I told you, to expect more english posts LOL. You can't keep that level of detail secret sir. Stunning as always! Your channel really did get me into customizing....and masking. Pretty much my gunpla skills have gone from newb - to......a newb, not afraid to cut up a large brand new kit? Thanks Ravi???
Good evening Ravi,need some advice from you. I am starting to paint my Gundam models and I want to know which solvent do you use to remove the enamel paint and the panel line accent excess. Thank you for your help. Best wishes from Spain.
@@spartanvenom5388 i thought the same at first but then realized something: These are models of giant robots. It may look like too much detail at first, but consider it in scale and this approach becomes more realistic.
Spartan Venom that ugly ass unicorn gundam that everybody loves has too much detail. Its like an 8yr old made it.. this is gunpla perfection right here. The patience and time and skills applied here, my eyes start hurting just painting tiny lines and this guy does it x1000 lol.
The guys at the top have similar patience and attention to detail. This channel though, is the only one bent on Growing that competition. Very generous with his knowledge and attentive to his posts! Im subscribed to 40 gunpla channels, but Ravi is my goto.
It's relaxing to watch sure. But if you do this yourself, amount of plastic powders you would make and smell of chemicals from paint, thinner, top coat will make it very un-relaxing lol. But it sure feels rewarding after finishing the piece.
@@dirtiestharry6551 exactly. Everyone saying something is "relaxing" is getting pretty old. This amount of detail is not relaxing at all, its pretty intense.
@@redeemer66666 but it's still an intense process. It's a lot of work and you wanted to come out just right. Sure it's satisfying but I wouldn't say relaxing. Maybe the same feeling as finishing a day of hard work?
If you fked up painting, theres a lot of work to redo. If you fked up engraving, you need to buy replacement part. Considering the postage, if you live in certain countries, fking up 5 parts means youd better buy another kit. So I wouldnt say it is relaxing lol. Gunpla is not expensive in terms the money/time to enjoy ratio, but a lot of ppl wouldnt touch engraving because of the above reasons.
you are a inspiration, seriously. I'm new in gunpla, but you are my new goal. I was wishing buy for the fun, but now is for the challenge and of course the process.
right? The man is OCD in the best way. I also notice 0 cats and children kicking his door in every 3 minutes or jumping on his workstation. Maybe; I would be patient too, if I had a fortress of solitide! hmmm
Its not impossible but i would believe extremely difficult but with the right preperation i think it could be done not by me at my current level but it could
I don't know where you get the idea for where you put your lines, but your eye for design is excellent. The end product is so cohesive and intresting to look at
Wow i have just finished my first gunpla, an exia, i was considering taking on something of a higher grade, but i see now i have a lot to learn thank tou you for this video it has inspired me build more and to aim for better than just out of the box building
I can see doing one leg, or one arm, after spending an obscene amount of time of course, but making the other leg/arm exactly symmetrical is mind boggling....👏🏻👏🏻👏🏻👏🏻👏🏻
Outside of his patience and attention to detail, Ravi seems to have, a master eye for laying out his details. He is the top spot that I have found online. Check out Jenic and Peco's modeling....these 2 dorks are able to freehand their scribes. *mind explodes*
Thank you so much for your video , but I ready had to ask you, how can you make scribe a clean and event depth panel line ? For example , when make a 0.5 mm panel line , the two ends is always not have sharp corners and the depth is not even throughout the line. I’m learning from your video. Thank you again for your great videos.
If we all have the patience to mask off all of our scribe lines, then we can make perfect looking scribes too. Don't feel bad if you cut all the way through or can't freehand scribe lines.(the norm). Ravi cut through a piece.......once. lol He is a great teacher, but it is like having Beethoven as a teacher. We will get better, but never be a Beethoven. *sigh* If you are just starting your scribes, then grab some dymo label tape as your guides. Dymo tape gives you a straight edge guide without........um......."the Ravi level of patience" . Happy customizing!
4 pieces of dymo tape make a very thin box to cut inside of. Start with the very tip touching one end of your ( taped off )"channel", and drag backwards. turn it around, then do the same from the opposite end. The cutting from each direction witll help square up your ends as well as keep the depth a little more consistent..... It is better to barely apply pressure and cut a dozen times vs cut once or twice, but risk going through or ending up with inconsistent panel line depth. Hopefully this is making sense via text. You want your head to Really explode, then watch Peco's modeling or Jenic's channel....these guys aren't on Ravi's level, but they both freehand most of their scribe lines. It's almost depressing. Good luck!
