Well presented with very nice verbal audio enhances tutorial. Thank you for not ruining it with music. I like all your presentations as you very carefully elucidate and don't go too fast. Your disclaimer at end is important (as you cannot really make the rods thru machining, and the threads would never work in the real world as no tolerance would bind and lock). Outstanding presentation on how to model.
This worked for me when creating the Helical and Fillet.(Ben Taylor)"I increased the pitch of the thread to 3.25mm instead of 3mm. I was then able to use the 0.75mm fillet. No matter what size fillet I used (even went as low as 0.1mm) It still kept showing the same error message".
I have seen in the comments that, lot of you have faced issue while constructing the fillet for the thread. You can resolve it by choosing the "face fillet" option instead of " corner fillet ".
Is there any way to "crush" or fold the spring? or any other object? And I don't mean the stress simulation, I really mean a way to animate objects like a spring to fold or something.
if you don't have 'twist along path' you should find a 'specify twist value' in Profile twist and 'Revolutions' in twist control. I'm using the solidworks 2019
16:47 Spring not work in solidwork 2024 ? spend a lot of time and cant find option menu in Sweap Like in the video "Twist along path" . i really need help .I'm stuck here
i could not do also the second fillet.i resolved the issue by selecting the fillet type:face fillet, and after that selecting the 2 faces between the edge that must be filleted
Sir can you please make a video on how to make the spring in shock absorber compress and expand .... Learning from your videos is always awesome thanks sir
when cutting the top edge of the spring using extruded cut (18:00), how did you select the reference geometry or which point did u take as the reference point . When I select the top plane it appears at the center whereas in your tutorial I can see that it appears at the top . Would be really helpful if you could guide me thnks
Hello, sir, you are doing great but there is a problem why are you not providing views of model means if you make any component please provide their dimensions so we can also practise by own.
I am unable to fillet both the edges because it's saying there's an error in the loop, or it is intersecting. I've checked several time there's no error i made ecactly by following your steps. Still i'm unable to fillet. Help.
21:51 , work more in the dimensioning, how could you think the part #4 can be introduced into a Diameter of 24 mm, having the part #4 Diameter of 27 mm ???????
If I'm not wrong, the smaller radius is necessary in order to be able to create the threads using subtraction method. In the end, the diameters will match perfectly since we are subtracting the shapes
I made this project. It was wonderful. I have a question Do you have any tutorial to learn HSMworks or CAMworks? Finally Congratulations, You make nice tutorials.
Sir please reply how to do animation for this just now I finished assembly it came very well ✌ thanks a lot for u sir please say how to do animation for this. Waiting for your reply sir 🙏🙏🙏
The one part came in super small compared to every other part and I have no idea what to do. I went back, did it again and the same thing. It was the part around the 6:50 mark.
sir wats the specification of your pc.?? and sir why dont you use cirular profile for sweep cut even in your sum old video my laptop freezes so i used circular profile instead of triangle nd its this one in jst single fillet of 0.75mm i lappy freezes though recovered bt i am nt able to do 2nd fillet means i cant select both edge at same tym... .my pc lennovo y50 -70 intel i7 4 gen 2.5 to 3.5 ghz 8 gb ram 4 gb nvidia gtx 860m 1tb hard disk
yes i can use circular profile for thread cutting but the design not to close the real view, but its good idea to avoid the calculation load on PC, i am using Workstation laptop with professional graphics card. Dell Precision M4800 Processor : Intel(R) Core(TM) i7-4810MQ up to 3.6 GHz RAM : 16 GB HDD : 500 SSHD Graphics : Nvidia Quadro K1100 2GB
When I apply helix and click normal to there is a little protrusion but yours has no that one . I realize that when I try to place my triangle . It is placed little bit outside of pipe
i am stuck at creating fillet on the thread on the one of the edge of the top rod. @13:44 . bottom edge of the thread has been done. but while doing the top edge its giving me the error. "cannot create a valid fillet/chamfer because either this fillet/chamfered face is self-intersecting or its loop is bad." i tried to make top rod from start 4 times but same issue everytime. can anybody help me with this
Many people face the issue of not being able to fillet at 13.48 as a certain pop up message appears not executing the command.. Solution to it is: Edit the feature of helix/spiral and change the pitch to 4mm
Sir your tutorial is best but I'm not getting that polished aluminum view it's only showing tree that it's applied is there any command to see applied metal view like catia has shading with material view
sir thank you. The way you created spring and female threads of gear in minutes effortlessly is just awesome.
