My only suggestion is some markings on top where the butt pivots so you can remember where your settings are and so you know you have it dead straight without relying on your eye.
Good shout mate, a scale would be a nice idea. A bit like the butt hooks have for height and the scope rails on the 10m rigs. I'll be sure to forward the idea. I'll say it was mine 😆😆😆 😉
The chassis layout definitely opens up the chance to offer it tailored to more disciplines and users requirements, maybe one day we can fully configure a rifle online..now that would be amazing 🤯
Is the shoulder pad working on a ball joint system? It would seem to me that with the level of adjustment available that it is possible to get the shoulder pad not sitting square on to the shoulder
Flagship stuff seldom makes a profit, it's usually funded by the bread and butter models😉 fun to see it all coming together though and more choice for us 😀
S400 are crap these days still got one here great 10 years ago now days to many great riffles out there I won at Lincoln two weeks ago with a modded gammo coyote
Yeah I've got both the red xti and my 9015 feeling the same. Both can go much lighter than is safe for outdoor target rigs 😬 The trigger sears are massive in the xti compared the 9015 which makes them pretty robust😉.
I can appreciate the engineering behind it, but there is way too much adjustability in it for me. I wouldn't know where to start and can't see my level of shooting benefiting from it. Definitely one for the serious accurate shooters in my opinion.
I definitely think a set up guide and some baseline settings will be useful down the line mate. I reckon the most important thing though is it'll now work for all the disciplines that don't need an adjustable hamster. Shot it this morning prone at 50m and gelling well with it so far. Probably going to go for some higher scope rings though like the red one runs. It turns out I'm not as flexible as I was 😆
It feels great so far mate. I've got to make a few light tweeks to the trigger and grip position but happy so far with the limited time I've spent behind it.
I am a HUGE fan of Air Arms....I was from when they were Sussex Armoury with their Jackal! ....still want one! I have an FTP 900, TDR..510XS I believe.....Pro Sport and TX200.....BUT that alu stock version is not my cup of tea at all. I have a Steyr Challenge LG110 FT and the grip looks exactly the same....but the front of the chassis is rather bulky and strange in form as is the blocky stock. Doesn't seem to do any more than many other fully adjustable alu stocks in my humble opinion. Sorry Air Arms, not trying to rain on anyones parade. 😞
It's an interesting one really. It's actually pared back a lot compared to the Steyr chassis. The fore end is much more slender, it is primarily designed to use the factory adjustable hamster, I made up the black fore end piece to better suit the shooting on the channel here. Grip wise,yeah you're correct that's because anatomically speaking us humans are much the same so the form factor is similar. The factory AA grips though, feel very very different to a Steyr grip. They're much more supportive but not as restrictive on your wrist position as some are 😉
@@tillysgunstocks Thank you for your comprehensive reply.....I wasn't trying to be negative or derogatory, I am a big AA fan and collector...collect more than shoot..lol! I am actually in the process of designing with a friend who has a great CNC machine shop, an FX Airguns based chassis...for the DRS platform and maybe Impact parts....so I understand how difficult it is to be original and innovative. It's much more difficult and complicated than most imagine, and cost due to the ridiculously low production costs in China is a big issue. Good luck with the development Sir!! 🙂
@@simonspain6080 it's not so much about being innovative or original when working within the confines of a factory offered part. Everything has been done before.. twice.. in the aftermarket and the custom shops around the world. What I can tailor build for my customers would be absolutely impossible to do in a factory spec configuration. The mad grips and parts I build specific for that person aren't designed or sized to be used by anyone else so practically useless for anyone other than who it was commissioned for. You only get one chance to make a great first impression when picking a factory rifle up so it has to be paired back enough to offer all the adjustment needed but sized so it can be used by 90% of people. That's why It doesn't have a