part 10 Bicycle assembly
In my channel I will provide videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. Please visit my channel . Thank you.....
Thank you man for everything, i spent with you last 20 hours, and finally I create a bmx, best part is, I will send this project for my project in "Intro to manufacturing systems" . Best of all
Bro u are a legend this is my first time getting a video which really has everything from start to end when its so huge and complex task .... Thanks bro Love u bro
00:00:35 Parte 1 - Horquilla y manubrio 00:40:57 Parte 2 - Chasis 01:08:49 Parte 3 - Llanta delantera 01:48:13 Parte 4 - Pedal y Plato 02:02:12 Parte 5 - Asiento 02:25:22 Parte 6 - Cadena A 02:32:29 Parte 7 - Cadena B 02:33:16 Parte 8 - Pedal 01:46:50 Parte 9 - Llanta delantera 02:45:54 Parte 10 - Ensamble #RodrigoQuisman
For those stuck at 1:50:00 about the lofted boss/base feature here's what to do: For some reason SW won't let you created the lofted boss base because the 15mm spline diameter is too small, increase it to 20mm and you'll be good to go :)
wits forever i want to install solid work software could you please send me the crack or registered solidwork software setup . or whatsapp me linkn please +923480007588
as usual great work .. keep on bro .. I have a suggestion which may help us as learner, I wish that you 1- Upload the whole project after you finish it and save it so we can check it closely and compare your work with ours . 2- Upload the figures with dimensions photo, so after watching your video we will try to do it alone without depending on the video or until we stop in a point we will go back to the video. Another benefit of uploading the figure dimensions that we have an idea of what you are going to design and we can keep track . hope that you will take in consideration these two suggestion . Thanks a lot
In my channel I will provide videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. Please visit my channel . Thank you.....
Thank you very much. thanks to the tutorial provided, I got a lot of experience. thanks to this video tutorial I can also upload solidworks video tutorials.
sir, i would like to say you a lot of thank you r very excellent teacher and u teach very gorgeous and the way of ur teaching is superb so i request you to upload more videos i find one thing good in ur channel and that os you teach us by speaking thanks a lot i will wait ur next video and i hope you will make a fantastic video for us
00:00:35 part 1 - Steering 00:40:57 part 2 - Frame 01:08:49 part 3 - Tire 01:48:13 part 4 - Sprocket with Pedal Link 02:02:12 part 5 - Seat 02:25:22 part 6 - inner chain 02:32:29 part 7 - pin 02:33:16 part 8 - Pedal 01:46:50 part 9 - front tire 02:45:54 part 10 - Assembly
As someone who has taught Solidworks to engineering students, I can really appreciate how challenging it is to do a "live" demonstration of a complex assembly like this. That being said, there are aspects of this video that drive me a bit bonkers. Things like punching in very specific dimensions (i.e. for the chain) all over the place, where you don't identify where these numbers come from nor how to derive them. Worse yet, the design is not tolerant of future changes. I MUCH prefer to do this kind of design using feature-dependent in-context relations/mates, such that they automatically align without all the manual fussing you do, such as at the end of the video to make it "look" reasonable (but it's really not on-spot). I also take exception to your bypassing Solidworks complaints by using "bodies" for many of your features. My reaction is "Please, get it right!", so that you don't have to band-aid these aspects, many of which will bite you later in the process. Yes, this is certainly a useful video to watch for beginners, but speaking as an engineering prof and someone who's managed commercial development teams, there's just too much "softness" here for those who really want to know how it's done. So, mixed feelings. You've managed to make an interesting design that LOOKS relatively good. But the underlying models leave a lot to be desired, particularly if future changes are needed. Imagine what will happen if you want to make the bicycle one inch longer. Ouch!
you mean to be more correct in the workflow? im trying to learn inventor or solidwork, this one is good, but doesnt really get me exiting, can you show me aother channel with a good workflow and some additional exitement?