If a panel line stops in the middle of a piece, then add a little rectangle to the end. If the ends of your panel lines; refuse to shape up, then add a tiny styrene detail piece over the ends of panel lines. You can also get a very thin chisel and chisel the ends square. I hope this helps. These are common problems actually, so fear not
Dude srsly?the best thing i can give you is buy a Mr.mark setter.put yr waterslide in water,leave it for 5-10 seconds than dry it just a little bit on a tissue so its not so watery and apply mark setter in the place that you want to stick the decals before you put it
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
jackers7@naver.com or instagram DM (ravi_pla)
Notice - blog.naver.com/jackers7/222348230829
디테일업 작업 영상을 못 보신 분들을 위해 앞부분에 하이라이트 영상을 넣었습니다.
For those of you who haven't seen the detailed work video, I've inserted the highlight in the beginning.
I told you, to expect more english posts LOL. You can't keep that level of detail secret sir. Stunning as always! Your channel really did get me into customizing....and masking. Pretty much my gunpla skills have gone from newb - to......a newb, not afraid to cut up a large brand new kit?
Thanks Ravi???
Good evening Ravi,need some advice from you. I am starting to paint my Gundam models and I want to know which solvent do you use to remove the enamel paint and the panel line accent excess. Thank you for your help. Best wishes from Spain.
José Luis Estopiñá Ojeda to remove the tamiya panel line accent, I use a zippo lighter fluid.
@@blaaaaaaaa2017 Thanks for asking that question. Good to know.
혹시 HG나 SD급의 디테일업 작업을 할 의향이 있으신가요?
He's patient enough to count every star in the sky
Jarron Mixon patience isn’t that big a roll here unless he messed something up and had to redo or if he wasn’t enjoying it in the first place
He has that number if you need it for something! LOL
He's patient enough to count every pieces of rice
no he cannot now shut up
Phuong Truong yo why such a bummer? Mom never loved you? Dad left? Parents blame you for their divorce? Tell me.
I don't even do models, but this is actually great learning material for concept art and 3D modeling if you can believe me.
you don't have to build the OTHER leg in your 3D modeling software. You should thank the inventor of copy & paste.
the time care and skill put into this make it a true piece of art
But it may be bordering on too much detail.
@@spartanvenom5388 i thought the same at first but then realized something:
These are models of giant robots. It may look like too much detail at first, but consider it in scale and this approach becomes more realistic.
Spartan Venom that ugly ass unicorn gundam that everybody loves has too much detail. Its like an 8yr old made it.. this is gunpla perfection right here. The patience and time and skills applied here, my eyes start hurting just painting tiny lines and this guy does it x1000 lol.
Painting can be practiced, but the way of his cutting and carving the gunpla is sick.
Nice pfp
*NoW FoR ThE OtHeR LeG*
=O
Onoreeee!!!
oh fuc* you right :o
owh shit, another part 😂
프라모델.... 관심도없고 사본적도없는데 스킵안하고 끝까지 다본적은 처음인듯ㅎㅎ
어떤것이든 디테일을 준다는것이 정말 정성과시간 노력등이 엄청나게 소모되는건데 대단해요
화이팅하세요!
This is like the Olympics level of Gunpla building. So much detail, so many ideas it's given me to upgrade my Gunpla.
Insane skill, creativity and patience, thank you for the video. I can't fathom why a person would downvote this except out of jealousy.
説明書がこの通りにあったとしても、まったく作れる気がしない...
素晴らしい技術！尊敬させていただきます！
와...건프라로 예술작업을 너무 잘봤습니다.
Meanwhile I'm over here feeling accomplished for just having finished the thing. The amount of skill and detail here is amazing.
ここまで来ると、もはや芸術ですね。近くでずっと見ていたいです。
정말 멋집니다.
몇몇 일본분들은 과도한 디테일업이 오히려 실용성을 해치는 디자인이 아닌가하고 갑론을박을 펼치고 계시네요
하지만 개인적으로 이 정도의 디테일이라면 오버해도 좋다고 생각합니다!