mad offset thumb up grip for instance. That's never been offered on a factory ft rifle,but the sizing and geometry is so critical it wouldn't work for most people. I can make you a set but a factory offering.. not wise really. Same with things like the micro fine adjusters you'll see on the likes of the anschutz precise chassis. Great for disciplines with the same shooting position but absolute nightmare on disciplines where you might not take 2 shots the same stance over a full season. Same with the weatherproofing aspect. The hardware on this is laid out to deal with the mud,rain snow whatever you can throw at it. All the micro adjusters are a trap for dirt and crud and moisture. I didn't sort the overall styling of this chassis but did have a lot of input in the overall geometry, the woodwork and the grip mounting arrangements. I've done a load of development work for similar chassis stocks you'll see on the DRS. They're easy in comparison.. if you want to really break the mould the grip and associated mounting options are where you'll find a niche. Do it properly and bin off the ar grip mounting and you'll sell a ton. I can run a full development program for you... Cost you though 😉 Cheers mate 😎
@@tillysgunstocks haha!! You clearly know your stuff and certainly far more than I do....excellent info. Thanks! ...and for the offer too! LOL Kind regards from Spain! 🙂
@@simonspain6080 I dont often get to talk about a lot of my work (too many ndas) you can probably tell 😆 There's a lot lacking in the aftermarket chassis world right now,everyone's just copying the MDT silhouette and bunging Arca rails on it all. You got to remember that air based disciplines are much more dynamic that you'll see in a lot the firearms world so the gun fit side of things needs to be quite different and then there's the fundamental difference between the air and live round stuff that nobody talks about.. put me and my wife on a nice warm Spanish fishing beach and I'll tell you all about it 😉
Absolutely not mate, I love the 9015 as I've had it for so long now it fits me perfectly. I was kinda surprised to set a new pb with the red xti tbh. I thought that I was doing ok until that point. The 9015 is a mega test rig too on the channel.
@@grahambristol2988 no worries, there's a size guide for them..the suggested sizes ,for me atleast were odd. I went with the recommendation and at first it was a little tight but after the first use was absolutely perfect. So definitely follow the size guide 😉
Yup, a little unbelievable the film clip I saw, zero recoil at the rifle for a start, even with rigorous ballistics calculations beforehand, you can only base air pressure/moisture content/temperature, and any windage on a forecast. World Class Benchrest Shooters need 7 minutes of sighting and zero before the first 7 minutes timed card, and even the timed card has a sighter plus five scoring rounds, and conditions may mean that a tight group is all that is possible, rather than hitting the centre of the target. Based on the film clip I wouldn't pay to see the film.
I’ll stick with the good old fashioned wooden one , if you can shoot and competent why go Ali my old fashioned wooden one does exactly the same but a shed loads cheaper?? lol 😂 , don’t believe the comments about ultimate adjustment on the Ali version, the good old fashioned one as the same, 😊
To be fair I've seen some poorly adjusted and the original red one did need a little fine tuning and a de grease,the new action is way more subtle in its shot cycle than the early action was.
My only suggestion is some markings on top where the butt pivots so you can remember where your settings are and so you know you have it dead straight without relying on your eye.
Good shout mate, a scale would be a nice idea. A bit like the butt hooks have for height and the scope rails on the 10m rigs.
I'll be sure to forward the idea. I'll say it was mine 😆😆😆
😉
@tillysgunstocks do I get one to test once they've added it 😜
Like a Feinwerkbau X 800 then ?
Pointless why ? Once set up no one else will shoot it
I just need to win the lottery......twice!😂👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎😎😎
Probably 3 Times mate... Hopefully more details coming soon 🤔
Wow, a rifle for all shapes, sizes and requirements 👍
It's definitely a pretty Impressive bit of kit mate. Only limited time with it so far,but I think it'll work out well long term 🤔
Great review - Thanks.👍I agree about the ball trigger, be nice if AA offered an option on the type of trigger for the first owner.