Loved it! I made it and I'm learning so much with you brother. India has many gifted people
Well presented with very nice verbal audio enhances tutorial. Thank you for not ruining it with music. I like all your presentations as you very carefully elucidate and don't go too fast. Your disclaimer at end is important (as you cannot really make the rods thru machining, and the threads would never work in the real world as no tolerance would bind
and lock). Outstanding presentation on how to model.
A true legend in solidworks tutoring.
Never know this software before, the way you teaching very easy to understand, you are the best teacher,,, thanks👍👍👍👍
One of the best solid work tutorial channel on UA-cam.
Sir million thanks. You are doing great job. 👏👏👏👏
This worked for me when creating the Helical and Fillet.(Ben Taylor)"I increased the pitch of the thread to 3.25mm instead of 3mm. I was then able to use the 0.75mm fillet. No matter what size fillet I used (even went as low as 0.1mm) It still kept showing the same error message".
THX
this is what I was looking for.
I've got same error and your suggestion worked, thanks a lot
Tenkx
I had the same problem and your suggestion solved it. Thank you !
Thank you, as a beginner I was wondering where i kept going wrong even after following the tutorial perfectly.
Success Design of shock absorber completed 👍
I have seen in the comments that, lot of you have faced issue while constructing the fillet for the thread. You can resolve it by choosing the "face fillet" option instead of " corner fillet ".
Arnab Mukherjee Thanks :)
still failed.. I have tried to put the size of the fillet to 0.1 mm,, still doesnt work. is there anything i did wrong? thank you
Thanks a ton man
Thank you so much!
Thank you sir
Very helpful tutorial for me and I am learning to much
Is there any way to "crush" or fold the spring?
or any other object?
And I don't mean the stress simulation, I really mean a way to animate objects like a spring to fold or something.
if you don't have 'twist along path' you should find a 'specify twist value' in Profile twist and 'Revolutions' in twist control.
I'm using the solidworks 2019
Thank you
Same problem with me b'coz I'm using 2021
Keep up the great work. Very well explained! You are the best teacher for solidworks!
Thanks for this tutorial with every detail step,good man ，may good luck be with you!
Sir your teaching way is very good👍
16:47 Spring not work in solidwork 2024 ? spend a lot of time and cant find option menu in Sweap Like in the video "Twist along path" . i really need help .I'm stuck here
Thanks! wonderful SOLIDWORKS instructing videos!
ur videos are veryyyyyyyyyyyyy informative of every detailed product.good luck and keep posting new product design.
thanks
i could not do also the second fillet.i resolved the issue by selecting the fillet type:face fillet, and after that selecting the 2 faces between the edge that must be filleted
Dan Staver Thanks,
Thanks man!
That one really worked, thanks!
liked it, i prepare to design it on my channel
what analysis do you make on this element? FEA? load analysis? what machinig procese to make it real?
best tutorials ever.
thank you
Thanks, & you are the most welcome.
Sir can you please make a video on how to make the spring in shock absorber compress and expand ....
Learning from your videos is always awesome thanks sir
sure krushi Kaneria i will try for compression & tension for spring.
Having troubles at 32:00 when I add the spring mate with the nut and top rod it doesnt rotate like yours? How can I fix this issue?
check you did screw mate perfectly , otherwise it will not work, i did screw mate initially .
