Everyone like this so people!! can see WD40 is a solvent which would wear down the bearing you’d need a lubricant like motor oil, and olive oil thanks me later
Ok first of all, he failed to remove the shield that would actually expose the bearings. 2Nd of all, WD40 removes the grease inside the bearing that keeps the parts from heating up and touching as well as protection against moisture. DO NOT do what he did to youre bearings. you can remove the side casing to expose the actual bearings and clean them with WD40, then use paint thinner to clean away the WD40. Rinse the paint thinner off the bearings using warm water and immediately dry them. Final step, add new grease to the bearing and attach the protective side shell. Youre bearings will be "like new" again. And I mean, "LIKE" new... just buy new bearings.
Hi Guys, I know so many of you guys are complaining about using WD40 and that time I didn't know it's damage the skateboard. When I made this video I always used WD40 on my skateboard and it helped me so thought of making a tutorial about it. I'M REALLY SORRY IF IT'S DAMAGED YOUR SKATEBOARD ANYWAY 🛹. Please do let me know should I make another video?
Put one small ring(if u have one) on the bolt thing on you truck then put 2 bearing on there then another small ring and then push the wheel on it so that the bearings Will click inside the wheel and then Just screw the ring thing back idk how its called in english
Do you know what I should use? I've been looking for a way to make mine faster bc they dont like to spin but every way I've seen tells me to use this way although everyone in the comments say something else
Please do subscribe It's motivates me to make new video like this and Please share your ideas what's the next video should be on... New video how to make your skateboard faster: ua-cam.com/video/qfDH3egC3Ro/v-deo.html
It might be an idea to take the shield off the bearings, then clean with something like isopropyl alcohol, then leave to dry or use a hairdryer. (The alcohol evaporate really quickly but I hairdyer to be safe), then finally put some bones speed cream in there and give a spin. No need for any WD 40
Bro, I mean you shouldn't make these vids anymore cuz u made the bearings bad, make some gameplay videos ooorr try to learn different skills, like: learning to backflip, doesn't have to be a specific amount of time, just that you did it
please don't use wd40 on bearings for a cleaner. they will rust and you will have to keep reapply. use bones speed cream for lube. if you want a strong cleaner you can use acetone.
You need new bearings. DW-40 isn't a lubricant it's made to clean off lubricants but a lot of people misunderstand the usage of it. this dude probably made this video to trick people. If you buy descent bearings and a skateboard bearing cleaning and lubing kit you should be set for 2 years
Came for a tutorial, ended up watching a Hollywood movie.
oml lol
lmaooo same
Everyone like this so people!! can see WD40 is a solvent which would wear down the bearing you’d need a lubricant like motor oil, and olive oil thanks me later
Bmor3 L3thal20 I know right
So I can just use olive oil right
@@Serendipitous-Cyclops ye
@@bruh.boi__4417 how does that work?
@@subswithoutContentchalle-tn8vs it's oil in cooking it's used as a fat to not stick to the pan but it's oil also the same as motor oil
Took me 20min just to find the wrench 😂
LOL
Get a skate tool trust me
lmfaoo
D3 .R nah
Ok first of all, he failed to remove the shield that would actually expose the bearings. 2Nd of all, WD40 removes the grease inside the bearing that keeps the parts from heating up and touching as well as protection against moisture.
DO NOT do what he did to youre bearings.
you can remove the side casing to expose the actual bearings and clean them with WD40, then use paint thinner to clean away the WD40. Rinse the paint thinner off the bearings using warm water and immediately dry them. Final step, add new grease to the bearing and attach the protective side shell. Youre bearings will be "like new" again. And I mean, "LIKE" new...
just buy new bearings.
You probably just saved me 30 bucks
Could you look at his recent video on how to do it and see if he did it right? If you ever have the time 👍
LOL yea i was waiting for windex or something and he uses wd40 on something that has bearings in it lol
Why would you ever put water on you ur bearings the oil keeps water off so they don’t rust
Also paint thinner dries pretty fast with no residue
Hi Guys, I know so many of you guys are complaining about using WD40 and that time I didn't know it's damage the skateboard. When I made this video I always used WD40 on my skateboard and it helped me so thought of making a tutorial about it. I'M REALLY SORRY IF IT'S DAMAGED YOUR SKATEBOARD ANYWAY 🛹.
Please do let me know should I make another video?
Crap. WD would damage anything, it will just remove dust and dirt. After cleaning, lube it with some oil and you good to go. WD is not lubricant btw.
Nooo I read this comment too late 😢
Amazing Very helpfull to me BTW thank you 😁
Yeah if you have rusty wheels its going make scratching noises and u better get a new one
I think I hate my skateboard now
Lol dont use wd-40 it takes out the greese and it gets sticky
What can you use
@@lizzyrxmirez3943 I think you can use oil like olive oil that works to but dont listen to me do some research first
He said he uses wd-40 to clean not lubricate
@@kingroach5794 wait what if i use my parents lube the dont use it i think but their is some marks on their bed if i use a black light
If you want to feel like your skating on a suitcase go ahead
Jake Trimble lmaoo😂😂😂
Wym
@@nobody8147 wd 40 ruins your bearings pretty hard
Dudeeeee omggggggg 💔💔💔💔 y tf did I not read the comments before
Omg pls help how do I put the wheel back on?!?!