The chassis layout definitely opens up the chance to offer it tailored to more disciplines and users requirements, maybe one day we can fully configure a rifle online..now that would be amazing 🤯
Is the shoulder pad working on a ball joint system? It would seem to me that with the level of adjustment available that it is possible to get the shoulder pad not sitting square on to the shoulder
Very nice 👌
Love Air Arms😊
Shoots as well as my S400 and HW98 😉
I dunno how they can sell enough of those to make a profit especially with all the R&D needed?
Flagship stuff seldom makes a profit, it's usually funded by the bread and butter models😉 fun to see it all coming together though and more choice for us 😀
S400 are crap these days still got one here great 10 years ago now days to many great riffles out there I won at Lincoln two weeks ago with a modded gammo coyote
Verry nice !
I had a go with a 9015 at the range recently and the trigger was sublime. Is the Ali XTi in the same ball park?
Yeah I've got both the red xti and my 9015 feeling the same. Both can go much lighter than is safe for outdoor target rigs 😬
The trigger sears are massive in the xti compared the 9015 which makes them pretty robust😉.
@ thanks for the rapid response. The new XTi is most certainly on my wish list for benchrest.
I can appreciate the engineering behind it, but there is way too much adjustability in it for me. I wouldn't know where to start and can't see my level of shooting benefiting from it. Definitely one for the serious accurate shooters in my opinion.
I definitely think a set up guide and some baseline settings will be useful down the line mate. I reckon the most important thing though is it'll now work for all the disciplines that don't need an adjustable hamster.
Shot it this morning prone at 50m and gelling well with it so far. Probably going to go for some higher scope rings though like the red one runs. It turns out I'm not as flexible as I was 😆
That's just added thousands of pounds to some people's wish list. Great looking piece of kit.
It feels great so far mate. I've got to make a few light tweeks to the trigger and grip position but happy so far with the limited time I've spent behind it.
I am a HUGE fan of Air Arms....I was from when they were Sussex Armoury with their Jackal! ....still want one! I have an FTP 900, TDR..510XS I believe.....Pro Sport and TX200.....BUT that alu stock version is not my cup of tea at all. I have a Steyr Challenge LG110 FT and the grip looks exactly the same....but the front of the chassis is rather bulky and strange in form as is the blocky stock. Doesn't seem to do any more than many other fully adjustable alu stocks in my humble opinion. Sorry Air Arms, not trying to rain on anyones parade. 😞
It's an interesting one really. It's actually pared back a lot compared to the Steyr chassis. The fore end is much more slender, it is primarily designed to use the factory adjustable hamster, I made up the black fore end piece to better suit the shooting on the channel here.
Grip wise,yeah you're correct that's because anatomically speaking us humans are much the same so the form factor is similar. The factory AA grips though, feel very very different to a Steyr grip. They're much more supportive but not as restrictive on your wrist position as some are 😉
@@tillysgunstocks Thank you for your comprehensive reply.....I wasn't trying to be negative or derogatory, I am a big AA fan and collector...collect more than shoot..lol! I am actually in the process of designing with a friend who has a great CNC machine shop, an FX Airguns based chassis...for the DRS platform and maybe Impact parts....so I understand how difficult it is to be original and innovative. It's much more difficult and complicated than most imagine, and cost due to the ridiculously low production costs in China is a big issue. Good luck with the development Sir!! 🙂
@@simonspain6080 it's not so much about being innovative or original when working within the confines of a factory offered part.
Everything has been done before.. twice.. in the aftermarket and the custom shops around the world.
What I can tailor build for my customers would be absolutely impossible to do in a factory spec configuration.
The mad grips and parts I build specific for that person aren't designed or sized to be used by anyone else so practically useless for anyone other than who it was commissioned for. You only get one chance to make a great first impression when picking a factory rifle up so it has to be paired back enough to offer all the adjustment needed but sized so it can be used by 90% of people. That's why It doesn't have a mad offset thumb up grip for instance. That's never been offered on a factory ft rifle,but the sizing and geometry is so critical it wouldn't work for most people. I can make you a set but a factory offering.. not wise really.
