I stumbled on this looking for impressions of the Daija, and I just wanted to say that you have an impressive amount of content and a high level of production for someone with so few views. Hope the algorithm blesses you.
Can someone please tell me where the right thumb stick button is located on the arcade stick as I just bought 1 but certain games need that button to proceed but I cannot find. Thanks
Hello, i love the artwork. I have a daija and i would like to custom it like you did but i don't know how to do the artwork. I downloaded the template on the stick's website but from there i'm lost. Could you tell me what are the right dimensions and what software did you use to do the artwork ? I'd be really helpful.
Hi, I'm really struggling to find where to buy the buttons, do you have a specialised site or is it on bacon default page (and I'm an idiot). Thank you.
Bonjour 🙂 serait-il possible que vous réalisiez une commande pour un nacon daija et de vous payer . Je n’ai pas votre savoir faire. Merci pour votre vidéo et votre réponse ☺️
Very cool Video! I love the artwork you created there! I was / am considering the Daijam, but i am no fan of having the PSX Labels printed on the Plexi tho, especially since i am used to XInput (PC Player here)... and as far as i know, swapping the JLF Lever for something else (Hayabusa or Seimitsu) is where the Daija has its problems, as those won't fit out of the box...
For the Nacon Daija, I would leave the sanwa JLF lever just the way it is and swap out the sanwa buttons and replace them with hayabusa buttons. And as for the Hori RAP 4 Premium Vewlix, I would swap out the hayabusa lever and replace it with a sanwa JLF lever and swap out the kuro buttons and replace them with hayabusa buttons.
Dunno dude. I haven't really noticed any input delay, but then I'm not seriously competitive with my fighting games so wouldn't be able to tell anyway lol.. Might be a PCB issue?
How do you cut the circles perfectly? Is there any technique or just freehand? Also does it matter which way the wires connect back to the new buttons? Cheers
I believe so. The stick appears to give full access to all components, but this is not something I am familiar with doing, so further research would be required to find out.
@@rosscoffeegames Great, I just got my Daija last week, the stick is godlike, However I am not so sure about the induced input lag, as people are complaining online, I didn't found any tbh while playing Tekken 7
@@dane2070 I'll post a link after Black Friday deals have ended buddy. Currently the razer website is directing all traffic to one Panthera offer page.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I stumbled on this looking for impressions of the Daija, and I just wanted to say that you have an impressive amount of content and a high level of production for someone with so few views. Hope the algorithm blesses you.
Thank you!
Just coming across this now myself and I totally agree. Great video, great production.
Daija, phantera evo or madcatz TES+? Great video.
If you can find a TE2+ then buy it instantly. But since they are very rare now I've been very happy with the Daija
About 9:50... You know, that if you will use little pin on those copper elements, this cables will go out without any effort?
Figure that out too late :(
@@rosscoffeegames No one is perfect bro, don't worry :) I wrote this for other people, maybe it will help others :) Thanks for vid, all best :)
Amazing, love the art and colors choice. Poor fingers.
Can someone please tell me where the right thumb stick button is located on the arcade stick as I just bought 1 but certain games need that button to proceed but I cannot find. Thanks
Hello, i love the artwork. I have a daija and i would like to custom it like you did but i don't know how to do the artwork. I downloaded the template on the stick's website but from there i'm lost. Could you tell me what are the right dimensions and what software did you use to do the artwork ? I'd be really helpful.
i know its 5yrs ag9, but art work template seems not avail in nacon website
Hi, I'm really struggling to find where to buy the buttons, do you have a specialised site or is it on bacon default page (and I'm an idiot). Thank you.
Let me know what you thought of the video folks, and if you have any question just fire away! ❤️
What app did you use to make the wolverine artwork?
@@goombaboomba593 Hi buddy. I created the artwork myself using a mix of Adobe Illustrator and Adobe InDesign
Gamer Tagged, Thanks for your answer... very few reply to comments. Appreciate it.
Bonjour 🙂 serait-il possible que vous réalisiez une commande pour un nacon daija et de vous payer . Je n’ai pas votre savoir faire. Merci pour votre vidéo et votre réponse ☺️
Very cool Video! I love the artwork you created there! I was / am considering the Daijam, but i am no fan of having the PSX Labels printed on the Plexi tho, especially since i am used to XInput (PC Player here)... and as far as i know, swapping the JLF Lever for something else (Hayabusa or Seimitsu) is where the Daija has its problems, as those won't fit out of the box...
What kind of paper should i use for printing the art? anything you recommend like the paper you used for your art?
Hey Fluff. I use Premium Quality photo paper. It gives a nice glossy effect and is slightly thicker than standard paper.
I have a question about what paper and printer you used? Cheers!
Hey buddy, I used Epson Photo Quality Inkjet Paper. It has a gloss finish to it and is a bit thicker than normal paper 👌
@@rosscoffeegames Hi what size is the paper? and do you have the link for the artwork template? cheers
Love the artwork! Are the buttons standard 30mm?
Yes, standard Sanwa buttons ☺️
@@rosscoffeegames sweet, thanks! Ordered the stick after watching your review and this vid, excited for it to arrive :D
@@Arboncara nice one! Hope you enjoy it. Be sure to update the firmware as it helped reduce input lag by quite a lot.