Interesting tutorial... ❤
when cutting the top edge of the spring using extruded cut (18:00), how did you select the reference geometry or which point did u take as the reference point . When I select the top plane it appears at the center whereas in your tutorial I can see that it appears at the top . Would be really helpful if you could guide me thnks
how did u fix it? same shit
Dear Sir, Once again thank you very much for your effort and your time in helping us, please keep up,
God bless you!
Best wishes to you
With Regards
welcome, please share our videos which is help us to do more and more in Solidworks thanks,
Thank you for these tutorials
can you please show the animation of this shock absorber too?
Wow, these drawing makes my mouth to watering...
i feel you 🤤
Spring Swept not working for 2017 version, what can I do sir??
did u figure it out
good project 👍done it
pure magic, like it
Great Video ! Very instructive in a completely understandable way. Thank you for taking the time to explain this assembly so well.
Great video. thanks alot sir. 🙏❤️
It's the perfect educational material.
Angle 60 degrees not 60mm. Beside a little speeding, it's just a great video. Thanks!
U the best bro
is u got the design from grab cad?
Loved it ! but how did u rotate the part using mouse .. please help me on how to rotate parts
Hello sir
I'm trying to draw this but something happened with me . When you give fillet at the time of 13:20. It's not happening in my drawing.
Check first comment in the chat
100 likes form my side.....grt work sir
thanks.
Yes
Very amazing tutorial sir i really like your tutorial..great work
Sir, how to combine triangle into helix/spiral? I'm very confused help me please, i use solidwork 2017
use pierce option.
Great video. Thanks
sir plz provide all dimesions of a part at a time so that we can practice well.
If you and your PC's pull themselves together then it seems the quite nice work! :) Thanks for uploading! GRT!!!
Hello, sir, you are doing great but there is a problem why are you not providing views of model means if you make any component please provide their dimensions so we can also practise by own.
If Solidworks crashes each time you apply the fillet to the thread, you need to increase your Windows GDI limit.
23:46 unable to print it's showing "cannot use a closed entity for trimming"
Please solve
hocam 16:46 saniyesine kadar kendim de yaptım ama süpürerek katı oluşturma komutu soluk yazıyla görünüyor yani kullanamıyorum şu an . neden?
Sir can u post video on this component by using Siemens na 10 software
wow wow wow you're the best
i wish i could give you 1 million likes
기계원리가 대단하십니다
I am unable to fillet both the edges because it's saying there's an error in the loop, or it is intersecting.
I've checked several time there's no error i made ecactly by following your steps. Still i'm unable to fillet. Help.
Change the pitch as 4mm you will get it 😀
Nice ! Good jobs
Thank you for your tutorial. There is a problem. With Under Defined sketch, it is going to features.
yes its can be features, but better to define all the geometry.
Good tutorial.
sir can u please tell me where u got those dimensions...I need assembly layout.please reply ASAP..
your videos are so helpfull please make more car parts if you can like steering knukle or control arm!!!
21:51 , work more in the dimensioning, how could you think the part #4 can be introduced into a Diameter of 24 mm, having the part #4 Diameter of 27 mm ???????
If I'm not wrong, the smaller radius is necessary in order to be able to create the threads using subtraction method. In the end, the diameters will match perfectly since we are subtracting the shapes
I made this project. It was wonderful. I have a question Do you have any tutorial to learn HSMworks or CAMworks? Finally Congratulations, You make nice tutorials.
Thanks soon i will upload CAM works.
Dear sir I want to document on your project ...Can you share this pdf
Sir please reply how to do animation for this just now I finished assembly it came very well ✌ thanks a lot for u sir please say how to do animation for this. Waiting for your reply sir 🙏🙏🙏
Nice.
can you make some machine that use diesel as a driver?
that can help my education here.
thanks
we can make machine using petrol. can that help your education?
