Can you hook up lights to a different button for them to go back and forth or does that only work with the headlight button or can you have two switches do wig wag one for headlights and one for the white lights and can I hook up multiple lights to the wig wag setting
Great product and very easy to install. I installed mine in a 2015 Kia Optima and is currently running my grill light and will be hooking my dash and deck light to them soon. Tri-State PSE i get this from you and it was very fast getting to me, thank you.
How did your install go? I just bought this and a split single Feniex visor light and I want to get it setup correctly, so I can utilize all the options of the controller as well as the light bar.
Hey Erick, Can you please show how you did the wiring setup for the lights in the demo to be controlled by the mini are the positive connectors connected to just the green or did you use two connectors from the controller. It would be much appreciated. Thanks
I have a question. Button 1 (top left) can be programmed as a wig wag as you demonstrated and button 2 (top right) changes the pattern. If wig wag is not currently switched on button 1, can button 2 be used to control anything else, or once you enable wig wag button 2 only controls the pattern. Basically if you push button 2 on its own can it do something else when you're not using wig wag? Thank you
Question concerning the flash pattern option (top two buttons): When turned off (either by top left or center bottom buttons), does it revert back to the first flash pattern when started up the next time ... or will it stay on the most recent flash pattern when restarted?
with a dual color strobe white/blue is it possible to have steady burn on both colors as well as have them strobe by just hooking them up to multiple buttons or will I have to change the flash patterns to go back and forth
Will this work with there app? I've been looking for a siren for my pursuit car for awhile and have yet to find the one I like I've got a old school one that seems to work good but it's starting to go out any tips are anything I've been looking st this style well the bigger version are the whelen hhs style one
Can you put the pattern change wire from the 2 fusion surface mounts to one of the buttons on the controller to change the pattern on both or just do it this way
Does this unit have a parasitic draw when off? I am debating putting this in rv to run my outdoor lights. I want to turn off items that already have parasitic draws like usb plugs with leds in them voltmeters and usb plugs all draw from my off grid trailer. I want a control box to kill all of those and If I want them I will turn them on.
Could anyone help me perhaps with some more detailed directions on how to use the momentary feature? I hooked the power and ground to the controller, power to the lights and ground to the lights ( 2 T3's), ran a wire from my switch which I programmed to be momentary, and attached that wire to the two blue wires on the lights, however I am unable to change patterns. Any advice is appreciated
+Letsride600 The outputs on the 4200 mini are all positive, the T3 pattern changer requires negative. You will need to utilize a relay from your momentary button to make your setup work properly.
So I have a question about the Fenix 4200 Mini Controller. I have a 20 inch single row off road led light bar manufactured by Aurora LED and I'm wondering if the controller will be able to handle carrying current to the light bar as well as my other led strobes without blowing the 20 amp fuse that comes with the controller? The light bar comes with a 10 amp in-line fuse. Also as far as powering my lights I'm assuming that the positive wires to the lights get their power from the controller but do I have to ground out the negative wires separately to the vehicle chassis or is there a grounding screw somewhere on the controller to hook the negative wires to?
Brandon Peterson - Each button on the 4200 Mini is rated for only 5 amps of output. I'm not sure where you heard 20 amps, but it's only 5 per switch. The unit is internally fused and also has built in relays. If the current draw exceeds 5 amps it will trip the system and reset itself.
Brandon Peterson - Each button on the 4200 Mini is rated for only 5 amps of output. I'm not sure where you heard 20 amps, but it's only 5 per switch. The unit is internally fused and also has built in relays. If the current draw exceeds 5 amps it will trip the system and reset itself.
Brandon Peterson - Each button on the 4200 Mini is rated for only 5 amps of output. I'm not sure where you heard 20 amps, but it's only 5 per switch. The unit is internally fused and also has built in relays. If the current draw exceeds 5 amps it will trip the system and reset itself.
I got an question hopefully you can help. I was trying to install the feniex 4200 mini and apply the wig wag compatible and when turned on its is very dim. Can you advise me on what I may done wrong
Will the controller provide enough power for lets say 4 4" work lights as well as some T3's? It seems like just the little 14-16ga wire wouldnt be enough..
Alright thank you. Do you know where I could find some more detailed wiring instructions for this? I am mostly curious as to if I wire in some t'3s to the top left switch, and use the wig wag feature to change patterns, and wire something else into the top right switch, after I change my pattern and re set the controller will I be able to control what was wired to the top right switch?
In order to use the wig-wag headlight flasher function, it requires the use of the top left & top right buttons. You would need to wire the T3's to a different button. - www.feniex.com/uploads/literature/80929Mini%204200%20IM%20011116.pdf
Can you show how to do the wiring?
Can you hook up lights to a different button for them to go back and forth or does that only work with the headlight button or can you have two switches do wig wag one for headlights and one for the white lights and can I hook up multiple lights to the wig wag setting
Great product and very easy to install. I installed mine in a 2015 Kia Optima and is currently running my grill light and will be hooking my dash and deck light to them soon. Tri-State PSE i get this from you and it was very fast getting to me, thank you.
+Medox - Thank you for your business! We're glad you like it :)
How did your install go? I just bought this and a split single Feniex visor light and I want to get it setup correctly, so I can utilize all the options of the controller as well as the light bar.
Hey Erick,
Can you please show how you did the wiring setup for the lights in the demo to be controlled by the mini are the positive connectors connected to just the green or did you use two connectors from the controller. It would be much appreciated.
Thanks
I have a question. Button 1 (top left) can be programmed as a wig wag as you demonstrated and button 2 (top right) changes the pattern. If wig wag is not currently switched on button 1, can button 2 be used to control anything else, or once you enable wig wag button 2 only controls the pattern. Basically if you push button 2 on its own can it do something else when you're not using wig wag? Thank you
Question concerning the flash pattern option (top two buttons):
When turned off (either by top left or center bottom buttons), does it revert back to the first flash pattern when started up the next time ... or will it stay on the most recent flash pattern when restarted?