I went from knowing next to nothing in solidworks to knowing a lot of things. Still disappointed about the real animation of chain. But I learned a lot, thank you for this video, really appreciated
Very good video - thank you for sharing! Did you follow a reference design so that you would know all of the specific measurements or were you just very lucky that it all worked out?
looks pretty nice, and enough information to actually learn something here and there. But, as i am a bit OCD (and sure i am not the only one here) iit realy pains me to see the under defined sketches. which is also the reason why i barely finish any of these tutorials.
I also have the best tutorials on my UA-cam channel called Mt Engineering which is on CATIA and solid works, stress analysis, motion analysis, part drawings, assembly drawings. So if anyone else who is interested in this checks out right now
@@apingpoldo7074 the video is perfect for you chinese. determined with this terrible construction, you build any gaps in your holes and you try to sell here with us
the Tutorial shows good some function of solidworks. Its good to make a model of something. Only i must say that the design systematic horrible is. Nobody should design something that way that needs to be fabricated. In my job as a mechanical designer i see it all the time the lack of design systematics.
@@slyztercoreveanged3175 : one big thing is that you design with fabrication in mind. Also think ahead what features and dimensions could change. Design that way that changes are easy and does not blow up the design. Also all sketches that get made need to be full defined.
@@rayjan7996 so what u mean is, when we design..every part is meant to comply with fabrication limit right? I know most of the time fabrication and architect always in argue because architect want to make design that is nice, but fabrication will argue how hard to build it. So when we design something in solidworks or any other CAD, make the parts and design within fabrication limit of your workplace or for diy within their capabilities to fabricate. Is that what you mean?
@@slyztercoreveanged3175 basically that is correct. I know it is always a balance between how it shall look and how it is possible to fabricate. For example in this video it is modeled up only for presentation. Lots of parts he modeled up should be assemblies because that's what they are. Also he models quit a few parts that are purchase parts, like bolts and nuts. Like I said, for presentation purpose it's ok, but not for real design for fabrication. but what's wrong even for presentation is how he made some "parts" by extruding first a big block but than cutting away big portions again and later add material again by new extrusions. that makes a part very difficult to change later especially by a different person. There is so much that should be avoided while designing that someone could make lots of tutorial videos of it.
as always, awesome intro, awesome video, I haven't watched all of it yet, but definitely will as I want to do it in SW myself, but maybe just to make it look more realistic and more difficult maybe add gears and levers on handlebars and run some cables, and/or hydraulic hoses, maybe I will try it myself ;) Like a upgraded bmx :D Keep up great work :) P.S. you could probably make video part 2 called upgrades for bike and just do that :)
still, really great video. I mean sometimes when I want something to look really nice/realistic. you could literally spend hours just working on brakes or handlebars let's say. Definitely awesome job, thumbs up ;)
Do you know how to calculate the amount of torque required to move the follower? Even if we use F*R, the value of R keeps on changing because the distance from the point of contact of the cam on the lever to the base circle centre is not constant. Does this mean torque is not constant?? Please i need some help on this!
Where do you get the dimensions from or how do you know the dimension will fit when joining 2 parts? Are the dimensions arbitrary on how the user wants the scale for?
In my channel I will provide videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. Please visit my channel . Thank you.....
Sorry for my English: Thanks to you and your varied, clear and complete tutorials I am learning Solidworks. It would be impossible for me without your tutorials. I want you to ask how do you get those shadows on metal parts. I only see Gray color even choosing metal materials. I Have Solidworks 2017
For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.
A question regarding the 3D sketch (1947 of this video), which command is given to transform the point-to-point dimensions to Cartesian dimensions, was there any command on the keyboard? Could you teach?
im i the only one who is having problem making sweep boss/base at 9:08? why is my sweep horizontal at bottom and yours is not? please someone reply back soon
You are a great teacher and shows everything in a simple and methodical way- I like to know if you can help me create a library feature of my logo cut inside the ring (jewelry), in old Sledworks I was able to create logo library features easily, but now when I create it does not create the logo cut in like 14kt, 18kt, Platinum and my company name, as library features are not been able to create ,the error message is the some features are absorbed in the model, even if I create parts that are just sketches on plane are not been able to be crated as library parts or features- any suggestion?
