Hay Jay Drone I just got a Jumper T12 and found out on the page button if you hold that down it will go back a page. Then you won't have to go all the way through the pages if you go past the page you want.
Hold the enter key (arrow on the left) and you can go back a page also if you add a switch to channel 6 you can turn off the led's. I have a 2 posistion switch on channels 5 and 6 I can't tell if 5 is doing anything yet.
Thanks, for this info. I finally decided to get a 1 TX for all, so I have this one coming. I like the stock trans on the Bugs 5w good distance ( I can get just past 1000 meters on a good day) + nice info on screen. The Bugs 8 Pro trans I do not like. No distance , no screen. So any help using this T 12 with the Bugs 8 Pro would be appreciated .
I’m not sure u can use this on the bugs drones, the Jumper T8SG is runing devo vs this one runing open tx, devo is constantly being upgraded as aposed to open tc that is the reason I’m able to update protocols with the t8sgs
May not be 1 TX for all, 1 TX for many? I only have about 5 toy drones so far.but I would like to get more of the kind I can buy cheaper without transmitter.@@JayDrone
Yes you can fly the Bugs 8 with Jumper T12. It is on the protocols list. I fly the Bugs 3H with the Jumper T12. Select custom then the sub menu choose 41 this will bind with Bugs 3, 6 and 8. I choose 42 wich binds with Bugs mini and Bugs 3H. You might have to update protocols. I had too.
I now have a bugs 3 and 8 pro. It would be nice to be able to use a little bit better trans for them. Then I'll work on the syma x5uw and the jjrc h31.
Hey JD the Arduino software can create a .bin file that you can load onto the transmitters SD card and flash the Jumper 4in1 for new protocols. And ya can hold page button to go backwards.
Hi! i was thinking to buy this one for my snapper7 flysky, im a beginner, so basically i just turn the mod OFF and select mult Flysky to bind in to my Snapper 7 ?
When I bind to my husban h111 for some reason The yaw and the roll channels are reversed (left is right and right is left) pitcher and throttle work fine but yaw and roll are reversed. Any reason why this is happening from yo video it looks like mine is set up the exact same way!
Yeah I noticed that Jay didn't actually fly the104. I'm pretty sure his is doing the same thing yours s doing and mine did. We should be able to fix it but I have no idea how. THe developers pooched this one. THe sticks track like for my bayang clones and tney work as expected.
Go to page 5/13 and if you want to leave everything in expert mode just change the Aileron AIL and Rudder RUD to -100. I set up modes on switch b and leave the throttle at 100% personally,YMMV opentx.gitbooks.io/manual-for-opentx-2-2/inputs.html
Yo, I just remembered about this one that you had posted. Do have any other quadcopters you bounded with this TX like ( mjx) . Can you hook it up with the link, please. Thank you, Jay drone 👍🏽🕹🚀
I have the T16 and what drives me crazy is that I have to rebind every time I change the battery, I don't want to have to turn off the transmitter every time I change the battery.
Hi jay Can you help me I tried drone days no response yet I gotta jumper t lite a qx95 hooked it up to a old clean flight version works ok so binded motors move can't arm n my mapping wrong motors move in test in clean flight it's a qx95 with dsm2 if anyone can help I'd be so grateful cheers guys.
@@kennethwebb7922 unfortunately I do not own the Drone so I won’t be any help. I did see the post and Drone days what you wanna do is include an image of the controller and the drone so I would perhaps just delete the post and make a new post post without an image is gonna get skimmed over very quickly.
I'm sure that you too will have spotted this by now but a review of this Tx published later than yours suggests that the 'page back' function is accessed by using a long press on the 'page forward' button. _I'm only reporting what I have seen in an effort to assist It may not be accurate_ .
Hay Jay Drone I just got a Jumper T12 and found out on the page button if you hold that down it will go back a page. Then you won't have to go all the way through the pages if you go past the page you want.
Hold the enter key (arrow on the left) and you can go back a page also if you add a switch to channel 6 you can turn off the led's. I have a 2 posistion switch on channels 5 and 6 I can't tell if 5 is doing anything yet.
Great video, do you know if the TX12 will work with the Hubsan 123D Jet race drone and the Hubsan H501S? Thanks,
How to bind bugs 3 ..and upgraded needed
Nice! thx yo, i wish I had one of these TX to control all my Rc/Quadcopters..
found out with my turnigy 9xr pro ..i have the wrong external moduler ..the one i have is for echine and syma ...so i need to buy a better 4 into one
Thanks, for this info. I finally decided to get a 1 TX for all, so I have this one coming. I like the stock trans on the Bugs 5w good distance ( I can get just past 1000 meters on a good day) + nice info on screen. The Bugs 8 Pro trans I do not like. No distance , no screen. So any help using this T 12 with the Bugs 8 Pro would be appreciated .
