This stump bucket works well for me. I think a longer bucket would be easier to see the tip so you could be more precise, but until you attach it to the tractor you are using and can see the actual visibility you won't know. Once I build the channel up to where it is paying for the implements, I will experiment with other stump buckets and other methods for removing stumps. I am going to use the stump bucket this winter on an oak tree stump that is about 20 inches in diameter this winter to see how it handles oak stumps. Thank you for the question, and I hope you have an awesome day!
This is from the online manual as it is a little complicated in the way they rate them.MF 911X Non-Self Leveling • 114 in. (2900mm) Max Lift Height at Pivot Pins • 2,470 lb. (1120kg) Lift Capacity to Max Lift Height at Pivot Pins • 1,500 lb. (680kg) Lift Capacity to Max Lift Height, 31.5 in. (800mm) Forward of Pivot Pins* • 3,090 lb. (1400kg) Lift Capacity to 59 in. (150mm) Lift Height at Pivot Pins • 2,160 lb. (980kg) Lift Capacity to 59 in. (150mm) Lift Height, 31.5 in. (800mm) Forward of Pivot Pins* *Based on bucket weight of 330 lbs (150kg) Thanks for the question and may you have an awesome day!
What was shipping like from Amazon on the bucket? Did they have to deliver it via frieght? I want to get one but a tractor trailer could never make it up my driveway. Thanks
I ORDERED from Amazon. Not next day but well within two weeks. Delivery was free - as a Prime member. Tailgate delivery was good. I used my clip on bucket forks to get it off the truck although the delivery was able to get it down to the ground if needed.
The Titan attachment was delivered via semi and I just had them stop at the end of my driveway so I could unload it with the forks. Thanks for your comment.
You know, if you would utilize the RPMs of the engine to increase your hydraulic flow, you would have more force against the stump. Running the tractor at idle and using the linked pedal is not doing you any favors from an efficiency standpoint.
Thank you for the information. I will do that on my next stump. I have about a 20 inch oak that came down this summer I am going to work on this winter.
SSQA worked perfectly on my LS XJ2025 diesel tractor less than 5 minutes to get the bucket off the deliver truck and onto my tractor Stumps come out of the ground almost magically Big stumps and roots maybe 5-10 minutes Finished 5 acres of brush stumps (50 + stumps most with 3-5 inch stumps and up to 16 foot roots in 3 hours Saved over $1,200 in fees for stump removal to be able to till the field
Thanks for the information. I had never heard of Jenkins Iron and Steel before and their stump bucket looks like it would have more leverage than the Titan. I like that they are made in the USA as well. I may have to give one of their implements a try. Thanks again. I hope you have an awesome day!
So, what is your recommendation of the model?
This stump bucket works well for me. I think a longer bucket would be easier to see the tip so you could be more precise, but until you attach it to the tractor you are using and can see the actual visibility you won't know. Once I build the channel up to where it is paying for the implements, I will experiment with other stump buckets and other methods for removing stumps. I am going to use the stump bucket this winter on an oak tree stump that is about 20 inches in diameter this winter to see how it handles oak stumps. Thank you for the question, and I hope you have an awesome day!
What is the lift capacity of your tractor .
This is from the online manual as it is a little complicated in the way they rate them.MF 911X Non-Self Leveling
• 114 in. (2900mm) Max Lift Height at Pivot Pins
• 2,470 lb. (1120kg) Lift Capacity to Max Lift Height at
Pivot Pins
• 1,500 lb. (680kg) Lift Capacity to Max Lift Height, 31.5 in. (800mm) Forward of Pivot Pins*
• 3,090 lb. (1400kg) Lift Capacity to 59 in. (150mm) Lift
Height at Pivot Pins
• 2,160 lb. (980kg) Lift Capacity to 59 in. (150mm) Lift
Height, 31.5 in. (800mm) Forward of Pivot Pins*
*Based on bucket weight of 330 lbs (150kg)
Thanks for the question and may you have an awesome day!
You could mount camera on front guard and use vr goggles.
Interesting. Thanks for the comment. May you have an awesome day!
What was shipping like from Amazon on the bucket? Did they have to deliver it via frieght? I want to get one but a tractor trailer could never make it up my driveway. Thanks
I ORDERED from Amazon. Not next day but well within two weeks. Delivery was free - as a Prime member. Tailgate delivery was good. I used my clip on bucket forks to get it off the truck although the delivery was able to get it down to the ground if needed.
The Titan attachment was delivered via semi and I just had them stop at the end of my driveway so I could unload it with the forks. Thanks for your comment.
You know, if you would utilize the RPMs of the engine to increase your hydraulic flow, you would have more force against the stump. Running the tractor at idle and using the linked pedal is not doing you any favors from an efficiency standpoint.
Thank you for the information. I will do that on my next stump. I have about a 20 inch oak that came down this summer I am going to work on this winter.
@@matthewrussell5620 That will make that tractor work. Cheers!
SSQA worked perfectly on my LS XJ2025 diesel tractor
less than 5 minutes to get the bucket off the deliver truck and onto my tractor
Stumps come out of the ground almost magically
Big stumps and roots maybe 5-10 minutes
Finished 5 acres of brush stumps (50 + stumps most with 3-5 inch stumps and up to 16 foot roots in 3 hours
Saved over $1,200 in fees for stump removal to be able to till the field
Thanks for the information. I had never heard of Jenkins Iron and Steel before and their stump bucket looks like it would have more leverage than the Titan. I like that they are made in the USA as well. I may have to give one of their implements a try. Thanks again. I hope you have an awesome day!