Hi.thanks for your labour.i have a problem.i am using solidworks 2018 .i can't find "motion analysis " in list.There are only "basis motion " and "animation" . How can i obtain this command ? Can you help me ?
![Как создаются Микрочипы? Этапы производства процессоров [Branch Education на русском]](/img/n.gif)
Thank you!
For who also like this video and would like to fellow the steps, here is the time log:
0:36 Part 1 Steering
40:57 Part 2 Frame
1:08:50 Part3 Tyre
1:46:50 Part 9 Front tyre
1:48:14 Part 4 Sprocket with pedal link
2:02:12 Part 5 Seat
2:25:22 Part 6 Inner chain
2:32:27 Part 7 Pin
2:33:17 Part 8 Pedal
2:45:54 Part 10 Bicycle assembly
thank you! I just fisnished all the 3h process. I love your method, very clear for beginners :)
In my channel I will provide videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. Please visit my channel . Thank you.....
@@solidmaster7923 ooll l ll l lo l l. oo
@@solidmaster7923 ooll l ll l lo l l. oo
Thank you man for everything, i spent with you last 20 hours, and finally I create a bmx, best part is, I will send this project for my project in "Intro to manufacturing systems" . Best of all
😮
Bro u are a legend this is my first time getting a video which really has everything from start to end when its so huge and complex task .... Thanks bro Love u bro
00:00:35 Parte 1 - Horquilla y manubrio
00:40:57 Parte 2 - Chasis
01:08:49 Parte 3 - Llanta delantera
01:48:13 Parte 4 - Pedal y Plato
02:02:12 Parte 5 - Asiento
02:25:22 Parte 6 - Cadena A
02:32:29 Parte 7 - Cadena B
02:33:16 Parte 8 - Pedal
01:46:50 Parte 9 - Llanta delantera
02:45:54 Parte 10 - Ensamble
#RodrigoQuisman
thank you
thankyou for making my life easy.
For those stuck at 1:50:00 about the lofted boss/base feature here's what to do:
For some reason SW won't let you created the lofted boss base because the 15mm spline diameter is too small, increase it to 20mm and you'll be good to go :)
Thanks bro
29:11
Thanks brother
your tutorial helps to get A+ in CAD lab..I am really grateful...
Thanks a lot..🙂
This is the first time that I see your works. Really it makes me to master CAD CAM easily. Thank you Dr
wits forever i want to install solid work software could you please send me the crack or registered solidwork software setup . or whatsapp me linkn please +923480007588
Thank you so much I completed whole project with your help
Hy vọng hai ae sẽ mãi đồng hành cùng nhau để kênh luôn luôn có những điều thú vị hơn cho mọi người cùng xem. video chất lượng tốt đấy cố gắng phát huy
as usual great work .. keep on bro .. I have a suggestion which may help us as learner, I wish that you
1- Upload the whole project after you finish it and save it so we can check it closely and compare your work with ours .
2- Upload the figures with dimensions photo, so after watching your video we will try to do it alone without depending on the video or until we stop in a point we will go back to the video. Another benefit of uploading the figure dimensions that we have an idea of what you are going to design and we can keep track .
hope that you will take in consideration these two suggestion .
Thanks a lot
can u send me your project on my email ?
@@julienantoun9931 how's your progress after a year?
@@pranavthaware1417 done it 1 year ago
In my channel I will provide videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. Please visit my channel . Thank you.....
Solidworks is amazing software, but you should also Checkout my playlist in Fusion 360.
Many Thanks for this! It is appreciated.
