I have watched several of your videos and in every one you seem to just skip over the actual led strip installation. 95% of the videos are of you taking interior panels off and not actually showing the LED strip itself install process. In this one for instance you show only the actual start of a strip install at 6:42 in this vid, and then just jump to the finished panel. Just as a viewer tip you might want to actually show at least one of the panels actual strip install process and then trim piece re-fitment. I have seen comments in your A5 build asking how you fit the strip around the center console because the actual strip fitment process is just missing from all your vids. It's like, here let me take off the panel, discuss how you are going to power them and then boom, next shot is of the strips installed and trim piece back in place. How about a little less time on the panel removal steps and a little more actual LED strip install process. Just a viewer suggestion to make your vids have more value. Nice work and outcomes though.
Brilliant mate, I've phoned auto electricians and auto technicians who won't do these installs and it would surely be a money maker for them but they're not interested. Be able to do myself though with videos like yours. Very clear, calm and positive, easy to understand and informative. keep up the good work.
Hi, what app is that? I have recently installed mine but the app it comes with is so basic and barely has any effects. So i was wondering if maybe with an other app I could maybe get the effects
How door led will be shutdown if you are using live 12v without ignition. I already tried on my q7 but the power available on the cable but the power running all the time even with closing the car
Hi does anybody know. Can you tap into any empty fuse slot to power these kits? Or should you just tap into cig lighter wiring etc he never shows the actual wiring part
Yes, absolutely. They can be shortened, just the symphony comes at set lengths. But its more than long enough to all cars so its just a matter of making it work on your car.
Hello bro do you know the name of the app and do you know why my one isn’t turning on i have ordered two sets and both not turning on am i doing something wrong i’m connecting to the fuse box thank you
Followed everything and done everything thank you so much for your video only problem i had was rear door the led strip at the doest want go in so it sticks out front and dash perfect fitting back just disappointed did you have that issue bro ?
I got one of these kits and every time you power it up, it does some start up effect before switching to the effect you had it set to last. Does anyone know a way to disable this so it goes straight to the effect it is set to?
@@OviWanKeno9i It's sort of like the rainbow. It lights up from one end to the other with different colours until it reaches the other end of the strip and then retraces its steps back until the whole strip is off then it goes straight into whatever routine you had selected. It's pretty quick tbf. Also I found out it can't be disabled, at east on the kit I got but they all seem to be the same, just rebranded.
@@tubbycustard8866 Yeah, it just looks a bit odd aswell. Its not a smooth transition from the startup to what you set it to. It does look amazing though, gets everyone's attention.
Im wondering if you got a different version, MRGCC said the startup effect can be changed and it should remember your last used color. I saw someone else also say it should work on your last used color@@_RIL_
Im still trying to figure out after watching all you videos how do you connect the wires into the door cards but how do you make all them connect toghter as you don't show one box having connecting from each door card
@@mrgcc hey bro you only do this for UA-cam or you do it for private costumers? If you do where are you located and how much would you charge to get this lights done on a 2017 430 GRAN COUPE
i bought a kit like this for my c class w205, i am unsure what i actually connect the led strip lights too when i take of the door panel? what other items do i need such as extenders etc
You’ll need some t-tap connectors. You need to find the main power wires that are live. Normally red and black in most cases. It doesn’t matter if they don’t turn off with the ignition as the main unit will tell the door units when to turn off. Just connect the positive and negative to the sub control units for the doors and mount it in a suitable position
I have watched several of your videos and in every one you seem to just skip over the actual led strip installation. 95% of the videos are of you taking interior panels off and not actually showing the LED strip itself install process. In this one for instance you show only the actual start of a strip install at 6:42 in this vid, and then just jump to the finished panel. Just as a viewer tip you might want to actually show at least one of the panels actual strip install process and then trim piece re-fitment. I have seen comments in your A5 build asking how you fit the strip around the center console because the actual strip fitment process is just missing from all your vids. It's like, here let me take off the panel, discuss how you are going to power them and then boom, next shot is of the strips installed and trim piece back in place. How about a little less time on the panel removal steps and a little more actual LED strip install process. Just a viewer suggestion to make your vids have more value. Nice work and outcomes though.
Brilliant mate, I've phoned auto electricians and auto technicians who won't do these installs and it would surely be a money maker for them but they're not interested. Be able to do myself though with videos like yours. Very clear, calm and positive, easy to understand and informative. keep up the good work.
It's custom work, so it's hard to warranty it.
On these symphony or multi color lights. Is the start up always a rainbow effect or can that be changed?
Always rainbow
Hi, what app is that? I have recently installed mine but the app it comes with is so basic and barely has any effects. So i was wondering if maybe with an other app I could maybe get the effects
How door led will be shutdown if you are using live 12v without ignition. I already tried on my q7 but the power available on the cable but the power running all the time even with closing the car
Hello, you didn't leave a link for the footwell lights, from where can i get those ?