Put one small ring(if u have one) on the bolt thing on you truck then put 2 bearing on there then another small ring and then push the wheel on it so that the bearings Will click inside the wheel and then Just screw the ring thing back idk how its called in english
I hope my explanation was clear lol my English is kinda bad
My explanation was't clear Btw pls Just search on yt
wd40 ruins bearings soooo
Do you know what I should use? I've been looking for a way to make mine faster bc they dont like to spin but every way I've seen tells me to use this way although everyone in the comments say something else
gubeycoon motor lubricant or olive oil
@@trailsenders100 motor lubricant or Olive oil (ignore,its just to copy and get one
I need a faster board, my wheels only roll for 1 sec and a little half
it sucks
Don't use wd40 on your bearings lol. Reds will last a long ass time and when they get bad just buy new ones
I used canola oil omg
No you clean en with acetone you don't just buy new ones and get rid of ones that can be cleaned and be the same quality
the WD40 is taking off the oil in your bearing the bearing will rust
Wd 40 gets rid of rust
@@ashtontotter7127 it is also sticky
Please do subscribe
It's motivates me to make new video like this and Please share your ideas what's the next video should be on...
New video how to make your skateboard faster: ua-cam.com/video/qfDH3egC3Ro/v-deo.html
My skateboard is gonna be new so I don’t need to take them out all I need to do is loosen them
Crazy-Fehlize oh thanks, I thought my new skateboard needed to do this
I had a stroke trying to understand this
Acetone,dry it, speed cream. That is it nothing else
Where are u from?
Dude that's good bearing, I have shirt bearings😫💔.
I only have 4 bones red bearing any spears🙋🙇💔?
He kill these bearings
My skateboard is now loud as hell
Yuh for new skaters don’t use WD 40 😂 just go to your local skate shop and pick up some bearing cleaner and speed cream
There aint a skate shop in my town :(
@@siirimaria3815 ebay
Bones speed cream online
The fact that he doesnt have a skate tool annoys me
Its becuz he is a noob nobody uses wd40 to clean bearings that Will Just ruin them
For those who think 5 minutes is too long. Theres always an 2.0x speed button
Maybe don‘t show each step for each fucking wheel man
It might be an idea to take the shield off the bearings, then clean with something like isopropyl alcohol, then leave to dry or use a hairdryer. (The alcohol evaporate really quickly but I hairdyer to be safe), then finally put some bones speed cream in there and give a spin. No need for any WD 40
Does hand sanitizer work
I don't skate but this video is so good...
No its not
Its terrible its bad info
As soon as the WD-40 comes out I stopped watching. this is dumb
WD40 will have your bearings seized up in no time
Thanks btw whos john faze?
NO DOnT UsE WD-40 IT RUINsBEARINGS AND ATTRACTS DIrt
I'm poor I made a skateboard out of my door I need help buy me a skateboard
Bro skipped lubricate part
can we talk about trying to clean the bearings with the shields still on
How many bearings do I put in each wheel?
@@Sb-hj1om 2
Memes _Playz 5
@@trailsenders100 no Just no
If you wanna go super fast I would buy a longboard
Thanks bro
Effort but helpful
Wd40 ruins the bearings
WD40 IS A BAAADDD IDEA IT TURNS IT TO SHIT
His bearing look like there 8yrs old
Use acetone or nail polish remover or any type of citrus cleaner to clean them and then use bones speed cream to lube them up
Modern is da best
Hi guys what should I make my next video on... I'm thinking to come back to UA-cam...
Dissecting live human
Bro, I mean you shouldn't make these vids anymore cuz u made the bearings bad, make some gameplay videos ooorr try to learn different skills, like: learning to backflip, doesn't have to be a specific amount of time, just that you did it
It didn’t work
Why is it so sad
How did u get those thing circled out at 2:20
Their the middle parts of the wheel just you something that has a pointy shape and use it to take it out
Just got a new 540 Tony hawk board. Its slow as fuck its all brand new any suggestions ?
please don't use wd40 on bearings for a cleaner. they will rust and you will have to keep reapply. use bones speed cream for lube. if you want a strong cleaner you can use acetone.
Please dont use wd-40 it will ruin your board and the wheels will barely move in the next couple of days
Add only a little.
Did not work
thank you sir
even i did the say thing and still dont work
Very helpful thank you so much it works😎😎
Great video but can't we simply use water to clean the bearings?
It will make the bearings rust
How to ruin bearings
Bruh I done this and it's like dodgy now
You need new bearings. DW-40 isn't a lubricant it's made to clean off lubricants but a lot of people misunderstand the usage of it. this dude probably made this video to trick people. If you buy descent bearings and a skateboard bearing cleaning and lubing kit you should be set for 2 years
@Mitchell Nova very fuckin true
Only use wd40 if you plan on putting more oil in them.
No Just dont
@@doyouevenskate2718 well, I mean it's good to get the old oil and dirt out. But you still need a lubricant.
Thanks
Thank you so much! This helped a lot ! 🤩💯
Amazing editing. with the music ... Harmonic
What if u don’t have wd 40
Olive oil
I just used oil and it is really fast that I wrecked in a bush
Angel Ramirez is it still fast or did it break?
Then you are Lucky cuz wd40 destroys ya bearings
OR JUST GET NEW SETUP
Can i use WD40 ?
Thanks for the video man