Hello, great work, I have been following you for a long time, I have a project similar to yours, with many doubts and expectations since the information that is shared is very little, that is why I appreciate your time in making these videos, my concern is in the type motor if you use a Nema 23 or Nema34 the Injection Screw can have a Retaining Ring Check to prevent material recoil or use an extruder screw. Thank you.
Hi, thanks you so much. The injection screw I use servo instead of step motor. A retaining ring is very well in this case, but maybe ver 2 I can use it
Congratulations on starting the project! I'm waiting for your entire project because I intend to build a machine like this. Would you make the project drawings available?
Note: Confusion of micro injection molding machine. On the internet, there’s often confusion between micro injection molding products and micro injection molding machines. However, these two are distinctly different. Micro injection molding machines typically refer to smaller, simpler injection molding machines that offer a cost-effective solution. These machines usually have basic structures, limited automation, and relatively lower production precision. As a result, while they’re suitable for manufacturing simple, small-sized products, they’re not designed for extremely small or highly detailed plastic parts. Such limitations make them unsuitable for producing the tiny, intricate components often associated with micro injection molding products.
Hola gran trabajo desde hace mucho tiempo te sigo tengo un proyecto similar al tuyo yo, con muchas dudas y expectativas ya que la información que se comparte es muy poca, es por eso que agradezco tu tiempo en hacer estos videos mi preocupación está en el tipo de motor si usas un Nema 23 o Nema34 el Tornillo de Inyección puede tener Chequeo de Anillo de Retención para evitar el retroceso del Material o uso un tornillo extrusor. Gracias.
Alguien de verdad se cree que esto vale para algo? Solo le pone 2 columnas, pues si pone 4 y no son perfectamente paralelas no podria ni deslizar las placas, lo cual dice lo poco que confia en su precision de mecanizado de las placas.
Hey sir great project, I wanna build It my self too, please give me the quote and if possible then can you sell me a full diy kit with the guide to make this my self. I am highly interested in This project. Please contact me
Contact me to get project design drawing and controller software: Whatsapp/Telegram:👉 wa.me/84915767171, my email: tamnm7171@gmail.com
Hello, great work, I have been following you for a long time, I have a project similar to yours, with many doubts and expectations since the information that is shared is very little, that is why I appreciate your time in making these videos, my concern is in the type motor if you use a Nema 23 or Nema34 the Injection Screw can have a Retaining Ring Check to prevent material recoil or use an extruder screw. Thank you.
Hi, thanks you so much. The injection screw I use servo instead of step motor. A retaining ring is very well in this case, but maybe ver 2 I can use it
Awesome build! Where did you source the pulleys?
I find this on shopee
I am really impressed with your video, I look forward to your part 2 video.
Thank you, i’ll ready to create part 2 of this machine
Una dónde puedo consegir ese producto para ensamblarlo.
Contact me: +84915767171
love your video. can't wait for part 2
=]] i know who you are
I know who you are too. But still love your work. Keep rolling my man
It's a very nice video, can you share the equipment you use so we can learn?thank you 🙏🏾
Congratulations on starting the project! I'm waiting for your entire project because I intend to build a machine like this. Would you make the project drawings available?
I’m happy because you like this. This project I just build a demo version, may be have v1 v2….:)
Are both sides of the body made of aluminum?
Yes, Aluminum both
Hello , great proyect I´m interesting to know what diameter of Screw are you using
Hi, The diameter of my screw’s D20
@@handmadenguyen Thanks sr , I've seen those screws in aliexpress
Hi, okie @antrackuavsolutions406
Saludos desde Ecuador execelente proyecto, felicitaciones,por favor comparte los planos, gracias, gracias
Grazie!
Great work! What motors do you used? Thank you.
Thank you, I use step and servo
@@handmadenguyen can you tell me specification?
Nema34 and 750w friend
@@handmadenguyen Nema for clos and servo for extrusion?
Where can I buy all the electronic components on boards? Do you provide mounting support?
Yes, please contact me via: nguyenminhtam010793@gmail.com
It turned out great!
Where did you buy the auger? Is this a standard product or custom made? I want this too =)
Custom :)
where I can find pulley & bearing fix to lead screw?
Alibaba
@@handmadenguyen what is the name?
@madubeesy9126 it’s depend on your lead screw diameter. I use 6814zz
Where we can find the extruded screw barel
Can send me any link of page or web site
No page/website friend.
I manufact this by cnc machine
Ok
type in search 1005005676015620
Note: Confusion of micro injection molding machine.
On the internet, there’s often confusion between micro injection molding products and micro injection molding machines. However, these two are distinctly different.
