Hello and welcome folks In this restoration I'm restoring a Footprint Pipe Wrench Please Like, Share and Subscribe. #Restoration #ToolRestoration #AntiqueTools
Thanks for watching Dr Hut. I only just got the lathe and that was my first piece. Appreciate your opinion on the thumb screw. I wasn't sure at first but it's grown on me 😁
Thanks buddy yes it took forever, I was thinking it was going to be a quick job. I picked the lathe up last week, don't really know what I'm doing on it but it turned out ok. Thanks for watching 👍
Had to come see what kinda fun you had going on over here or rather should I say Down under Came over from Steve Winkleman aka SLW Restorations I love watching old things come back to life 👍🏻
Thanks for coming over and taking a look Dream Creations, much appreciated. I hope you might find something else interesting in my collection of videos.
Another great restoration, I think every "grandfather" and "dad" had a set of footprints in their toolbox years ago. Mine did lol. Good choice with the hot bluing too by the way.
Thank you Neil that's very kind of you to say. I appreciate you watching and leaving a comment. If you haven't already please consider Subscribing and check out some of my other projects 👍
Thank you so much Longhorn that's very kind of you. Yep I liked the shiny also, I just thought at the time it needed something different. I think I got that bit wrong 😁
I agree mate. I prefer shiny however the work put into that Footprint Wrench was phenomenal. I ‘be done a couple of those myself and they can be deceptive in how much work is involved.
@@shedmanx3640 Your spot on Shed Man. I picked this project because I thought I might be able to get it done reasonably quickly, boy was I wrong. Thanks for watching 👍
Thanks for watching xivanovandreyx. I did consider that, it would probably disguise the remaining pitting. Might still do it. Appreciate your comments 👍
Hey thanks for watching and leaving a comment GBL much appreciated. Please consider Subscribing if you haven't already and check out some of my other projects 👍
Thanks Magdad 😁 I didn't even know it should have a thumb screw till I watched your restoration of the same thing. I was lucky I managed to pick up an old lathe after starting on it.
The blues a nice contrast . Nice machining of the screw , wonderful finish , great to see the teeth come up like that . Shame you didn't polish inside the handle 🤣🤣🤣🤣🤣🤣👍👍
Thanks for watching Jim. I did hit the inside with the mini wire wheel but I forgot to record that bit. Looking at the video now though it doesn't look that clean 🤪 thanks for the pick up 👍👍
Thanks G-Restoration I appreciate you watching. The new lathe is an old lathe. Still needs a bit of work. I haven't been on a lathe in over 30 years so I need to learn.
Thanks for watching and commenting Brian, much appreciated. I'm undecided now, some like it and some don't. Maybe I should blue the whole thing. If you haven't already please consider Subscribing and check out some of my other work 👍😁
Right now I am restoring an old wrench and after 2 hours of sanding I decided to take a break and now I am looking at your restoration. Maybe I better go for a walk. Lol Anyway, good work as always, precise, patient and with an excellent result. Bravo.
Thanks LTMS for taking a break to watch mine and for the very kind words. I know exactly what you mean. I picked this piece thinking it would be quicker, but I was so wrong. Can't wait to see how your wrench project turns out.
@@Austeration I also thought that mine would be a quick project ... I was wrong, it will take a while, also because I have just moved to another city and I have a lot of things to fix at home.
@@Austeration unfortunately the space to shoot the video in the house is much smaller, but I have a basement and I will organize it soon with a couple of power tools.
Thanks for that Ozwald, you mean the aluminium soft jaws so that I don't leave vice jaw marks. Please check out my latest project if you haven't seen it yet
I did not anticipate this wrench being so small! 😅 I really like the design. I used to use one daily and a design like this would have saved me a lot of mucking with an adjustment wheel 😊
What did you use your wrench for ? Yes would have been much easier than using the wheel 😁 These come in different sizes, I have a big one I might restore some time later.😊
@@Austeration I worked an oilfield job doing pressure testing, etc. Used a lot of heavy duty manual tools. It was a great paying job but I had no life. 🙈
Thanks for watching Dirge, good question. I believe this type of pipe wrench has been around since 1915, could even be earlier. Not sure how old mine are though.
@@steveneeson8648 check this link ua-cam.com/video/QzC6Edo4oA4/v-deo.html Bit hard to explain it so it might be better if you check out some videos on Sandblasting
Great job mate! I love the part you made on the lathe and I personally think hot bluing was the right choice! ✌🏻
Thanks for watching Dr Hut. I only just got the lathe and that was my first piece.
Appreciate your opinion on the thumb screw. I wasn't sure at first but it's grown on me 😁
Hi again full support my friend. Thanks for sharing. Beautiful restoration 👏👏👏👍👍👍 like.
