At around 12:00, you are using the Curves LFO module as a waveshaper... An easier solution (that won't have problems with internal phase not being reset) is the Transfer module, put it in unipolar mode and use the MSEG the same way as you do with Curves!
Alternatively you can use the Window module which is designed to sum to 1 with itself when shifted at regular interval (like 0% + 50%, or 0% + 25% + 50% + 75%), so you can use multiple Recorder devices with their phase shifted to make the grains even smoother.
You could use Slopes module as well instead of Curves, wrap and amplify. Turn off the phase precord, change the grid to 2x1, draw two triangles and call it a day.
Thanks for this..quick question. How do you route it on the channel? Tried doing the same with note receiver as I have Iwish and I hear nothing just like that on the Iwish FXgrid you made.
Hard to say from afar. What I usually do in such cases is opening an empty project and try it there. Just to avaoid that nothing is interfereing. If that soesn't work you're most likely doing something wrong. So time to open the manual or search for a tutorial. Sometimes the devil is in the details ... Good luck!
@@theRumbleChannel What I meant to say is what is the routing? Obviously this is on an audio channel and not an instrument channel. How do I arm the audio with the device you made (I replicated it by doing the same as you did in the video) but I get no audio coming thru the channel whatsoever. I see you did this via a clip launcher, can you route the audio channel with Iwish gridfx to another channel?
Your videos are very helpful, could you share the complete process of this kick & bass, it is incredible.. greetings
Amazing stuff mate! Very clever as always!!
Nice voice info trick ! Bravo !
U r Brilliant man good job i'm try to do that effect couple of times in the grid with no success tanks u for sharing us ❤
At around 12:00, you are using the Curves LFO module as a waveshaper... An easier solution (that won't have problems with internal phase not being reset) is the Transfer module, put it in unipolar mode and use the MSEG the same way as you do with Curves!
Alternatively you can use the Window module which is designed to sum to 1 with itself when shifted at regular interval (like 0% + 50%, or 0% + 25% + 50% + 75%), so you can use multiple Recorder devices with their phase shifted to make the grains even smoother.
Using the transfer module is great idea :)
You could use Slopes module as well instead of Curves, wrap and amplify. Turn off the phase precord, change the grid to 2x1, draw two triangles and call it a day.
@@mogulla6717 indeed, but I don't like the idea of 2 triangles ;)
dam so cool even batter then the plugin :)
Thanks for this..quick question. How do you route it on the channel? Tried doing the same with note receiver as I have Iwish and I hear nothing just like that on the Iwish FXgrid you made.
Hard to say from afar. What I usually do in such cases is opening an empty project and try it there. Just to avaoid that nothing is interfereing. If that soesn't work you're most likely doing something wrong. So time to open the manual or search for a tutorial. Sometimes the devil is in the details ...
Good luck!
@@theRumbleChannel What I meant to say is what is the routing? Obviously this is on an audio channel and not an instrument channel.
How do I arm the audio with the device you made (I replicated it by doing the same as you did in the video) but I get no audio coming thru the channel whatsoever.
I see you did this via a clip launcher, can you route the audio channel with Iwish gridfx to another channel?