Great video. I dont know if to buy this arcade stick or Hori Pro N. I think this feature is excellent.
If you want a great stick you can fully mod, buy the Nacon Daija.
Great video. Were you still planning to make that video on using the Daija?
Welcome. How did you manage to apply the graphics to the panel sketch? And how did you print this size?
Hi buddy. I created the Wolverine artwork using illustration and design software. Then I printed it out on an A3 piece of gloss paper.
@GamerTagged thanks for the information. But The A3 paper is bigger than the art work...how did you know the exact size that fits the daija?
For the Nacon Daija, I would leave the sanwa JLF lever just the way it is and swap out the sanwa buttons and replace them with hayabusa buttons. And as for the Hori RAP 4 Premium Vewlix, I would swap out the hayabusa lever and replace it with a sanwa JLF lever and swap out the kuro buttons and replace them with hayabusa buttons.
Hi. Nice video. Thanks! Which Buttons are these exactly? Are they the SANWA OBSF 24 or 30mm Buttons?
These are the 30mm Sanwas 😊
Recently dajia had a firmware update. Can we had a video to mod the PCB etc?
What is this input delay I'm hearing about the Daija Nacon?
Dunno dude. I haven't really noticed any input delay, but then I'm not seriously competitive with my fighting games so wouldn't be able to tell anyway lol.. Might be a PCB issue?
ua-cam.com/video/tQkuknYX0bc/v-deo.html
its one of the slowest pcbs out there. can't even win against drone which is an entry level stick.
@@cobalt9278 Input lag was fixed in the newest driver (2.04).
How do you cut the circles perfectly? Is there any technique or just freehand? Also does it matter which way the wires connect back to the new buttons? Cheers
Would you make the art available for download?
This is something I have be thinking about a lot as I like to create custom artwork and would love to do more.
Does this control take the macbook ios?
Great video I just bought one myself can't wait to test it out.
I noticed that you did not take off spacers from black buttons and new buttons are below the level of acrylic glass.
I fixed that afterward by putting the spacers back in 🤫
Where can i get high end art work cause i dont like the printing the art from my printer with regular paper i dont like this cheap feel
What size do I have to print the Artwork in?
You need to set your paper size for printing to SRA3. That means 320mm x 450mm dimensions.
Nice work!! What size are the buttons??
Standard 30mm Sanwa buttons ☺️
@@rosscoffeegames thank you!! I didn’t expect a reply so fast 😅😅😅
Hie to pop off top of the stick? Cant do it :/
How big is the paper you printed this on?
SRA3 = 320mm x 450mm :D
do you have the template for the artwork? thank you
support.focusattack.com/hc/en-us/articles/207447753-Control-Panel-Templates
Where can you buy artwork for this stick i wanna know.
I created this artwork myself.
@@rosscoffeegames Well you did a nice job. Do you know any artist who i could ask for a commission?
I'm searching for how to install a Samducksa lever on that Stick?
Any lever swapping should just be standard fitment buddy. Providing the housing mount matches.
Where did you get the artwork? Iv been trying to get some for this stick for a while but i just can’t seem to find any
I created it myself buddy. I'm a designer by trade.
Gamer Tagged do you sell your creations anywhere? This stick just doesn’t have anyone selling any graphics
@@tnsymbiote7320 been meaning too but not got a shop set up yet.
Gamer Tagged thats unfortunate
top modding!! you made the art?
Yes buddy 💪
Can I change PCB????? I want to install BROOK.
I believe so. The stick appears to give full access to all components, but this is not something I am familiar with doing, so further research would be required to find out.
Paper Print out size ?? B5, B7 ?
Hello, I printed this artwork out on am A3 sheets of photo quality paper.
@@rosscoffeegames Great, I just got my Daija last week, the stick is godlike, However I am not so sure about the induced input lag, as people are complaining online, I didn't found any tbh while playing Tekken 7
I haven't noticed any either. That being said, I'm not a pro fighting gamer so I don't have analysis software or would notice during gameplay.
As for the size of the paper, would you need to use a4 or a3 paper? or even something else?
A3 minimum.
@@rosscoffeegames Gotcha! And if you don’t mind me asking, what kind of paper did you use for the fight stick?
hey i search a lot of time the template to make my artwork but i find nothing can someone help me pls ( sry for my english i'm french ;n; )
You should find it in "mynancongaming" support site
how do i find arcade stick artwork?
Very easy to replace, and I like that it covers the entirety of the stick.
You can create your own artwork by downloading the templates from the Razer website. We are planning on selling our designs in the future too ;-)
@@rosscoffeegames can put the link here i can't find it in the razer website
@@dane2070 I'll post a link after Black Friday deals have ended buddy. Currently the razer website is directing all traffic to one Panthera offer page.
are you still happy with Daija? people speak about input lag?
I am very much. I even bought a second one. I don't notice any lag when playing. If it's there, then I can't tell.
Input lag was fixed in the newest driver (2.04).
It would look better whit out all the wolverines on the right