Thanks again A.P.A I appreciate your full support. Looking forward to watching your next project.😁
Caray, no entiendo por qué ya NO existen más estas herramientas. Creo que sería un éxito volver a producirlas nuevas. Bella pieza 💞.
Thanks for watching Jorge. I think you can pick up something similar still but not as simple as these old pieces. Appreciate your comments 👍
Wow would have taken an enormous amount of time sanding down all the pitting. Great job on the lathe too. End result looks amazing as usual 👌 👏👍
Thanks buddy yes it took forever, I was thinking it was going to be a quick job. I picked the lathe up last week, don't really know what I'm doing on it but it turned out ok. Thanks for watching 👍
What an old beauty! Great work mate 😊👌👌👌
Thank you Resto appreciated your support 👍
Should anyone really suggest anything be different. Your an artist - it’s all you, and your amazing!
That's very kind of you taxmagician. Thanks for watching, very much appreciated. If you haven't already please consider Subscribing 👍
Aha! I will continue watching this when I get home. 👍😁
Cheers Nash, I hope you find it interesting.
Had to come see what kinda fun you had going on over here or rather should I say Down under
Came over from Steve Winkleman aka SLW Restorations
I love watching old things come back to life 👍🏻
Thanks for coming over and taking a look Dream Creations, much appreciated. I hope you might find something else interesting in my collection of videos.
Another great restoration, I think every "grandfather" and "dad" had a set of footprints in their toolbox years ago. Mine did lol. Good choice with the hot bluing too by the way.
Thank you. I think my dad still has one in his toolbox. Only ever seen him use it once.
Outstanding job better than new!
Thank you Neil that's very kind of you to say.
I appreciate you watching and leaving a comment. If you haven't already please consider Subscribing and check out some of my other projects 👍
Great job on the restoration and on the lathe! New subscriber here. Jim from Hand tool Restoration sent me. Take care 😃👍🏼
Thanks for checking out my channel David, much appreciated. Jim is such a great bloke.
I hope you enjoy some of my other work 😁👍
Another amazing job from my friend ✌️👏
Thanks for watching Random Restoration 👍
You did it again mate. So cool to see you made the screw. I like shiny but that’s just me…
Thank you so much Longhorn that's very kind of you. Yep I liked the shiny also, I just thought at the time it needed something different. I think I got that bit wrong 😁
I agree mate. I prefer shiny however the work put into that Footprint Wrench was phenomenal. I ‘be done a couple of those myself and they can be deceptive in how much work is involved.
@@shedmanx3640 Your spot on Shed Man. I picked this project because I thought I might be able to get it done reasonably quickly, boy was I wrong. Thanks for watching 👍
That was all kinds of awesome👍Love what you did with the pivot pin. Nice. ⭐⭐⭐⭐⭐
Thanks for watching Nash, you are too kind. Appreciate your tick of approval from the master. 👍😁
I thing the whole thing should be blued.) Nice job!
Thanks for watching xivanovandreyx. I did consider that, it would probably disguise the remaining pitting. Might still do it. Appreciate your comments 👍
You are the MAN! Great Job!
Hey thanks for watching and leaving a comment GBL much appreciated.
Please consider Subscribing if you haven't already and check out some of my other projects 👍
Excellent restoration and you did a great job restoring it!!
Enjoyed your video and I gave it a Thumbs Up
Glad you enjoyed it oneshot, thanks for watching and giving a thumbs up 👍
@@Austeration You're welcome!!
Great job! I like how you did the screw.
Thanks for watching Garyhitch much appreciated. If you haven't already please consider Subscribing and check out some of my other projects 👍
good job!
Thank you for watching and leaving a comment, very much appreciated.
Please consider Subscribing and check out some of my other projects 👍
Nice job! The new thumb screw came out great!
Thanks Magdad 😁 I didn't even know it should have a thumb screw till I watched your restoration of the same thing. I was lucky I managed to pick up an old lathe after starting on it.
@@Austeration Check out Nash Rathbone's channel. He is the Foot Print wrench expert!
@@357magdad Thanks for the tip buddy, I subscribed and checked out his channel.
Very cool.
The blues a nice contrast . Nice machining of the screw , wonderful finish , great to see the teeth come up like that . Shame you didn't polish inside the handle 🤣🤣🤣🤣🤣🤣👍👍
Thanks for watching Jim. I did hit the inside with the mini wire wheel but I forgot to record that bit. Looking at the video now though it doesn't look that clean 🤪 thanks for the pick up 👍👍
@@Austeration I was only joking .......