Thanks for this video .. I made it watching it .. And it was owsm tutorial .. I made it exactly like it
Awesome Sir. Thank you so much for your effort. Learned a lot. Great.
Waaooow🤩.....i am very grateful to the fact that u exist sir........just from this mini model, I got to learn a lot🙌👌
Thank you very much. thanks to the tutorial provided, I got a lot of experience. thanks to this video tutorial I can also upload solidworks video tutorials.
sir, i would like to say you a lot of thank you r very excellent teacher and u teach very gorgeous and the way of ur teaching is superb so i request you to upload more videos i find one thing good in ur channel and that os you teach us by speaking thanks a lot i will wait ur next video and i hope you will make a fantastic video for us
00:00:35 part 1 - Steering
00:40:57 part 2 - Frame
01:08:49 part 3 - Tire
01:48:13 part 4 - Sprocket with Pedal Link
02:02:12 part 5 - Seat
02:25:22 part 6 - inner chain
02:32:29 part 7 - pin
02:33:16 part 8 - Pedal
01:46:50 part 9 - front tire
02:45:54 part 10 - Assembly
As someone who has taught Solidworks to engineering students, I can really appreciate how challenging it is to do a "live" demonstration of a complex assembly like this.
That being said, there are aspects of this video that drive me a bit bonkers. Things like punching in very specific dimensions (i.e. for the chain) all over the place, where you don't identify where these numbers come from nor how to derive them. Worse yet, the design is not tolerant of future changes. I MUCH prefer to do this kind of design using feature-dependent in-context relations/mates, such that they automatically align without all the manual fussing you do, such as at the end of the video to make it "look" reasonable (but it's really not on-spot). I also take exception to your bypassing Solidworks complaints by using "bodies" for many of your features. My reaction is "Please, get it right!", so that you don't have to band-aid these aspects, many of which will bite you later in the process.
Yes, this is certainly a useful video to watch for beginners, but speaking as an engineering prof and someone who's managed commercial development teams, there's just too much "softness" here for those who really want to know how it's done.
So, mixed feelings. You've managed to make an interesting design that LOOKS relatively good. But the underlying models leave a lot to be desired, particularly if future changes are needed. Imagine what will happen if you want to make the bicycle one inch longer. Ouch!
you mean to be more correct in the workflow? im trying to learn inventor or solidwork, this one is good, but doesnt really get me exiting, can you show me aother channel with a good workflow and some additional exitement?
@@PlegakPleguk He is referring to design intent.
Oldie, but goldie!, thanks man!
You are the Best, thanks for teaching your knowledge
I went from knowing next to nothing in solidworks to knowing a lot of things. Still disappointed about the real animation of chain. But I learned a lot, thank you for this video, really appreciated
Thank u ! Nice draw and assembly.
Teşekkürler hocam sayenizde proje ödevimi tamamladım
Nice work, really helpful for the learners like me. keep up.....
nizam deen Thanks,
Very good video - thank you for sharing! Did you follow a reference design so that you would know all of the specific measurements or were you just very lucky that it all worked out?
looks pretty nice, and enough information to actually learn something here and there. But, as i am a bit OCD (and sure i am not the only one here) iit realy pains me to see the under defined sketches. which is also the reason why i barely finish any of these tutorials.
Hast du absolut recht.
Etase
Sir jee you are champ 💜💜💜
Thanks for this tutorial 💚
Thank you very much sir, very good tutorial
Really nice. I did it and had really much fun and learn a lot. Thanks you
You are so good in solidworks 👍🏽
Thanks Vishal,
Amazing tutorial. Thank you so much! ✨🤩
I also have the best tutorials on my UA-cam channel called
Mt Engineering which is on CATIA and solid works, stress analysis, motion analysis, part drawings, assembly drawings.
So if anyone else who is interested in this checks out right now
Thanks ... I wanted this one most
welcome, please share our videos which is help us to do more and more in Solidworks thanks,
REALLY AMAZING TUTORIAL SIR..THANK YOU SO MUCH
Your tutorials are excellent. Thank you. They are so helpful.