I’m not sure u can use this on the bugs drones, the Jumper T8SG is runing devo vs this one runing open tx, devo is constantly being upgraded as aposed to open tc that is the reason I’m able to update protocols with the t8sgs
May not be 1 TX for all, 1 TX for many? I only have about 5 toy drones so far.but I would like to get more of the kind I can buy cheaper without transmitter.@@JayDrone
Yes you can fly the Bugs 8 with Jumper T12. It is on the protocols list. I fly the Bugs 3H with the Jumper T12. Select custom then the sub menu choose 41 this will bind with Bugs 3, 6 and 8. I choose 42 wich binds with Bugs mini and Bugs 3H. You might have to update protocols. I had too.
Thanks, for the info. I ordered my T12, but I am waiting for it to come from China. I will try it as soon as it comes.@@MrLDavids
I now have a bugs 3 and 8 pro. It would be nice to be able to use a little bit better trans for them. Then I'll work on the syma x5uw and the jjrc h31.
How do you set this up to work with Velocidrone?
Hey JD the Arduino software can create a .bin file that you can load onto the transmitters SD card and flash the Jumper 4in1 for new protocols. And ya can hold page button to go backwards.
Wow ....so basically most of the older quads I have laying around , I can bind to this ?
A lot of older models yes
As well as hobby grade stuff u would bind to a taranis
Could anyone tell me which one of the jumpers would support the R9 900 mHz & R9m module long range. ? Great videos many Thanks
I just got mail with my jumper T12 ,I turned it on and doesn't say open TX , it says jumperT16... My question is, do I need to update it? Thank you
Hiram Martinez nope it is updated
@@JayDrone thank you Jay!
Hi! i was thinking to buy this one for my snapper7 flysky, im a beginner, so basically i just turn the mod OFF and select mult Flysky to bind in to my Snapper 7 ?
Basicly as I showed it is super simple
Thanks Bro!
+Jay Drone Actually it is working now, I have my Bugs 3 on this since yesterday. You need only flash firmware on multi module.
When I bind to my husban h111 for some reason The yaw and the roll channels are reversed (left is right and right is left) pitcher and throttle work fine but yaw and roll are reversed. Any reason why this is happening from yo video it looks like mine is set up the exact same way!
Reverse ur channels
Yeah I noticed that Jay didn't actually fly the104. I'm pretty sure his is doing the same thing yours s doing and mine did. We should be able to fix it but I have no idea how. THe developers pooched this one. THe sticks track like for my bayang clones and tney work as expected.
Go to page 5/13 and if you want to leave everything in expert mode just change the Aileron AIL and Rudder RUD to -100.
I set up modes on switch b and leave the throttle at 100% personally,YMMV opentx.gitbooks.io/manual-for-opentx-2-2/inputs.html
Looks like a pretty nice TX but I just cant get past those two big spot lights lighting up the screen....
Hey Jay put that fly on altitude hold and take care of it. Great video buddy. 👍👍👍👍Like aways.
Never have fly in my drone room no food or garbage ever in there odd
Yo, I just remembered about this one that you had posted. Do have any other quadcopters you bounded with this TX like ( mjx) . Can you hook it up with the link, please. Thank you, Jay drone 👍🏽🕹🚀
Mjx won’t work with this it’s not devo
@@JayDrone so the older only works with mjx?
I have the T16 and what drives me crazy is that I have to rebind every time I change the battery, I don't want to have to turn off the transmitter every time I change the battery.
Should not do that with every protocol but some protocols you do have to re-bind after each use kind of annoying but really not too difficult
Hi jay
Can you help me I tried drone days no response yet I gotta jumper t lite a qx95 hooked it up to a old clean flight version works ok so binded motors move can't arm n my mapping wrong motors move in test in clean flight it's a qx95 with dsm2 if anyone can help I'd be so grateful cheers guys.
@@kennethwebb7922 unfortunately I do not own the Drone so I won’t be any help. I did see the post and Drone days what you wanna do is include an image of the controller and the drone so I would perhaps just delete the post and make a new post post without an image is gonna get skimmed over very quickly.
Hey Jay I tried like you did for my snapper7 flysky standard but it can not connect idk why ... I'm very noob can you help me?
What became of the Jumper that became a Brick ?
I fixed it
Jay Drone - 👍
Thanks you
Ok...set this up on the Bugs 3 mini
Can’t only works on devo not open tx
This is good to know....hmmm....gotta add the t8sg back to my shopping cart
+Jay Drone Actually it is working now, the new firmware for multi module is now available. I have mine bugs 3 on this since yesterday.
Good video. I suspect that I won't be buying this Jumper. I am too comfortable to start learning OpenTX
I'm sure that you too will have spotted this by now but a review of this Tx published later than yours suggests that the 'page back' function is accessed by using a long press on the 'page forward' button. _I'm only reporting what I have seen in an effort to assist It may not be accurate_ .
Second today
did u delete ur comment with ur adress im off to post and wanted to get that out to u and i am not seeing the comment u left with the address
put it here in comments and i will do it tomarow
I have it packed just got to ink package
Jay Drone P.O. Box 834 Dover Plains NY 12522
"Bounded" 🤣
Bam
First
How does this bind to Hubsan?