The one part came in super small compared to every other part and I have no idea what to do. I went back, did it again and the same thing. It was the part around the 6:50 mark.
how do you get that reflection on your component
you need professional graphics card in your system like Nvidia Quadro series or AMD firpro Series. other cards will not support real views.
Can't thank you enough..
Very nice!
Sir the dimensions u selected are standard dimensions or not..?
very good
thanks,
Sir what application did you use ?
Спасибо за видео, товарищ!
Thanku very much it is helpful to me
really cool 😎, i have already make this but tips i like. you know many ways you can use one commands
SENSACIONAL! MUITO OBRIGADO PROFESSOR.
excuse me,sir. is that this absorber the same as absorber which used in washing machine (Washing Machine Shock Absorber)?
Professor, you need to limit the travel of the shaft and fix the position of the upper and lower shock mounts. The spring should be able to compress.
How can I do that? I need it
sir wats the specification of your pc.??
and sir why dont you use cirular profile for sweep cut even in your sum old video my laptop freezes so i used circular profile instead of triangle nd its this one in jst single fillet of 0.75mm i lappy freezes though recovered bt i am nt able to do 2nd fillet means i cant select both edge at same tym...
.my pc
lennovo y50 -70
intel i7 4 gen 2.5 to 3.5 ghz
8 gb ram
4 gb nvidia gtx 860m
1tb hard disk
yes i can use circular profile for thread cutting but the design not to close the real view, but its good idea to avoid the calculation load on PC, i am using Workstation laptop with professional graphics card.
Dell Precision M4800
Processor : Intel(R) Core(TM) i7-4810MQ up to 3.6 GHz
RAM : 16 GB
HDD : 500 SSHD
Graphics : Nvidia Quadro K1100 2GB
ok tanx alot sir
Good Work pal!
When I apply helix and click normal to there is a little protrusion but yours has no that one . I realize that when I try to place my triangle . It is placed little bit outside of pipe
Yes same problem
i am stuck at creating fillet on the thread on the one of the edge of the top rod. @13:44 . bottom edge of the thread has been done. but while doing the top edge its giving me the error. "cannot create a valid fillet/chamfer because either this fillet/chamfered face is self-intersecting or its loop is bad." i tried to make top rod from start 4 times but same issue everytime. can anybody help me with this
try to reduce the size of thread it may helps.
I have the same error, but I can’t resolve it 😓
Can spring compression and expansion be possible in solidworks?
Sakthi Engineering karunakaran Chennai Nazarathpet
Many people face the issue of not being able to fillet at 13.48 as a certain pop up message appears not executing the command..
Solution to it is: Edit the feature of helix/spiral and change the pitch to 4mm
thanks a lot
Thank you, it helped me..
great info
Thank a lot. 😂
Thank you sir for teaching us I Am in sixth standard
Please how can I make the metal shiny
is this spring working ?
good job sir
thanks
Hello sir i trying to pierce in part 2 for triangle for swept cut... in pierce mid point not pierce .... please help me for learning that
jaishant kumar same issue here
Which version of solidworks you are using ?
Solidworks2014
good tutorial
Good job man ! Thank you sir !!!!
Thanks.
Nice
great work, your videos are fantastic, greetings from Argentina!
Sir please upload in drawing pdf in your description box, it's very useful for other
Sir your tutorial is best but I'm not getting that polished aluminum view it's only showing tree that it's applied is there any command to see applied metal view like catia has shading with material view
sir , i'm not getting the spring by sweep , the options not have twist along path in 2017 version
it should be there,
yes, is here: OPTIONS. orientation: would Follow path..... Profile Torsion: Specify torsion value.... Torsion control: Revolutions.. 6
Sir ic engine design pannunga sir.
Its very useful channel sir keep going
Can't get twist along path option
Is there any way to get it
Did you convert entities on the circle before doing the spiral function?
Solidworks 2019+ don't have options menu under sweep