A triangular prism, base 30 mm side and axis 50 mm long is lying on the HP on one of its rectangular faces with its axis inclined at 35° to the VP. It is cut by a horizontal section plane, at a distance of 12 mm above the ground. Draw its front view and sectional top view.
A cube of 40 edge, is resting on H.P on one of its edges, with a face parallel to V.P. One of the faces containing the resting edge is inclined at 300 to H.P. The solid is cut by a section plane, parallel to H.P and 10 above the axis. Draw the projections of the remaining solids .
triangular prism, base 30 mm side and axis 50 mm long, is lying on the H.P. on one of its rectangular faces with its axis inclined at 30° to the V.P. It is cut by a horizontal section plane, at a distance of 12 mm above the ground. Draw its front view and sectional top view.
Sir apne 30 degree lekar ke projection kyo nahi banaya , aur apne baad pe without measuring 30 degree bola , vo sahi nahi lag raha . Baki apka solution sahi hai
A triangular prism, base 30 mm side and axis 50 mm long, is lying on the H.P. on one of its rectangular faces with its axis inclined 30° to the . It is cut by a horizontal section plane, at a distance of 12 mm above the ground. Draw its front view and sectional top view.
Best and clear explanation. Good work brother... i am sure this benefits lot of students who are struggling with the graphics course.
Thanks bro.
A triangular prism, base 30 mm side and axis 50 mm long is lying on the HP on one of its rectangular faces with its axis inclined at 35° to the VP. It is cut by a horizontal section plane, at a distance of 12 mm above the ground. Draw its front view and sectional top view.
A cube of 40 edge, is resting on H.P on one of its edges, with a face parallel to V.P. One of the
faces containing the resting edge is inclined at 300 to H.P. The solid is cut by a section plane,
parallel to H.P and 10 above the axis. Draw the projections of the remaining solids .
triangular prism, base 30 mm side and axis 50 mm long, is lying on the H.P.
on one of its rectangular faces with its axis inclined at 30° to the V.P. It is cut by a
horizontal section plane, at a distance of 12 mm above the ground. Draw its front
view and sectional top view.
Thank you so much sir, i was finding this question from such a long time
Best explanation bro
Thank you and please subscribe and share
From where to we measure 12mm sir only showing one edge of scale
12mm above xy line
Nice video😊
Thanks 😊
Sir how we draw development of letral surface
Inshallah I will upload video related to this.
Every questions of engineering graphics is their in ur chanel ?????
Variety of models I have tried to cover. Every question of engineering graphics is not possible to solve.
Sir where to locate the axis of the triangular prism in the the triangular face
Find the center of triangle on both trianglular faces of prism and join them with thin chain line.
Vedio is nice,but I didn't understand that how you are taking a line after pointing 30 degrees to the right side
Prism can be shifted in the 2nd top view make sure it should not touch to the xy line.
Sir apne 30 degree lekar ke projection kyo nahi banaya , aur apne baad pe without measuring 30 degree bola , vo sahi nahi lag raha . Baki apka solution sahi hai
30 degree is marked alredy may be thin line is not visible clearly in the video.
Entire drawing measurement lekar hi kiya h
@@RafeeqEngineeringDrawing thank you sir for your reply. But how do I contact you. I have many doubts in ED please help me .
Show lines properly it's not visible
Ok
Why are you telling so fast
To avoid lengthy videos
I have watched this video for 45 minutes to understand that
A triangular prism, base 30 mm side and axis 50 mm
long, is lying on the H.P. on one of its rectangular faces with its axis inclined
30° to the . It is cut by a horizontal section plane, at a distance of 12 mm above
the ground. Draw its front view and sectional top view.