Ed is the stellar example of an automotive /machinery encyclopedia. His mention here of the "clutch flight" automatics bought back memories of a few drag racers and their cars way back when. I enjoy everything Ed shares he shares. Awesome content !
I could watch this guy talk about flathead and car stuff all day. Even though I understand how clutches work and have worked on hundreds of engines myself and own an old flathead truck, Ed is an absolute treasure.
@@BarryTsGarage You're welcome, and keep that content coming because its fantastic! And people like Ed are wilting fast in the scorching sunlight of the modern car "tuning" scene and its throw-away for the next shiny thing culture. This is real tuning. Worth preserving!
I was considering buying a new clutch but after listening to Ed I would like to take a closer look at the clutch I have. I believe a similar clutch was used way up into the 70s.
I've been a diesel mechanic for over 30 years. I remembered when the (easy pedal) clutch came out, it was a very heavy and double the spring unit. But wow what a difference when you needed to hold the clutch in like you mentioned. You could hold it forever and never got a cramp, it truly was a easy pedal. Great video, alot of people dont understand how those work, but you guy's did a awesome job explaining it. Keep up the great work.
Nice, clutches, there’s a subject that doesn’t come up very often these days. I think it’s been suggested that guys should hang on to their old clutch components, especially if they own something a bit unusual, you don’t want to be unable to drive for want of a clutch.
Yep... Ed remembers those Clutchflights ! I still use a 727 based clutchflight at the dragstrip. [ Fairbanks trans ]. The flywheel is very heavy and needs to be balanced perfectly ! Definitely not a 'street ' type trans . You gotta watch out tho... too much traction and you can destroy parts very easily and quick !
That’s pretty tough, my understanding from Ed is that practically speaking it’s best to just upgrade to a 49 to 53 block which can accept a much wider variety of flywheels, clutches, and transmissions…
Hi Barry I found this video very informative my big takeaway was the spring between the clutch plates. But that clutch flywheel and pressure plate looks exactly like the clutch flywheel and pressure plate from my 1950 Ford 8N tractor it was a 4 cylinder 119 cid and a lot of guys have replaced the 4 cylinder with the V8 and apparently it wasn’t that hard to do a I have even seen videos of a flathead 12 cylinder Mercury engine! But I had to kinda laugh at myself Ed was talking about balancing the clutch flywheel and pressure plate well I had my Ford tractor and I tried starting it and it made a grinding noise and the engine turned over here and there so I said to my nephew you see and hear that the starter is dragging so I got it rebuilt and it costs me $200 well it didn’t solve my problem so upon further investigation I found that the ring gear was spinning on the flywheel when I was trying to start it well this is the part where Ed would have given me a F Grade but I welded the ring gear to the flywheel at 12-3-6-9 o’clock and I tried to keep my beeds the same length and depth and width but like Ed said sometimes you are at the mercy of time and funds but the 8N Ford tractor would probably only rev up to 2200 rpm and rarely at that! 😀🇨🇦
GREAT comment, Keith! You should be very satisfied that you got that starter gear functioning again on that flywheel! Also, I believe Ford did use as many shared parts on their tractor as they could. Some funky v8 (maybe v-12?) customized tractors out there…
I had to fix few mercedes engines which had been converted to manual trans . None were balanced and they vibrated like crazy because the flywheels werent match balaned to the old style Mercedes trans coupler . Two of them flogged out the nain bearings . On one the block crank bore was opened up ,destroying the block and crank.😢😢😮
Ed is the stellar example of an automotive /machinery encyclopedia. His mention here of the "clutch flight" automatics bought back memories of a few drag racers and their cars way back when. I enjoy everything Ed shares he shares. Awesome content !
I agree! Thank you for your support of the channel 🙏👍
I could watch this guy talk about flathead and car stuff all day. Even though I understand how clutches work and have worked on hundreds of engines myself and own an old flathead truck, Ed is an absolute treasure.
I appreciate that! I stop by to see Ed every time I get a chance and it’s my privilege to share some of that experience with you all. 👍👍
@@BarryTsGarage You're welcome, and keep that content coming because its fantastic! And people like Ed are wilting fast in the scorching sunlight of the modern car "tuning" scene and its throw-away for the next shiny thing culture. This is real tuning. Worth preserving!