Thanks for your guiding! It's wonderful!
于雁磊 ttghyyytv5
@@apingpoldo7074 the video is perfect for you chinese. determined with this terrible construction, you build any gaps in your holes and you try to sell here with us
the Tutorial shows good some function of solidworks. Its good to make a model of something.
Only i must say that the design systematic horrible is. Nobody should design something that way that needs to be fabricated.
In my job as a mechanical designer i see it all the time the lack of design systematics.
dont care virign
can i knoiw what is the lack of desing systematics in this? sorry i just try learning solidwork for hobby..hope you can help me clarify
@@slyztercoreveanged3175 : one big thing is that you design with fabrication in mind. Also think ahead what features and dimensions could change. Design that way that changes are easy and does not blow up the design.
Also all sketches that get made need to be full defined.
@@rayjan7996 so what u mean is, when we design..every part is meant to comply with fabrication limit right? I know most of the time fabrication and architect always in argue because architect want to make design that is nice, but fabrication will argue how hard to build it. So when we design something in solidworks or any other CAD, make the parts and design within fabrication limit of your workplace or for diy within their capabilities to fabricate. Is that what you mean?
@@slyztercoreveanged3175 basically that is correct. I know it is always a balance between how it shall look and how it is possible to fabricate. For example in this video it is modeled up only for presentation. Lots of parts he modeled up should be assemblies because that's what they are. Also he models quit a few parts that are purchase parts, like bolts and nuts.
Like I said, for presentation purpose it's ok, but not for real design for fabrication. but what's wrong even for presentation is how he made some "parts" by extruding first a big block but than cutting away big portions again and later add material again by new extrusions. that makes a part very difficult to change later especially by a different person. There is so much that should be avoided while designing that someone could make lots of tutorial videos of it.
Thanks a lot for the lesson, You're awesome
man this is some nice work. thanks
Guys Welcome to our channel 😍
as always, awesome intro, awesome video, I haven't watched all of it yet, but definitely will as I want to do it in SW myself, but maybe just to make it look more realistic and more difficult maybe add gears and levers on handlebars and run some cables, and/or hydraulic hoses, maybe I will try it myself ;) Like a upgraded bmx :D
Keep up great work :)
P.S. you could probably make video part 2 called upgrades for bike and just do that :)
true its not close to realistic just a toy i wish to do more realistic projects in future,
still, really great video. I mean sometimes when I want something to look really nice/realistic. you could literally spend hours just working on brakes or handlebars let's say.
Definitely awesome job, thumbs up ;)
SENCILLAMENTE WOW, ESPECTACULAR,EXCELENTE GUIA, GRACIAS POR SU APORTE
You are so awesome. I like all of your tutorial videos. Learing of your videos improve my design thinking skills and drawing skills. Thanks a lot.
i cant describe my admiration to you because you make me admire solid work
Thanks i hope you enjoyed,
hi,i seen time 19:45 i don't understand way dimention in 3D sketch.how do you do dimention follow x,y,z??
thanks you about tutorial very good!!!
use tab
莊博丞 In the last dimension you have to drag it first.. then add dimension. I faced this problem.
@@jason-fn9fjthank you😢
i like ur videos but i have a suggestion for uh
.. please give us a full dimensions or blueprint
Sir. you are very Professional ....Superb
Exilent tutorial. thanks for your clearly explaining.
please more 3D tutorials
Welcome to our channel, let's learn Solidworks & Catia v5 through complete tutorials !!
Thank you very much, sir!
Thanks you. I did build the bicycle just by looking at you doing it. If anyone wants the drawing, i can upload it.
I need it. Please, do share.
Ye i need, please share
thank you bro. awasome
This looks amazing.