Same with things like the micro fine adjusters you'll see on the likes of the anschutz precise chassis. Great for disciplines with the same shooting position but absolute nightmare on disciplines where you might not take 2 shots the same stance over a full season. Same with the weatherproofing aspect. The hardware on this is laid out to deal with the mud,rain snow whatever you can throw at it. All the micro adjusters are a trap for dirt and crud and moisture.
I didn't sort the overall styling of this chassis but did have a lot of input in the overall geometry, the woodwork and the grip mounting arrangements.
I've done a load of development work for similar chassis stocks you'll see on the DRS. They're easy in comparison.. if you want to really break the mould the grip and associated mounting options are where you'll find a niche.
Do it properly and bin off the ar grip mounting and you'll sell a ton.
I can run a full development program for you... Cost you though 😉
Cheers mate 😎
@@tillysgunstocks haha!! You clearly know your stuff and certainly far more than I do....excellent info. Thanks! ...and for the offer too! LOL Kind regards from Spain! 🙂
@@simonspain6080 I dont often get to talk about a lot of my work (too many ndas) you can probably tell 😆
There's a lot lacking in the aftermarket chassis world right now,everyone's just copying the MDT silhouette and bunging Arca rails on it all. You got to remember that air based disciplines are much more dynamic that you'll see in a lot the firearms world so the gun fit side of things needs to be quite different and then there's the fundamental difference between the air and live round stuff that nobody talks about.. put me and my wife on a nice warm Spanish fishing beach and I'll tell you all about it 😉
If i was going to spend £3000+ on that, i would want the new AA logo on it,
Une mouche avait donnée l'indication du centre
Very tidy!
Afternoon are they making left handed aluminium chassis for the XTI- 50?
I don't know for sure mate,but given there's a dedicated lefty action I would guess there will be lefty grips and chassis options too.😎
Great video bud
Do you think you will be selling the 9015?
Absolutely not mate, I love the 9015 as I've had it for so long now it fits me perfectly. I was kinda surprised to set a new pb with the red xti tbh. I thought that I was doing ok until that point. The 9015 is a mega test rig too on the channel.
Hi Tommy, I've just bought a Steyr Challenge which is an excellent gun. I'm surprised that you've not done a test/review on one.
What glove are you using? TIA
It's an anschutz one😉
Intershoot are the boys for these..
@@tillysgunstocks Thanks
@@grahambristol2988 no worries, there's a size guide for them..the suggested sizes ,for me atleast were odd. I went with the recommendation and at first it was a little tight but after the first use was absolutely perfect. So definitely follow the size guide 😉
It’s an assassin’s rifle, 😂🤣😂, just watched, the day of the Jackal, even he would be jealous, 😂
I should have matte blacked the whole thing 😆
I might go lairy ceracoat yet🤔
Yup, a little unbelievable the film clip I saw, zero recoil at the rifle for a start, even with rigorous ballistics calculations beforehand, you can only base air pressure/moisture content/temperature, and any windage on a forecast. World Class Benchrest Shooters need 7 minutes of sighting and zero before the first 7 minutes timed card, and even the timed card has a sighter plus five scoring rounds, and conditions may mean that a tight group is all that is possible, rather than hitting the centre of the target.
Based on the film clip I wouldn't pay to see the film.
I’ll stick with the good old fashioned wooden one , if you can shoot and competent why go Ali my old fashioned wooden one does exactly the same but a shed loads cheaper?? lol 😂 , don’t believe the comments about ultimate adjustment on the Ali version, the good old fashioned one as the same, 😊
Great stock but the rifle still has a stabiliser that doesn't work.
To be fair I've seen some poorly adjusted and the original red one did need a little fine tuning and a de grease,the new action is way more subtle in its shot cycle than the early action was.
Typical AA..... same gun, different stock
Which is why my AA S400 Classic 12ft/lbs is in an MPR Precision Stock for 25 yards Benchrest.