Barry thanks for sharing Ed with us again I can’t get enough of this guys knowledge.. I hope he knows how much we appreciate him sharing with us.
It’s my pleasure - it’s a treat when Ed makes some time to hang out and enlighten me (us) 😀
What a wealth of knowledge and history. Always enjoy your talks with Ed!
Great!! Thanks for the note!
I sure do love to hear anything that Mr. Ed has to say. He is a wealth of knowledge. Thanks for having him on your program!
I appreciate your feedback! We will do some more 🙏
I was considering buying a new clutch but after listening to Ed I would like to take a closer look at the clutch I have. I believe a similar clutch was used way up into the 70s.
I've been a diesel mechanic for over 30 years. I remembered when the (easy pedal) clutch came out, it was a very heavy and double the spring unit. But wow what a difference when you needed to hold the clutch in like you mentioned. You could hold it forever and never got a cramp, it truly was a easy pedal. Great video, alot of people dont understand how those work, but you guy's did a awesome job explaining it. Keep up the great work.
Thank you. I’ll pass that on to Ed 🙏👍
Nice, clutches, there’s a subject that doesn’t come up very often these days. I think it’s been suggested that guys should hang on to their old clutch components, especially if they own something a bit unusual, you don’t want to be unable to drive for want of a clutch.
Great detail and explanation! Thank you Ed!
Thanks I’ll pass that on to him
The Man Ed is SMOOTH !!!'!!
I agree
I used to drill the side edge of the throwout bearing to install a grease fitting.
I’ll ask Ed or mention your thought… 👍
Yep... Ed remembers those Clutchflights ! I still use a 727 based clutchflight at the dragstrip. [ Fairbanks trans ]. The flywheel is very heavy and needs to be balanced perfectly ! Definitely not a 'street ' type trans .
You gotta watch out tho... too much traction and you can destroy parts very easily and quick !
Great comment! Thanks
ITS THAT YOUNG MAN AGAIN . TELL US ABOUT CLUTCH. VEREY INTERESTING.
Thank you 🙏
Wonderful, thanks.
Thank you too!
How would I change my flathead flywheel to a bigger clutch. Ed is a great guy to share all his thoughts and knowledge.thank you . Sincerely Dwayne
Does your flathead have a cast-in bell housing? (Pre-1949)
@@BarryTsGarage yes it is a 1939
That’s pretty tough, my understanding from Ed is that practically speaking it’s best to just upgrade to a 49 to 53 block which can accept a much wider variety of flywheels, clutches, and transmissions…
Smart man
Hi Barry I found this video very informative my big takeaway was the spring between the clutch plates.
But that clutch flywheel and pressure plate looks exactly like the clutch flywheel and pressure plate from my 1950 Ford 8N tractor it was a 4 cylinder 119 cid and a lot of guys have replaced the 4 cylinder with the V8 and apparently it wasn’t that hard to do a I have even seen videos of a flathead 12 cylinder Mercury engine! But I had to kinda laugh at myself Ed was talking about balancing the clutch flywheel and pressure plate well I had my Ford tractor and I tried starting it and it made a grinding noise and the engine turned over here and there so I said to my nephew you see and hear that the starter is dragging so I got it rebuilt and it costs me $200 well it didn’t solve my problem so upon further investigation I found that the ring gear was spinning on the flywheel when I was trying to start it well this is the part where Ed would have given me a F Grade but I welded the ring gear to the flywheel at 12-3-6-9 o’clock and I tried to keep my beeds the same length and depth and width but like Ed said sometimes you are at the mercy of time and funds but the 8N Ford tractor would probably only rev up to 2200 rpm and rarely at that!
😀🇨🇦
GREAT comment, Keith! You should be very satisfied that you got that starter gear functioning again on that flywheel!
Also, I believe Ford did use as many shared parts on their tractor as they could. Some funky v8 (maybe v-12?) customized tractors out there…
I had to fix few mercedes engines which had been converted to manual trans . None were balanced and they vibrated like crazy because the flywheels werent match balaned to the old style Mercedes trans coupler . Two of them flogged out the nain bearings . On one the block crank bore was opened up ,destroying the block and crank.😢😢😮
That’s horrible! When Ed explained this, I suddenly understood important this balancing work is!