@@musayasinbicer You also forgot to mention the extra modifications you made to the bucket teeth and other parts. The ones you used in the assembly are different from the parts you showed us how to make.
what is correct way to add couple of degree tilting angle of those Side panels. I am trying to make bucket with 5 degree tilted side panels but have problems to model it.
Now i managed to make 3d model of it. I was trying to model slope/trenching bucket. Which has little bit V-shape for 2 different dimensions. width and depth decrease towards the bottom of bucket. The magical tool was "move part.." now i can change those tiltin degrees afterwards and make different versions of buckets.
Can you share the link for design?
Sorry, I can't share the drawing files.
very good video but can i ask if you have a 3d model already like you have how you get the drawings and dimensions?
Thanks. I adjust the dimensions myself. I design without taking measurements from any where.
@@musayasinbicer that is way harder
If you want to design something new, you should do exercises like this to make sure the parts fit together in assembly.
@@musayasinbicer i got it thanks alot for your help
You're welcome
Hi，Very nice job, Can I ask if you have the standard of this bucket, especially about the "big ass" part? ,how to design the curve, Thanks
First of all, thank you. This bucket model is completely my own design. I did not make it according to any standard size.
What are the RGB values for the bucket teeth and the bucket teeth part? You never stated them.
I used the bright red and black colors found in the Solidworks colors section.
@@musayasinbicer You also forgot to mention the extra modifications you made to the bucket teeth and other parts. The ones you used in the assembly are different from the parts you showed us how to make.
Yes. There may be differences as I updated the designs I showed in the video later.
Perfect bro 👍😀
Thanks my friend.😃
It's amazing🤩 I needed exactly such an example🥳🥳🥳🥳
There will come a lot of new content like this.😃
what is correct way to add couple of degree tilting angle of those Side panels. I am trying to make bucket with 5 degree tilted side panels but have problems to model it.
I didn't fully understand what you were saying. If you send me the image of your drawing or the drawing file by e-mail, I can help you better.
Now i managed to make 3d model of it. I was trying to model slope/trenching bucket. Which has little bit V-shape for 2 different dimensions. width and depth decrease towards the bottom of bucket. The magical tool was "move part.." now i can change those tiltin degrees afterwards and make different versions of buckets.
As far as I understand, you have solved the problem. I wish you good luck in your work.
Hai , dis dimension is real standard ?
Hi. The dimensions I use are close to reality, but not standard sizes.
coıld you please share with us the ral code ( rgb )
Of course sir. RGB code for yellow color: r 255, g 205, b 17.
@@musayasinbicer teşekkür ediyorum
Rica ederim