Can you order the mini controller a different color other than green?
Good write up and demo. thanks
Is there any special wiring needed for the headlight flasher to work besides the positive and negative hooked up to vehicle?
Can you use wig wags with your vehicle stock headlights and taillights
With relays, yes.
I have this.. using it for a sign is there a possbility to do wig waging with more than just two outputs? I need 3.
No master switch (one button that activates all the lights at once)?
with a dual color strobe white/blue is it possible to have steady burn on both colors as well as have them strobe by just hooking them up to multiple buttons or will I have to change the flash patterns to go back and forth
Will this work with there app? I've been looking for a siren for my pursuit car for awhile and have yet to find the one I like I've got a old school one that seems to work good but it's starting to go out any tips are anything I've been looking st this style well the bigger version are the whelen hhs style one
Hey does this device hook up to actuator for an electric sign?
great videos, looking forward to the next one!
Thanks!
Can you put the pattern change wire from the 2 fusion surface mounts to one of the buttons on the controller to change the pattern on both or just do it this way
Does this unit have a parasitic draw when off? I am debating putting this in rv to run my outdoor lights. I want to turn off items that already have parasitic draws like usb plugs with leds in them voltmeters and usb plugs all draw from my off grid trailer. I want a control box to kill all of those and If I want them I will turn them on.
Does the wig wags work on any vehicle ?
Dee UnrulyMax - It’s Not a headlight flasher. It’s simply a flasher for a set of, say, grille lights.
Could anyone help me perhaps with some more detailed directions on how to use the momentary feature? I hooked the power and ground to the controller, power to the lights and ground to the lights ( 2 T3's), ran a wire from my switch which I programmed to be momentary, and attached that wire to the two blue wires on the lights, however I am unable to change patterns. Any advice is appreciated
+Letsride600
The outputs on the 4200 mini are all positive, the T3 pattern changer requires negative. You will need to utilize a relay from your momentary button to make your setup work properly.
So I have a question about the Fenix 4200 Mini Controller. I have a 20 inch single row off road led light bar manufactured by Aurora LED and I'm wondering if the controller will be able to handle carrying current to the light bar as well as my other led strobes without blowing the 20 amp fuse that comes with the controller? The light bar comes with a 10 amp in-line fuse. Also as far as powering my lights I'm assuming that the positive wires to the lights get their power from the controller but do I have to ground out the negative wires separately to the vehicle chassis or is there a grounding screw somewhere on the controller to hook the negative wires to?
Brandon Peterson - Each button on the 4200 Mini is rated for only 5 amps of output. I'm not sure where you heard 20 amps, but it's only 5 per switch. The unit is internally fused and also has built in relays. If the current draw exceeds 5 amps it will trip the system and reset itself.
Brandon Peterson - Each button on the 4200 Mini is rated for only 5 amps of output. I'm not sure where you heard 20 amps, but it's only 5 per switch. The unit is internally fused and also has built in relays. If the current draw exceeds 5 amps it will trip the system and reset itself.
Brandon Peterson - Each button on the 4200 Mini is rated for only 5 amps of output. I'm not sure where you heard 20 amps, but it's only 5 per switch. The unit is internally fused and also has built in relays. If the current draw exceeds 5 amps it will trip the system and reset itself.
Very helpful!
Is there a ta function?
With feniex ta’s or hundred series, they have different trigger wires for left, right, and both for center out
I got an question hopefully you can help. I was trying to install the feniex 4200 mini and apply the wig wag compatible and when turned on its is very dim. Can you advise me on what I may done wrong
My lights on my TA were very dim because they didn't have a good ground. Moved the ground to a better location and it lit up normal.
Can a button be programmed to scroll through menus, or they can only be a on/off?
They are on/off buttons, with the exception of the headlight flasher & momentary options.
can you use any kind of lights or do they have to be a feniex brand?
Tyler Jackson - Any LED light will work.
always a great videos
+Corando Garza - Thank You!
+Tri-State Public Safety is there any way to do a step by step video on how to wire Feniex T6 or T3 with alternating flash patterns?
Wondering how long the wiring harness is out of the box?
The wires are about 10" long or so, enough to get you started...
Is this unit compatible with any strobe light or does it require led lights
Wade Mosier - I would stick to Led lights as each button is rated at 5 amps.
Are you selling it or sold it already
www.TriStatePSE.com
Will the controller provide enough power for lets say 4 4" work lights as well as some T3's? It seems like just the little 14-16ga wire wouldnt be enough..
Each button is fused at 5 amps, so you will need to know the amp draw of your lights and assign them to the appropriate amount of buttons.
Alright thank you. Do you know where I could find some more detailed wiring instructions for this? I am mostly curious as to if I wire in some t'3s to the top left switch, and use the wig wag feature to change patterns, and wire something else into the top right switch, after I change my pattern and re set the controller will I be able to control what was wired to the top right switch?
In order to use the wig-wag headlight flasher function, it requires the use of the top left & top right buttons. You would need to wire the T3's to a different button. -
www.feniex.com/uploads/literature/80929Mini%204200%20IM%20011116.pdf
How big is the ball mount? Compatible with Ram Mount?
+Jeremy Gassert - Not really sure about being compatible with Ram mounts.
how much does this go for?
+Chad - Check it out here: shop.tristatepse.com/Feniex-4200-Mini-Switch-Panel_p_197.html
👍😉😀
6 button box for 200$ waste of money
Fienex 4200 so cute
Im the 390th likes
When my controller is turned off there's still power coming out of the green and brown wires....doses anyone know why?