Kayak Rack Build

Поділитися
Вставка
  • Опубліковано 29 лип 2019
  • Sometimes you have so many kayaks that you need to come up with a solution to get your boats off the ground, away from creepy crawlies and clean up your yard.
    A friend asked for help and I gladly took on the challenge.
    Please don't be fooled, this took time. Time to research, time to draw up a plan, time to get all the materials and of course, time to build. The obstacle in this build was I needed to actually install this at another location. This brought on a whole new set of challenges.
    Being a rookie to building a kayak rack like this, I did not anticipate the top and bottom posts (braces) not being enough. This was a pain in the butt that I sought help from a timber framer down the road. Thankfully they had the answer and I just gave them the height and width of the opening, took them an old piece of wood and boom, I had a diagonal piece that kept everything sturdy.
    Take a look at the step-by-step directions: www.paddleinpink.com/featured-...
  • Спорт

КОМЕНТАРІ • 16

  • @Mark300win
    @Mark300win 2 роки тому

    This channel is underrated! Thanks for sharing this design

  • @Whiteandsonsgarage
    @Whiteandsonsgarage 5 років тому +1

    Great video mate, what a great idea

  • @Fishing256
    @Fishing256 3 роки тому +1

    Nice ! I’m going to build one like this

  • @tokay999
    @tokay999 2 роки тому

    Your design looks sturdy!

    • @PaddleInPink
      @PaddleInPink  2 роки тому +1

      If I did it again, to make it more sturdy, I would increase each brace to be longer to support more of the weight.

  • @loudhouse7662
    @loudhouse7662 2 роки тому

    Did I overlook a supplies list or would you mind sharing the supplies list?

    • @PaddleInPink
      @PaddleInPink  2 роки тому

      It just depends on what you want for yourself as needs vary. Scroll to the bottom of this link for more of a step-by-step guide that talks about some materials. paddleinpink.com/featured-articles/kayak-rack-build/

  • @tokay999
    @tokay999 2 роки тому

    What angle did you use for the arms and supports ?

    • @PaddleInPink
      @PaddleInPink  2 роки тому

      I honestly don't remember, it wasn't a big angle, maybe 10? Sorry that isn't that helpful.

    • @PaddleInPink
      @PaddleInPink  2 роки тому +1

      I just looked back, 10 degrees is what it is :)

    • @tokay999
      @tokay999 Рік тому

      Thank you so much! I want to show you my build! Made one shortly after watching this video

  • @karinandlarryathome8711
    @karinandlarryathome8711 2 роки тому

    Very nice job. I was looking for a solution that would protect my three kayaks from the weather and chewing animals, but also look good in the landscape. A shed. See my completely enclosed build at "Karin and Larry at Home.

  • @bdarmanie
    @bdarmanie 2 роки тому

    Nice build but your video was to fast and lacked a still image of what you made

    • @PaddleInPink
      @PaddleInPink  2 роки тому

      By all means, send me a still photo once you make it!

  • @antonshkabara3090
    @antonshkabara3090 Рік тому

    Woodglut has a very large project base.