Micro injection molding machines typically refer to smaller, simpler injection molding machines that offer a cost-effective solution. These machines usually have basic structures, limited automation, and relatively lower production precision.
As a result, while they’re suitable for manufacturing simple, small-sized products, they’re not designed for extremely small or highly detailed plastic parts. Such limitations make them unsuitable for producing the tiny, intricate components often associated with micro injection molding products.
Nice work! What's the material of your parts?
Thanks you! I use aluminium and suj2
Oh. Lâu rồi em mới thấy anh lên clip
Anh mới quay lại nè em
@@handmadenguyen hay đó anh
Cảm ơn em nhìu nhe :)
Hi. You're doing a really great project! Can you tell me what type of NTN bearings you are using here 0:50?
Hi, this bearing I use: NTN 6814zz
@@handmadenguyen thanks! Waiting for the part 3.
Thanks you
Do you have the blueprints? technical drawings for these parts?
I have drawing of this machine
i want that kit how much price
Please chat via whatsapp/ +84915767171
Do you have journal or reference to build this? Can you share it plz 🙏
I consulted the machines on the internet and made it my self
nice job bro ,Can you share the firmwarem,What is the brand model of the servo motorm,thx!
Please contact me via whatsapp: +84915767171 or email: nguyenminhtam010793@gmail.com
Hello, can you tell me which pair is 3.55? 2005 or 2505
2505
@@handmadenguyen Thank you!!!
Hello, Can you help me with some industrial parts?
Yes, contact me via tamnm7171@gmail.com /+84915767171 whatsapp/teleg
How big size can make by this machine ?
Mini or desktop size ok
@@handmadenguyen dekstop..
Do you have whatsapp?
Where can i buy a bearing like that 3:50
Hi, which bearing ?
Hello, i want that kit,how can i get one
Please contact via email: nguyenminhtam010793@gmail.com
God bless you
Hola gran trabajo desde hace mucho tiempo te sigo tengo un proyecto similar al tuyo yo, con muchas dudas y expectativas ya que la información que se comparte es muy poca, es por eso que agradezco tu tiempo en hacer estos videos mi preocupación está en el tipo de motor si usas un Nema 23 o Nema34 el Tornillo de Inyección puede tener Chequeo de Anillo de Retención para evitar el retroceso del Material o uso un tornillo extrusor. Gracias.
Hi, can you translate to english?
Need
Timing Pulley GT2 ( 20Teeth
Hi,
It for 3d printer?
Hi, can you be contacted to buy some of the parts you used?
Hi, Which part do you need?
0.04 sec is this diy injection is remadely available can you tell me proper name of this for my browsing search pls?
Pls
Hi. Chat with me via Whatsapp: +84915767171
Mình muốn mua 1 chiếc cho mình xin thông tin liên hệ nhé ❤❤
Check mail dùm mình nhé
Which country are you in and what is the price of this machine?
Contact me via email: tamnm7171@gmail.com or Whatsapp: +84915767171
Sir I want to start this project plz can you share me the dimensions of plates and parts so it will be easier to make good Machine please
How much is that kit
Kit about 1700$
BOM DIA .. OS MOTORES SÃO DE QUANTOS KGF
Hi, this motor’s 750w
If you need help with the comtrol system, I can help you.
Thank you so much
Alguien de verdad se cree que esto vale para algo? Solo le pone 2 columnas, pues si pone 4 y no son perfectamente paralelas no podria ni deslizar las placas, lo cual dice lo poco que confia en su precision de mecanizado de las placas.
How can i contact you i have Some questions
Pls contact me by email: nguyenminhtam010793@gmail.com
Brp bos harga mesinnya
Send desenho machine for me
Please contact by email: tamnm7171@gmail.com or Whatsapp: +84915767171. Thanks
Do you drawing all parts snd me
Yes
Sir i wants drawing please?
Have you recived my e mail
Ok, check your e mail pls
so ruffly how mutch cost this one ??
Hello, tell me the name of the nut of a screw pair with a round section
You mean the nozzdle?
@@handmadenguyen ball of a screw pair
@@handmadenguyen nuts that are usually cut off on both sides, you have it round.
What time in the video are you?
@@handmadenguyen 4:06
Hey sir great project, I wanna build It my self too, please give me the quote and if possible then can you sell me a full diy kit with the guide to make this my self. I am highly interested in This project. Please contact me
Thank you. Please contact me via: tamnm7171@gmail.com or +84915767171 (whatSapp/ telegram..)
@@handmadenguyen Sir I have mailed you.
@rudrarajput1791 What's your email?
Sir i wants drawing please?
Hi, so sorry, i cant share free our design