정말 멋져요!
This must be the best looking Sazabi out there. Amazing job!
Its got some impressive competition. The custom Sazabis I've seen...
The guys at the top have similar patience and attention to detail. This channel though, is the only one bent on Growing that competition. Very generous with his knowledge and attentive to his posts! Im subscribed to 40 gunpla channels, but Ravi is my goto.
この技術で、あえてロボダッチのタナゴローとか（ロボダッチ好きなので）デティールアップしてほしいです。凄すぎる。この出来のモビルスーツ、一生机の上に置いて眺められると思います。
I wish i could take lessons to do this its so relaxing and the end result is amazing
It's relaxing to watch sure. But if you do this yourself, amount of plastic powders you would make and smell of chemicals from paint, thinner, top coat will make it very un-relaxing lol. But it sure feels rewarding after finishing the piece.
@@dirtiestharry6551 exactly. Everyone saying something is "relaxing" is getting pretty old. This amount of detail is not relaxing at all, its pretty intense.
@@redeemer66666 but it's still an intense process. It's a lot of work and you wanted to come out just right. Sure it's satisfying but I wouldn't say relaxing. Maybe the same feeling as finishing a day of hard work?
@@redeemer66666 and that's an amazing Enterprise by the way. You did a great job.
If you fked up painting, theres a lot of work to redo. If you fked up engraving, you need to buy replacement part. Considering the postage, if you live in certain countries, fking up 5 parts means youd better buy another kit. So I wouldnt say it is relaxing lol. Gunpla is not expensive in terms the money/time to enjoy ratio, but a lot of ppl wouldnt touch engraving because of the above reasons.
Wow... anyone who can modify their Gunpla to this level has my utmost respect. Thanks for sharing! #subbed
こりゃすげぇ…
片足だけでも飾る価値がある。
와.. 버카 사자비 처음 작업 영상이 1년전 영상이네요... 장인정신이라는걸 간접적으로 느끼고 갑니다. 멋지세요.
뭔진모르겟지만 개쩐다..
音楽が良いのでついつい魅入ってしまう。
손작업도 손작업인데 저런디테일이 머릿속에서 떠오른다는게 신기하다. 그리고 대칭잡는것도
이런 엄청난걸 이제서야 보다니... 진짜 실소 밖에 안 나옵니다; 얼마나 노력하고 연습하셨을지 감히 감도 안 잡히네요.
Just the body arms and other leg left to go dam dis guy good and he got dat patients
That's insane, you made that into a beautiful masterpiece!
음 실제 작업하는 과정을 디테일하게 보는 건 처음인데 실로 감동적이군요.
you are a inspiration, seriously. I'm new in gunpla, but you are my new goal. I was wishing buy for the fun, but now is for the challenge and of course the process.
You are a GOD...of miniature customization.
Ravi: I want to add some more detail to this kit.
Everyone: Ok, how much?
Ravi: Yes.
技術もすごいけどデザインのセンスが素晴らしい！
同意。センスと一体になって初めて完成する素晴らしい例。
Definitely did not skip on leg day. Great job 👍
The little green dots in the kneecap make it look like M-O from Wall-e got a fancy new japanese upgrade.
Better in every way - looks REAL afterwords - as if every peice was specifically designed to do its job- LOVE YOUR WORK
I forgot halfway through that it was just a leg and the amount of time is nuts, good stuff man
技術が凄すぎて脳が震えるッ！
But seriously, this is a job well done at making it look like a real piece of science fiction war machinery.
Best Sazabi build I have seen upto this date. Immense work but still looks subtle
Damn.. I saw the title, watched the entire video, and then still wondered when the rest of the body would be covered. Good stuff
I never had this excitement in a while
I’m very impressed. Respect the patience & skills. Keep up the good work👍
I'm not sure how I wound up here. It's not even 3am. Glad I stayed, though.
You made the original ver ka looks like a HG. I can look at this all day.
Craftsmanship as it's finest.