Hi does anybody know. Can you tap into any empty fuse slot to power these kits? Or should you just tap into cig lighter wiring etc he never shows the actual wiring part
Just tap into existing wiring as explained as it's already fused back at the main fuse board.
Hi, really nice work man. Well done. Can these symphony ones be cut to shorter size if needed as the fiber optic ones can?
Yes, absolutely. They can be shortened, just the symphony comes at set lengths. But its more than long enough to all cars so its just a matter of making it work on your car.
@@mrgcc Many thanks for your reply
double sided tape ? theres no way it resist hot interior
Does it work on an a7 c7?
Is it the same on a7?
its so great video!!! is that kit fit to LH USA car 2015 Audi A6 C7 ? and if so can you please send me the link to buy it
Hello, what application do you have installed? because none of them detects Bluetooth, do I need to set something? Regards
Seen these on eBay is it ok to buy them for 2012 Audi a7
The door lights should be cob strip lights so it can illuminate more the colors, the strip that you used are ok for the dashboard only
Care to elaborate on the different strips you referred to?
Do you have a link
Cob are shit
any more info,,links to cob strip lights
man i really need a video like this for the audi a7
same
Hello bro do you know the name of the app and do you know why my one isn’t turning on i have ordered two sets and both not turning on am i doing something wrong i’m connecting to the fuse box thank you
Can you use the rgb leds with the symphony kit
I plugged in to them wires on the door don't work for mine why is that
Where you from bro… i want this done
Do dont had any canbus problems?
Followed everything and done everything thank you so much for your video only problem i had was rear door the led strip at the doest want go in so it sticks out front and dash perfect fitting back just disappointed did you have that issue bro ?
What app is being used to control the lights?
Hey Mr. GCC great job it looks awesome!! I saw you did the same thing on the f10 BMW can I ask where you tap into power on that car?
what is the app called to control these?
Do I need to disconnect battery of the car ?
I got one of these kits and every time you power it up, it does some start up effect before switching to the effect you had it set to last. Does anyone know a way to disable this so it goes straight to the effect it is set to?
Out of curiosity, what's the start up effect? It can't be changed? Is it something tacky like a rainbow thing?
@@OviWanKeno9i It's sort of like the rainbow. It lights up from one end to the other with different colours until it reaches the other end of the strip and then retraces its steps back until the whole strip is off then it goes straight into whatever routine you had selected. It's pretty quick tbf. Also I found out it can't be disabled, at east on the kit I got but they all seem to be the same, just rebranded.
@@_RIL_dang really? I feel like that's such an easy software thing for them to implement, I would get tired v fast of that start up effect
@@tubbycustard8866 Yeah, it just looks a bit odd aswell. Its not a smooth transition from the startup to what you set it to. It does look amazing though, gets everyone's attention.
Im wondering if you got a different version, MRGCC said the startup effect can be changed and it should remember your last used color. I saw someone else also say it should work on your last used color@@_RIL_
What's the name of app?
How meny kits doe it take for each door and dash
Great video sir
Do they need to come on when lights are on
What are the amps fot the t connectors that you should use? The 20 amps one?
Where you based?
Can the flow of direction be altered for each door so it’s in sync?
Hi mate! Where are you based? I need that on my car as well
Instagram**
Can you cut the light strips? I'm afraid I'll ruin them
Yes you can. I'm just after had my car done
Hi how much would it roughly cost to get this installed?
On Instagram
Awesome work, do I need to add fuses?
Can you do install in US
Do you offer install at all?
Yep I do indeed mate
@@mrgcc nice, how to best contact you?
what price install light
How much do you charge to get them and install them
How do you find out what is the live and earth cables?
Use voltemeter
Use t tapers to connect the wires !
😮
Does that mean you liked it haha
Im still trying to figure out after watching all you videos how do you connect the wires into the door cards but how do you make all them connect toghter as you don't show one box having connecting from each door card
@@mrgcc hey bro you only do this for UA-cam or you do it for private costumers? If you do where are you located and how much would you charge to get this lights done on a 2017 430 GRAN COUPE
@@SameerKhan-pz7df they are connected with Bluetooth bro
i bought a kit like this for my c class w205, i am unsure what i actually connect the led strip lights too when i take of the door panel? what other items do i need such as extenders etc
You’ll need some t-tap connectors. You need to find the main power wires that are live. Normally red and black in most cases. It doesn’t matter if they don’t turn off with the ignition as the main unit will tell the door units when to turn off. Just connect the positive and negative to the sub control units for the doors and mount it in a suitable position
@aaronkumar6246 Mate ,before wiring anything, do I need to disconnect the car battery?? And if not ,shall I wire earth first and then live one ,??