DT 125 RE/X DERESTRICTING GUIDE [15 TO 25 HP] - PowerValve and Exhaust
Вставка
- Опубліковано 8 кві 2020
- This video is about how to derestrict a dt 125 re/x (2004 onwards). The power gaining is only indicative of the performance you'll get with these mods. This is only an informative video, you can't ride on the streets with these mods.
giannelli power graph (wire and stock exhaust vs wire and giannelli): www.giannelli.com/it/assemble...
how to calculate top RPM and things like that: • From KM/H To RPM! Don'... - Авто та транспорт
![Yamaha Power Valve: Alligned to Hole or to Exhaust Port? [YPVS DT 125 RE/X]](http://i.ytimg.com/vi/obMy0adby8Y/mqdefault.jpg)
I bought a brand new DT125R in 1989. I ran it in as advised but after running it in, was disappointed that it would struggle to go above 60 mph. I had just pxd a TS125X for this and that would do 75 mph. Then I learned about the power valve. I altered it with the info I received and the bike would go off the clock (over 80mph) never knew its actual top speed. Only thing was, was that the lovely smooth exceleration it had standard was lost. It was pretty much dead till you hit the powerband and then it went mad.
I had a tzr with the same engine and know what you mean. My dt125re with the power valve controller is amazing smooth snd powerful. Thats what the tzr was missing
How did you do it? Did you read it on a Forum?
Hi peter great video just bought one myself and love the tips your giving keep up the good work my friend
matthews919 thanks man, it's a great bike!
PeterToRide they definitely are I’m looking forward to your next video mate stay safe
The small bottle on the side is a fual economy bottle alot of people change back to the older model carb boot to do away with it or just block it up if its fual economy its just another restriction but i don't think it makes much ov a deference if you want it to go faster take the air filter guide out & put your filter back in without it but i like everything standard myself has these are worth money & i like to look after them but nice to seeyou working on your bike pete
@@officialmysteriousrider6327 sorry man, i don't see the comment if you reply to someone else
@@petertoridechannel9361 its ok mate sometimes i get my message's late too hope you're ok buddy
Hey, do you know if that muffler fits the original exhaust? I want that muffler but with the original exhaust but I don't know if it's compatible.
Great channel, I have the same bike, learn a lot from you!
hi peter, do you know if this mod i possible on a tdr 125 1991 3sh1, because when I look at the connector with 4 wires with the green one, 4 come in in and 4 come out but the bike seems to stop revving when I get it to 8500-9000 rpm and I thought it was something with an rpm limiter. I know that the tdr and the st are very similar so I thought there probably is an rpm limit. if you could tell me if you know something that would be good. thank you
My dream bike
the bottle thats botled to the frame can be removed by replacing the pipe that goes from the airbox to the carb with one from an earlier DT model, it helps with pick up.
iCHUNKUSMAXIMUS thanks for the advice!
I have just bought an LC2 125 instead of messing around with these things.
LC2 is stock 22HP, Mine has an exhaust without the stuff inside(empty exhaust) it has now around 24-25HP :)
Plus I have a "200"main jet ;)
cool!
Is it a ktm lc2 you’re talking about, if so how is it as I’m considering buying one
What exhaust are you using? Or is it stock and if so how did you remove the stuff inside?
I recommend to get main jet from dtr then see if the micture is right
Vetko's Garage i think dtr has a 240, in my case it's too big, better 220 for me
15hp ca to go 30-40k 25hp derestrict can? Max
Hi Peter, Can you tell me iff the 91 tdr Belgarda (3SH)is using the same frame as the DT ? Airbox and exhaust look the same .
ff it is i can get a DT gianelli exhaust.
Maybe you know iff the tdr is restricted? Does not feel like 23hp to me.
Thanks
I honestly don't know if the frame is the same one. I know the exhaust's attachments are different between the 04-06 dt and the older one.
this is how to derestrict the dt (devided in different years), search for the 91, it could be the same for the tdr: www.slideshare.net/kerryprinceuk/derestricting-the-yamaha-dt125-r-1988-through-to-2007-scrimsmustangs-classic-yamaha-restorations
have a look at this forum: dt125r.co.uk , they are experts on the topic
@@petertoridechannel9361 oke great thanks
can you write to me what is this cable cutting? I do not know how it is possible that after cutting it the valve opens to the max?
