Hi Ian … this series just gets better and better… your close up shots are brilliant showing the engineering in this kit…. The parts looks superb. This series is loaded with advice and is lovely to watch… really great style of presentation.. Thanks… Michael
Those tail blade holders are as big as the main blade holder's from the 230S aren't they🤣? This thing is beautiful. Again a golden one Ian! Nice tric with that wiring on the screwdriver👌👍😁
Excellent build series, getting lots of views as I expected and well deserved. Interesting to anyone who likes Copters even if not planning to do a build IMO. Interesting to see what's involved with a Trex build! 👍👍
About 18 hours Cliff, I can't do much more than about 5 hours because my fingers start cramping and I get a bad headache!! Thanks for watching and commenting Cliff 😀👍
@@IansRCExploits No worries 3 1/2 mm will not do it. I was hoping about 5mm. I'm doing a Frankenstein deal on a belt system tail pitch assembly. tail shaft of 4mm, boom of 22mm, belt of 5mm wide. I think I'll need to look into the align 600 belt and tail pitch system. Thank you. 😁
Hi Ian … this series just gets better and better… your close up shots are brilliant showing the engineering in this kit…. The parts looks superb. This series is loaded with advice and is lovely to watch… really great style of presentation.. Thanks… Michael
No thank you fir your support 😀👍
Great tip for the eyelets on the servos. Cliff is a great builder...so are you Ian. Impressive progress. You are very methodical.
Thank you very much Adam, it has taken the best part of a week to build and set up 😀👍
nice work buddy!!
Thanks dutchlove 😀👍
Ian fantastic build, great tip on taking your time to get everything correct, Jeff in LA USA
Thank you Jeff for your kind words 😀👍
Great job Ian!
Thanks Mark 😀👍
Those tail blade holders are as big as the main blade holder's from the 230S aren't they🤣? This thing is beautiful. Again a golden one Ian! Nice tric with that wiring on the screwdriver👌👍😁
Ha Ha they probably are Adnan!! Yes it's a lovely kit 😀👍
Excellent build series, getting lots of views as I expected and well deserved. Interesting to anyone who likes Copters even if not planning to do a build IMO. Interesting to see what's involved with a Trex build! 👍👍
Aww thank you Mark 😀👍
Thank you again Ian great upload and advice
Thanks Gareth, hope your kit came 😀👍
@@IansRCExploits should be here tomorrow 😊
Well let's hope so, is it your first Align kit?
Thanks for the shout out Ian 👍 Glad you found the idea useful. How many hours do you reckon so far for the build?
About 18 hours Cliff, I can't do much more than about 5 hours because my fingers start cramping and I get a bad headache!! Thanks for watching and commenting Cliff 😀👍
Ian, 2 Questions. How wide is the belt, and what is the outer diameter of the tail boom?
The belt.is about 1/8th of an inch it's thinner than the old 500 but I will measure them both for you later 😀👍
@@IansRCExploits No worries 3 1/2 mm will not do it. I was hoping about 5mm. I'm doing a Frankenstein deal on a belt system tail pitch assembly. tail shaft of 4mm, boom of 22mm, belt of 5mm wide. I think I'll need to look into the align 600 belt and tail pitch system. Thank you. 😁
Yes the 600 is much bigger Jason 😀👍