Do you know how to calculate the amount of torque required to move the follower? Even if we use F*R, the value of R keeps on changing because the distance from the point of contact of the cam on the lever to the base circle centre is not constant. Does this mean torque is not constant?? Please i need some help on this!
really nice work to learn me . i am biggneer
Its useful as i am designing an efficycle SAEINDIA component for our team.
Where do you get the dimensions from or how do you know the dimension will fit when joining 2 parts? Are the dimensions arbitrary on how the user wants the scale for?
Arbitrary?🤔🤔
In my channel I will provide videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. Please visit my channel . Thank you.....
Drawings would be helpful! The tutorials are wonderful.
The amount of engineering undergraduates you have saved with this video is gonna be massive
Perfect Assembly
Actually i need the 2D sketch file of this model to practice my own.
will you please give me the details to get that Sketch.
Thanks.
yes i also need for practise
Thanks Bhai, It helped me a lot
Thanks for your video.
Thank you sir, that's great!
thanks for sharing.
Wow you are a master
Very helpful,Thank you 👍👍👍👍👍
Sorry for my English: Thanks to you and your varied, clear and complete
tutorials I am learning Solidworks. It would be impossible for me
without your tutorials. I want you to ask how do you get those shadows
on metal parts. I only see Gray color even choosing metal materials. I
Have Solidworks 2017
For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.
Aksanın beni benden aldı neyse Hayrettin Hocama ve Makinecilere selam
It woud have benn great if the catenaria moved!!
anyway, it is amazing!
very good job
what can I say is only great and millions of thanks for your support
@2:31:06 how you got the direction 1 as sketch 3?? I cant get the whole sketch sir. Please reply
its been pleasure to watch your tutorial sir .god bless u love a lot
Rupesh Wadekar Thanks,
GOOD WORK AND FAST !!
Nice video. Thanks to share
amazing very helpful
Is it possible to fix the chain problem by drawing a guide like 2:31:00 during Assembly?
love your videos
SIR AAPNE VIDEO KE 19:33 MIN PER . HOW TO CHANGED INCLINED DIMENSION INTO HORIZONTAL AND THEN VERTICAL. AAP NE KIS KEY KA USE KIYA. PLZ SIR
Rahul Pal use TAB key in keyboard to change the direction of Dimensions,
Seus vídeos são incríveis! Você pode tentar o nftale?
I wish Rhino can do the rotation of axes for particular area like that! very cool! Thank you for your knowledge
hello, what graphics card do you use in the video?
A question regarding the 3D sketch (1947 of this video), which command is given to transform the point-to-point dimensions to Cartesian dimensions, was there any command on the keyboard? Could you teach?
Exemplary, Kudos
Give concentricity constrain too the start point at 11:21
im i the only one who is having problem making sweep boss/base at 9:08? why is my sweep horizontal at bottom and yours is not? please someone reply back soon
perfect job bro
great effort sir
really awesome video....
it didn't work for me @3:43-5:16, extrude cut is going from center of main part(steering) and cutting it half :(
19:33
How to provide size in "X" coordinate?
press Tab on your kb
@@reviewdao2704 y
is there any other of defining points in space ? for e.g in ansys we can import point coordinates from notepad.
Perfect assembly
Thanks a lot my friend and great work!!!
Excellent work sir.
Bravo dude
You are a great teacher and shows everything in a simple and methodical way- I like to know if you can help me create a library feature of my logo cut inside the ring (jewelry), in old Sledworks I was able to create logo library features easily, but now when I create it does not create the logo cut in like 14kt, 18kt, Platinum and my company name, as library features are not been able to create ,the error message is the some features are absorbed in the model, even if I create parts that are just sketches on plane are not been able to be crated as library parts or features- any suggestion?
keep both version.
Good job.
At 1:51 when you create loft both side it is made but in my pc after one loft the centerline is remove help
Hi.thanks for your labour.i have a problem.i am using solidworks 2018 .i can't find "motion analysis " in list.There are only "basis motion " and "animation" . How can i obtain this command ? Can you help me ?