Great look and ride. This is what I want on my 22 Slt build. I have a 4 inch ready lift already and dont want a huge offset and minimal trimming. I think this might be in the money. What yellow light covers did you use for the fog light?
Thanks, brother. The lights have LaminX tint. I do have a few videos on my UA-cam about using that tint on the Sierra and the 4runner if you want to check those put as well.
Where is your preload set on your icons? I’m at about 1 1/8” and it rides really stiff. I liked it better at 1” but I’m not sure I can make it fit after I trim the fender liner.
Did you have to put any hub spacers? I am looking to upgrade to 17” 9 with 0 offset, but my concern would be it being close or rubbing uca and calipers. I have 2019 at4 with fox 2.5 coils both front n back and ready lift uca. Looking to go 17s . Thanks bro
No hub spacers needed. 0 offset will be a little tighter, but it should be clear. I'd attempt to veryfy because not all wheels clear. For example, the Fifteen52 0 offset wheels do not clear the brakes. I have a bit more room because im running -12 offset.
Did you change your stock gear ratio from 3.42, up? I'm thinking to get 35's I just want to understand if people that have them feel the need for them.. thanks
okay, thanks for the reply. Well, engine wise it doesn’t matter as much. The gear ratio affects the transmission more than anything. But if you’re saying it’s barely a difference that’s the answer i was looking for from someone who runs that setup. Thanks again.
The grille i got from Ebay and had a bodyshop Paint to Match. The fog light bezels i did myself. I sanded the down and used self etching primer. For paint i bought on amazon AC Delco Summit white in an aerosol can.
@Rob yes the bezels come put pulling them straight forward. They are very tight, and you have to pull them with force yet be careful at the same time to not break any tabs.
Nice work.
Thank you!
Great look and ride. This is what I want on my 22 Slt build. I have a 4 inch ready lift already and dont want a huge offset and minimal trimming. I think this might be in the money. What yellow light covers did you use for the fog light?
Thanks, brother. The lights have LaminX tint. I do have a few videos on my UA-cam about using that tint on the Sierra and the 4runner if you want to check those put as well.
Are you side steps factory? If not do you think I could get some for 2011 crew cab Silverado? Also, what wheels are you running?
Very nice looking truck. I really like the 17" rims paired with a 35" tire. One question for you... why did you choose Icon over Fox for your shocks?
I originally wanted King 2.5s with reservoirs all around, but at the time, the price and wait times were insane. I was told an ETA of 9 months.
Where is your preload set on your icons? I’m at about 1 1/8” and it rides really stiff. I liked it better at 1” but I’m not sure I can make it fit after I trim the fender liner.
Its at 1.25" preload. Rides great in and soaks everything up
Did you have to put any hub spacers? I am looking to upgrade to 17” 9 with 0 offset, but my concern would be it being close or rubbing uca and calipers. I have 2019 at4 with fox 2.5 coils both front n back and ready lift uca. Looking to go 17s . Thanks bro
No hub spacers needed. 0 offset will be a little tighter, but it should be clear. I'd attempt to veryfy because not all wheels clear. For example, the Fifteen52 0 offset wheels do not clear the brakes. I have a bit more room because im running -12 offset.
Can you do a quick video on the side steps? I want to see how low they hang down and if they flex when you step on them.
It's already dark here but I can do a quick review on the side steps tomorrow.
Video is up.
Awesome!
which video is it, none of them have a title that says assisted steps
@@davidc310 ua-cam.com/video/Qr89H8bpTgg/v-deo.html
Did you change your stock gear ratio from 3.42, up? I'm thinking to get 35's I just want to understand if people that have them feel the need for them.. thanks
There's no need to. At least with the diesel, you can barely feel a difference compared to the stocks.
okay, thanks for the reply. Well, engine wise it doesn’t matter as much. The gear ratio affects the transmission more than anything. But if you’re saying it’s barely a difference that’s the answer i was looking for from someone who runs that setup. Thanks again.
What wheels are those? I love them!
ua-cam.com/video/6ujv88M4-sU/v-deo.html
where do you get your grill and colour matching trim piece around the fog lights?
The grille i got from Ebay and had a bodyshop Paint to Match. The fog light bezels i did myself. I sanded the down and used self etching primer. For paint i bought on amazon AC Delco Summit white in an aerosol can.
@@automotiveandmore How do you get those off? Can you just pull the bezels off?
@Rob yes the bezels come put pulling them straight forward. They are very tight, and you have to pull them with force yet be careful at the same time to not break any tabs.
@@automotiveandmore do you have a picture on what they look like without them on? Or does it look like the elevation bumper
@Rob the elevation has a different bumper. Our bumper looks terrible and it's obvious there is a piece missing without the bezel.
Do you have TPMS with these wheels?
Yes, and even have a video of re calibrating the TPMs sensors
How much trimming did you have to dO?
Did you watch the video wtf....