MichiEnduro you cut it and connect it to the ground (frame), it just closes a circuit that has been designed by yamaha. they had to do this because of the 15 horsepower law, but the engine has a lot more
@@petertoridechannel9361
does this not affect the engine and its service life badly?
best exhaust on dt is Athena exhaust, gianneli work well to hi rpm
The Athena aint the best its good for low rpm but at high rmp its not That good
Does powervaulve work on yamaha TDR 125cc
Yes the tdr has same engine same has tzr dt125x dt125re Sachs derbi gpr ktml2 all of them have power valve some come locked & some with servo moter for top & bottom end power
hi peter-old DT DRIVER. can you do that change the brake pads behind ? thanks.
yes bro, will do
hi peter that would be great-i want to make the brakes myself-thanks peter.
how often do you have to change piston is it the same as a yz125
every 15.000-20.000 km, it has less manteinance than the yz125
ok i think i will get one of these i was wondering cause if so the honda xr was going to be next bet. but the dt125 it is
e per un DT125R del 1991 sai come si fa a sbloccare?
dai un occhiata qui, è diviso per annate www.slideshare.net/mobile/kerryprinceuk/derestricting-the-yamaha-dt125-r-1988-through-to-2007-scrimsmustangs-classic-yamaha-restorations
@@petertoridechannel9361 grazie mille
You can olso rotate power valve 180°
you need to do that on some of the older models, never heard of the need of doing it on 2004 onwards models!
@@petertoridechannel9361 you might have right. I had 2000 model and I remember doing that
che ne pensi di allargare il l'airbox invece?
Simone Gradenigo più lo allarghi e più devi salire di getti, con il carburatore originale ottieni solo coppia ai bassi ma la potenza max rimane la stessa, con un 32 o 34 mm puoi salire anche di potenza agli alti. io ho tolto solo lo snorkel e il sound migliora notevolmente
@@petertoridechannel9361 togliendo lo snorkel c'è bisogno di ricarburare?
Simone Gradenigo si quasi sicuramente, comunque lo puoi togliere, farti un giretto e capisci subito se la moto gira male ( quando si potrà farsi un giretto..)
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
My dt x 2007 is with the 5 gear faster than the 6gear???
you are losing power somewhere.. what pinion have you got?
@@petertoridechannel9361 16
you have some lack of power, maybe it's just time for a top end rebuild
Minuto 3:42 mi spieghi a cosa servono quei due pezzi in plastica? Ho smontato quello di lato, è vuoto e collegato alla cassa filtro
servono per migliorare l'erogazione. alcuni allargano con il trapano quello vicino al cilindro fino a un diametro di 10-11 mm ma non cambia quasi niente
@@petertoridechannel9361 ah ok grazie, puoi lasciarmi il tuo Instagram?
@petertoride
210 originali
Ciao, perché non metti i sottotitoli in Italiano o parli italiano che secondo me ti riesce pure meglio?😅
ciao! ho anche un canale italiano (non di moto) e ho riscontrato che gli italiani criticano molto di più, invece in inglese
ci si scambia opinioni in tutta tranquillità.
e poi il dt non è molto apprezzato in italia , dove piacciono solo gli estremi: il racing o il 4t
@@petertoridechannel9361 Peccato, avresti qualche consiglio da darmi per dare un po' di briosità in più ad un DT del 2005, ho montato una Arrow completa ma vorrei qualcosa di più, tipo un gruppo termico 170 e magari un carburatore più grosso... Solo che non so dove acquistare, qui in Italia le elaborazioni x questa moto non sono tantissime 🤬
@@petertoridechannel9361 La mia è un Motard
c'è il 170 athena ma molti hanno riscontrato difetti di produzione e la potenza che si ricava non è molta. puoi salire di carburatore, ti consiglio sempre il mikuni tm ss che ha l'angolazione adatta al collettore del dt, e non oltre il 34. la cosa che rende più di tutto il resto è la centralina programmabile zeeltronic, peró devi saperci mettere le mani, se sbagli butti via il motore.
se capisci l'inglese vai su dt125r.co.uk
quello che so l'ho imparato su quel forum
Nope Nope and Nope Full dep system and stage 2 shorty mate..you will find with black widow and Aarow they are very loud and if ya live in built up area and go to work on your bike half the town can hear you my full Aarow system was very expensive £480 for full rig and black widow was a bit cheap but very loud ...Now the full DEP system and shorty is not so loud but sounds the dogs bollox but also gives you full power ...
Older model more easy things
the worst to derestrict is the 1999-2003, older ones are ok
I have DT125R 1999, any tips for it? Just bought right now Athena exhaust, do i need anything else for derestrict?