Awe, wanted to see the whole thing assembled. The leg joint area at the top was a nice touch with the off white design. 👍
정말 금손이네요 ㅎㅎ 정말 여려운대
Each process shown is so satisfying
Savage, your combination of skills and patience is really amazing. i learn a lot from your content thank you for sharing
right? The man is OCD in the best way. I also notice 0 cats and children kicking his door in every 3 minutes or jumping on his workstation. Maybe; I would be patient too, if I had a fortress of solitide! hmmm
凄まじいですね！ 凄すぎて参考にすらなりません！ 褒め言葉です
The most beautiful Gunpla ever. I want to marry that Sazabi 😍
I've never seen beautiful painting and sofisticated line carving.
This guy is craaazy. Look at the detail just for the foot guard.
ただただ凄い、、、この感じ私は好きw
You make that looks so easy. Such amazing workmanship.
Thanks for the great videos
デカールを貼る際に、マークセッターを使用することを推奨します
美しい作品ですね😊
Hey i just wanted to say that you have the best nails in the Gunpla UA-cam game. Also this is outstanding work.
All of that for just a leg? Respect bro
As an OC person, your channel is very pleasant. I hope you continue each build through ordered playlists! Hope to see more custom kits from you
誰が見ても分かるレベルの技術力の高さ。素晴らしいです
けどMSの装甲として見た場合ちょっとパネル分割しすぎなんじゃないかと思う、好みの問題もあるだろうけど
でもリアルで作ろうと思うとこうなるよね
細かい溝のお掃除が気になる…。
@@user-vd7pc2he1o サムネ見た感じだとbeforeのほうがかっこよくみえる。
あとリアルって細かいことだけがリアルじゃないよ？車とか飛行機とかメカの外装みてみなよ。案外シンプルにまとまってるもんだよ。
そうですね。僕が間違ってました。
@@user-sg8li3kz2k そら戦闘を想定していない乗り物ならそうなるよ
戦闘機なんか継ぎ接ぎだらけやし、軍事車両だって塗装を剥がしたら板金痕だらけやで
사자비의 다리가 저렇게 섹시했었다니... 화장실에서 봤길래 다행이지, 다른 곳이었으면 바지가 위험할뻔 했습니다. 그냥 말이 안 나오는 경지십니다!!
디테일업 다리만 저렇게 하는데도 시간 엄청 잡아먹는데 ㅋㅋ 다하고 나면 개뿌듯함 ㅋㅋ 너무 멋져요~
Doing all those exact details on the other side by hand seems impossible to me
I got 2 channels I watch, that freehand all their panel lines. Kinda depressing. Ill stick to dymo tape!
Its not impossible but i would believe extremely difficult but with the right preperation i think it could be done not by me at my current level but it could
한가지 일에 미친사람만이 할수있는
장인정신이네요 .. 이정도면 명장
It is a brilliant video if you are not interested in the actual topic but you still can't get your eyes off the screen ^^
Fascinating how the layers of color do not make assembly difficult...
I don't know where you get the idea for where you put your lines, but your eye for design is excellent. The end product is so cohesive and intresting to look at
Wow i have just finished my first gunpla, an exia, i was considering taking on something of a higher grade, but i see now i have a lot to learn thank tou you for this video it has inspired me build more and to aim for better than just out of the box building
頑張ったなぁ。
日本語伝わるかどうかわからないけど
本当にすごい。
the gloss topcoat would make this shine better !!! but all in all an insane mod, so much details in a small package !
Honestly this is too good for words. I wish I had a fraction of the skill, but I’d sure love to learn
I can see doing one leg, or one arm, after spending an obscene amount of time of course, but making the other leg/arm exactly symmetrical is mind boggling....👏🏻👏🏻👏🏻👏🏻👏🏻
I turn these on when I build rc cars etc. Love these vids, remember trying to mimic this detail when I built kits. Beautiful
This is what make the difference between pro and amateur modeller
Very high attention to detail (and highly chance s/he made the blueprint first)
Can't wait to see the full assembly bro🖤
I'm always blown away by your work but wow.... just wow... this build is definitely award winning GBWC level.
You blow me away, *everytime*
Outside of his patience and attention to detail, Ravi seems to have, a master eye for laying out his details. He is the top spot that I have found online. Check out Jenic and Peco's modeling....these 2 dorks are able to freehand their scribes. *mind explodes*
こんな複雑で緻密な作業を左右対称にやるとか、ちょっと意味わかんない。芸術。
이런분들 보면 참 대단합니다.