@@toolrestorationlol you ratbag 🤣
Nicely done. 👍
Thanks buddy much appreciated 👍
عمل رائع جداً أحسنت
Thanks very much for watching I appreciate your support 👍
Great Work! Those things were so pitted...lot of work... you gave that old wrench life again :]...turned out Beautiful!!
Thank you and thanks for taking a look buddy, I think I spent too much time on these but happy with the results
Great work mate better than new...
Thanks for watching Brian 👍
Another amazing job from my friend . Best wishes
Thanks Paul 👍
Great work pro
Thanks for watching Pp4 much appreciated 👍
Great work! Congratulation on your new lathe!!👍👍
Thanks G-Restoration I appreciate you watching. The new lathe is an old lathe. Still needs a bit of work. I haven't been on a lathe in over 30 years so I need to learn.
@@Austeration You have talent ,though it’s the first time to use it! Great! 👍
Also this time great job, congratulations. Cheers from Italy :-)
Hello Italy from Australia 👋
Thank you Up Up I appreciate you checking out some of my other work 👍
@@Austeration Many thanks :-)
Good work 👍
Thank you Crafting Toys, appreciate your support 👍
Shiny for sure! Looks odd the blued screw
Thanks for watching and commenting Brian, much appreciated. I'm undecided now, some like it and some don't. Maybe I should blue the whole thing. If you haven't already please consider Subscribing and check out some of my other work 👍😁
Good Job :)
Thanks buddy 👍
It is a useful tool
Thanks for watching Tips 😁👍
Right now I am restoring an old wrench and after 2 hours of sanding I decided to take a break and now I am looking at your restoration.
Maybe I better go for a walk. Lol
Anyway, good work as always, precise, patient and with an excellent result. Bravo.
Thanks LTMS for taking a break to watch mine and for the very kind words.
I know exactly what you mean. I picked this piece thinking it would be quicker, but I was so wrong. Can't wait to see how your wrench project turns out.
@@Austeration I also thought that mine would be a quick project ... I was wrong, it will take a while, also because I have just moved to another city and I have a lot of things to fix at home.
@@LTMS oh I can imagine you would be flat out then at the moment. I hope the new place has a great spot for you to do your projects.
@@Austeration unfortunately the space to shoot the video in the house is much smaller, but I have a basement and I will organize it soon with a couple of power tools.
@@LTMS all the best sorting it out. I'm looking forward to seeing your finished work.
Good idea, using brass in your vice.
Thanks for that Ozwald, you mean the aluminium soft jaws so that I don't leave vice jaw marks.
Please check out my latest project if you haven't seen it yet
I'm working my way from the top down, and got subscribed. See you soon.
@@TheParkAttendant thank you very much for the Sub 👍
I did not anticipate this wrench being so small! 😅 I really like the design. I used to use one daily and a design like this would have saved me a lot of mucking with an adjustment wheel 😊
What did you use your wrench for ?
Yes would have been much easier than using the wheel 😁
These come in different sizes, I have a big one I might restore some time later.😊
@@Austeration I worked an oilfield job doing pressure testing, etc. Used a lot of heavy duty manual tools. It was a great paying job but I had no life. 🙈
@@xombecca I'm guessing long hours 7 days a week ?
@@Austeration sometimes 10 hour days and then on call when I wasn't working 🙈I don't miss it. I'm a stay at home mom and nail technician now 😅👍
I like the colour contrast of the blued screw... good work again.. What year/decade does this tool date from?
Thanks for watching Dirge, good question. I believe this type of pipe wrench has been around since 1915, could even be earlier. Not sure how old mine are though.
Uma ferramenta extremamente simples mas de utilidade gigantesca.
Parabéns !
👏👏👏🇧🇷
Thanks very much for watching 👍
Apologies for the late reply. Your message only just showed up in my notifications today for some reason 🤔
@@Austeration
No problem !
You make a very nice job!congratulations!
nah, hot blue is Hawt
Hey !!!!!!😊
Lets do this !
very handy pliers to have in your kit 👌
oH I love the MDG stamp . Big Foot
Better than new , love the magnet truck , the rework of the jaw teeth , the resize of the adjustable holes!
the Slider BOLT 😮 nice ❤
2:02 What's this machine ?
Are you asking about the sandblaster ?
Rust removal gun , How is it working ?
@@steveneeson8648 check this link ua-cam.com/video/QzC6Edo4oA4/v-deo.html
Bit hard to explain it so it might be better if you check out some videos on Sandblasting
@@Austeration Thank you very much ❤️
Can i post tjhe Video from you on Twitter?
Sorry what do you want to do ?
@@Austeration May i post some of your Videos on Twitter
@@unizock764 How would you do that ? Are you posting a link so they view it here
@@unizock764 if any one is going to post my videos on Twitter don't you think that should be me.
@@Austeration Iwould go to share and then post it on twitter