전 일반 조립에 먹선 넣는것도 힘든데
丁寧な作業で好き
이정도면 건담 장인이네 건담의 덕력 내공이 없으면 불가능하다..ㄷㄷㄷ
제가 잘모르지만 이 영상을 보고 다른 영상을 찾아봤는데 여기가 더 디테일하고 멋있네요!
알고리즘에 이끌려서 왔더니 와.........
보면서 경이롭다는 생각밖에 안나네요
구독박고 갑니다
こんな技術あったらガンプラめちゃくちゃ楽しそうだなぁぁ……
ただでさえ楽しいのに
진짜 영상 되게 잘보고있습니다.
사람손으로 이런게 가능하다니 이건 디테일업이나 커스텀 수준이 아니라 재창조네요;;; 존경스럽습니다.
매번 영상 올라올때마다 잘보고잇습니다. 브금도 조아서 보고 또 돌려보고 보고보고 보다 잠들고 햐 진짜 클래스가 다르시네여
과찬이세요^^ 많이 봐주신다고 하니 기분 좋네요^^ 감사합니다~
すっげー、こまけー！
ナイチンゲールもバリバリにやってほしいーな
So there really people who ACTUALLY custom build this thing... THAT'S AWESOME!! I thought that was just in the anime
This person is really brilliant!
One day, I will follow your work, step by step
와 저렇게 하니까 만화나 완구가 아니라 진짜 있을법한 느낌이 드네요
Thank you so much for your video , but I ready had to ask you, how can you make scribe a clean and event depth panel line ? For example , when make a 0.5 mm panel line , the two ends is always not have sharp corners and the depth is not even throughout the line.
I’m learning from your video. Thank you again for your great videos.
If we all have the patience to mask off all of our scribe lines, then we can make perfect looking scribes too. Don't feel bad if you cut all the way through or can't freehand scribe lines.(the norm). Ravi cut through a piece.......once. lol He is a great teacher, but it is like having Beethoven as a teacher. We will get better, but never be a Beethoven. *sigh* If you are just starting your scribes, then grab some dymo label tape as your guides. Dymo tape gives you a straight edge guide without........um......."the Ravi level of patience" . Happy customizing!
4 pieces of dymo tape make a very thin box to cut inside of. Start with the very tip touching one end of your ( taped off )"channel", and drag backwards. turn it around, then do the same from the opposite end. The cutting from each direction witll help square up your ends as well as keep the depth a little more consistent..... It is better to barely apply pressure and cut a dozen times vs cut once or twice, but risk going through or ending up with inconsistent panel line depth. Hopefully this is making sense via text. You want your head to Really explode, then watch Peco's modeling or Jenic's channel....these guys aren't on Ravi's level, but they both freehand most of their scribe lines. It's almost depressing. Good luck!
I'm sorry. It's hard for me to understand your question exactly.
If a panel line stops in the middle of a piece, then add a little rectangle to the end. If the ends of your panel lines; refuse to shape up, then add a tiny styrene detail piece over the ends of panel lines. You can also get a very thin chisel and chisel the ends square. I hope this helps. These are common problems actually, so fear not
Meanwhile I just struggle to apply the water-slides.
i dont even know how to do that
Dude srsly?the best thing i can give you is buy a Mr.mark setter.put yr waterslide in water,leave it for 5-10 seconds than dry it just a little bit on a tissue so its not so watery and apply mark setter in the place that you want to stick the decals before you put it
detail has never looked as good as this. Amazing
Do you actually work on both side at the same time and just showing one side? I have to agree, maintaining symmetry would drive most insane!
見とれて口が空いてた。凄すぎ。
I strive to be as good as you. Honestly this blows me away. Great Job!
OUTSTANDING! I can't believe how crazy detailed is.
Thanks for share, you are the master.
고쳐진 모습을 보면 네오지온의 엔지니어들이 얼마나 고생해서 만들었는데 이걸 샤아가 막굴려서 박살을 내다니..하는 생각이 들어버립니다 ㅎㅎ
한국 채널인데 역시 장인은 알아본다 다른나라에서도 인정하나봄
마스킹 미스 없이 뜯어지는거 보니 희열을 느낍니다^^ 잘보고 가요..
高品質な仕上がり